Lesson 11 of 12 · 22 min

Work, kinetic energy and potential energy

Describe work, kinetic energy and gravitational potential energy, use W=FsW = Fs and W=ΔEW = \Delta E, find work from force–displacement graphs and interpret energy–time graphs.

What you will be able to do

  • Describe mechanical work, kinetic energy and gravitational potential energy.
  • Solve problems with W=FsW = Fs, W=ΔEW = \Delta E, Ek=12mv2E_k = \frac{1}{2}mv^2 and ΔEp=mgΔh\Delta E_p = mg\Delta h.
  • Find the work done from the area under a force–displacement graph.
  • Interpret energy–time graphs, including losses.

Push hard against a brick wall for a minute and you will be tired, but in physics you have done no work on the wall: it has not moved. Push a stalled car 10 m down the street and you have. Work is the way forces transfer energy, and following the energy is often the fastest route through a mechanics problem, because energy is a scalar: no directions, no signs for direction, no vectors to resolve.

Definition

Mechanical work

Work is done when a force acts on an object that moves in the direction of the force:

W=FsW = Fs

where FF is the force (or its part) along the displacement ss. Work is a scalar, measured in joules: 1 J=1 N m1\unit{J} = 1\unit{N\,m}.

  • Force along the motion: positive work, energy is given to the object.
  • Force against the motion (friction, drag, brakes): negative work, energy is taken away.
  • No displacement, or force at right angles to it: no work.

In which situation is no work done on the box?

Choose one answer

Definition

Kinetic and gravitational potential energy

Kinetic energy is the energy an object has because it moves:

Ek=12mv2E_k = \frac{1}{2}mv^2

Double the speed and the kinetic energy quadruples, the v2v^2 dependence Émilie du Châtelet argued for.

Gravitational potential energy is energy stored by an object's height in a gravitational field. Raising or lowering it by Δh\Delta h changes it by

ΔEp=mgΔh\Delta E_p = mg\Delta h

Work changes energy. The work done on an object equals the energy it gains or loses:

W=ΔEW = \Delta E

The net work done by all the forces equals the change in kinetic energy. Work done against gravity becomes gravitational potential energy. Work done against friction becomes thermal energy.

Worked example

Work done against friction and the final speed

  • Complex familiar
  • Technology active

A 40 kg crate starts from rest and is pulled 12 m across a level floor by a horizontal force of 250 N. The friction force is 130 N. Determine

(a) the work done by the pulling force

(b) the work done by friction

(c) the final speed of the crate.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. W = Fs for each force, negative when the force opposes the displacement.

  2. Net work = change in kinetic energy.

  3. Solve the kinetic energy equation for v.

Watch out for

  • Using only the pulling force, which gives 12 m/s.

  • Forgetting the square root in the last step.

Calculate the kinetic energy of a 1200 kg car travelling at 20 m s−120\unit{m\,s^{-1}}.

in J

Give 2 significant figures.

A 15 kg box is lifted from the floor onto a shelf 1.6 m high. Calculate the increase in its gravitational potential energy.

in J

Give 2 significant figures.

Conservation of mechanical energy. If gravity is the only force doing work, the total mechanical energy Ek+EpE_k + E_p stays constant: every joule of potential energy lost becomes a joule of kinetic energy. For an object dropped or sliding down a smooth slope through a height Δh\Delta h,

12mv2=mgΔh⇒v=2gΔh\tfrac{1}{2}mv^2 = mg\Delta h \quad\Rightarrow\quad v = \sqrt{2g\Delta h}

The mass cancels, so a marble and a bowling ball dropped from the same height land at the same speed (without air resistance).

A 0.50 kg ball dropped from 4.0 m with no air resistance. The energy changes form, but the total stays at 19.6 J19.6\unit{J}.

Worked example

Speed of a dropped ball from energy

  • Simple familiar
  • Technology active

A 0.50 kg ball is dropped from a height of 4.0 m. Ignoring air resistance, calculate

(a) the gravitational potential energy it loses by the time it reaches the ground

(b) its speed just before it hits the ground.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Loss in EpE_p = mgΔhmg\Delta h.

  2. With no losses, gain in EkE_k = loss in EpE_p.

  3. Solve 12mv2=mgΔh\frac{1}{2}mv^2 = mg\Delta h for v.

Force–displacement graphs. When the force changes as the object moves (a spring, a bow, an elastic rope), W=FsW = Fs with a single FF does not work. Instead, the work done is the area under the force–displacement graph, because each thin strip has area F ΔsF\,\Delta s. Use rectangles, triangles and trapezia.

Worked example

Energy stored in a drawn bow

  • Simple familiar
  • Technology active

The graph shows how the force needed to draw a bow increases as the string is pulled back 0.60 m. Determine the work done drawing the bow and, assuming all of it becomes kinetic energy of a 25 g arrow, the arrow's launch speed.

Force–displacement graph for drawing the bow.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Work = area under the force–displacement graph.

  2. Split the area into triangles and rectangles if needed.

  3. Equate the work to the kinetic energy gained.

Watch out for

  • Using the maximum force: 180×0.60=108 J180 \times 0.60 = 108\unit{J}, double the true work.

  • Leaving the mass in grams.

The graph shows the horizontal force applied to a trolley as it moves 0.50 m. Determine the work done by the force.

in J

Give 2 significant figures.

Energy–time graphs. These show how the forms of energy share out during a motion. Read them by asking three questions: which curve is which (check the starting conditions), what happens to the total, and where curves cross or reach zero. A horizontal total means no energy is leaving the mechanical forms; a falling total means work is being done against friction or drag, or energy is lost in a bounce.

Worked example

Reading an energy–time graph for a falling ball

  • Complex familiar
  • Technology active

A 0.20 kg ball is dropped from rest at a height of 2.0 m. The graph shows its gravitational potential energy, kinetic energy and total mechanical energy until it reaches the ground.

(a) Identify each curve and explain why the total is a horizontal line.

(b) Explain why the curves are not straight lines.

(c) Determine the time at which the kinetic and potential energies are equal, and the ball's height then.

Energy–time graph for the falling ball.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Use the starting conditions to identify each curve.

  2. A constant total means no energy is transformed out of mechanical energy; a falling total means losses.

  3. Read crossings and values, then link them to heights and speeds with the energy formulas.

Watch out for

  • Assuming the energies are equal halfway through the time. The ball covers the second half of the height faster.

The graph shows the total mechanical energy of a ball dropped onto a hard floor. Which statement best explains its shape?

Choose one answer

Common mistake

Work and energy slips

  • Using W=FsW = Fs with the maximum force when the force varies. Find the area instead.
  • Forgetting that friction does negative work. The net work, not the work of one force, equals ΔEk\Delta E_k.
  • Using heights in centimetres, or masses in grams, in mgΔhmg\Delta h and 12mv2\frac{1}{2}mv^2.
  • Forgetting the square root when solving 12mv2=E\frac{1}{2}mv^2 = E for vv.

Tip

Energy or equations of motion?

If a question involves speeds, heights and distances but not time, energy is often quicker and avoids sign errors, and it works even when the path curves. If it asks for a time, or the acceleration, use the equations of motion.

Summary

  • Work W=FsW = Fs transfers energy; positive when the force is along the motion, negative against it, zero with no displacement.

  • Ek=12mv2E_k = \frac{1}{2}mv^2 and ΔEp=mgΔh\Delta E_p = mg\Delta h, in joules.

  • W=ΔEW = \Delta E: net work equals the change in kinetic energy.

  • With only gravity doing work, Ek+EpE_k + E_p is constant, so v=2gΔhv = \sqrt{2g\Delta h}.

  • Work is the area under a force–displacement graph.

  • On an energy–time graph, a constant total means no losses; a falling total means energy transformed by friction, drag or impacts.

Finished the lesson?

Try the 5 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 11 of 120% read

Save your progress with a free account