Lesson 4 of 12 · 22 min
The constant acceleration equations
Derive , and from a velocity–time graph, then choose and apply them to braking, take-off and vertical motion under gravity.
What you will be able to do
- Explain where the three constant acceleration equations come from.
- Choose the right equation by listing , , , and with signs.
- Solve multi-stage and vertical-motion problems, with the sign of g stated.
With a 1.5 s reaction time and firm braking, a car at 60 km/h needs about 45 m to stop. At 70 km/h it needs about 56 m, and the extra 11 m is often the difference between a near miss and a collision. Where do numbers like that come from? Nobody crash-tests cars on every street. They come from three equations that predict motion whenever the acceleration is constant.
You already have everything you need to build them: the gradient and the area of a velocity–time graph.
Change , and the duration, and watch the numbers in each equation update. Check that always matches the end of the velocity–time line.
For uniform acceleration, the area under the line is a rectangle () plus a triangle ().
From the gradient. The gradient is the acceleration, . Rearranged:
From the area. The displacement is the rectangle plus the triangle. The triangle's height is the change in velocity, :
Deriving v² = u² + 2as (and a fourth equation)
The area is also a trapezium with parallel sides and : . This one is not in the formula book, but it is useful when you are not given .
Now eliminate . From , . Substitute into the trapezium equation:
Multiply both sides by and rearrange:
| Equation | Uses | Leaves out |
|---|---|---|
Solving a constant acceleration problem
Draw and choose a positive direction
A quick sketch with an arrow labelled "+" saves sign errors later.
List s, u, v, a and t with signs
Look for hidden values: "from rest" means ; "comes to a stop" means ; "highest point" means .
Mark the unknown and the one you do not need
Choose the equation that leaves out the quantity you neither know nor want.
Substitute, solve, and check
Give units and sensible significant figures, and ask whether the size and sign make sense.
Key idea
Only for constant acceleration
The equations assume the acceleration stays the same for the whole of the motion you apply them to. If it changes (a car accelerates, then cruises, then brakes), split the motion into stages and use the final velocity of one stage as the initial velocity of the next.
A cyclist rolling at accelerates uniformly at for . What is the cyclist's final velocity?
Worked example
Stopping distance including reaction time
A driver travelling at 72 km/h sees a child step onto the road. The driver's reaction time is 0.80 s, after which the car brakes with a constant deceleration of . Calculate the total stopping distance.
Step 1: Convert and set the sign convention
Take the direction of travel as positive. . During braking .
Step 2: Reaction distance (constant velocity)
Before the brakes go on the car still moves at : .
During the reaction time , so reduces to .
Step 3: Choose an equation for the braking stage
Known: , , . Wanted: . Time is not given or needed, so use .
Step 4: Solve for the braking distance
Step 5: Add the two stages
, or to two significant figures.
Try it yourself first, then check the working one step at a time.
Answer
The total stopping distance is about (16 m while reacting plus 31 m braking).
Method
Split the motion into stages with different accelerations.
List s, u, v, a, t with signs for each stage.
Pick the equation that leaves out the quantity you neither know nor need.
Carry values between stages and add the displacements.
Watch out for
Using with , which gives a negative distance (or a square root of a negative number).
Forgetting the reaction distance, which here is a third of the total.
A passenger jet must reach to take off. Starting from rest with a uniform acceleration of , what is the minimum length of runway it needs?
Vertical motion. Near the Earth's surface, any object moving freely under gravity (no air resistance) has a constant acceleration of downwards, whether it is going up, coming down or at the top. That makes vertical motion a constant acceleration problem.
Choose up as positive and use throughout (or down as positive with ). At the highest point . Without air resistance the motion is symmetrical: the time up equals the time down, and the object returns to its launch height at its launch speed.
Worked example
A ball thrown straight up
A ball is thrown vertically upwards from a student's hand at . Ignoring air resistance, determine
(a) the maximum height the ball reaches above the hand
(b) the time taken to reach that height
(c) the ball's velocity when it returns to the hand.
Step 1: Set the sign convention
Take up as positive. Then and for the whole flight.
Gravity pulls down on the way up and on the way down, so the acceleration never changes sign.
Step 2: Use the condition at the top
At the highest point the ball is momentarily at rest: .
Step 3: (a) Maximum height
gives , so
Step 4: (b) Time to the top
gives , so
Step 5: (c) Velocity back at the hand
Back at the hand . , so . The ball is now moving down, so .
Without air resistance the motion is symmetrical. The ball returns at the same speed it left with, now downwards, after twice the time to the top (2.4 s).
Try it yourself first, then check the working one step at a time.
Answer
(a) (b) (c) downwards ( with up positive)
Method
Choose up as positive, so throughout.
At the highest point .
Returning to the launch height means .
Watch out for
Using at the top. The velocity is zero there, the acceleration is not.
Using with , which never brings the ball to rest.
A stone is dropped from rest off a bridge and hits the water later. Ignoring air resistance, how high is the bridge above the water?
Common mistake
The acceleration at the top is not zero
At the highest point of a throw, the velocity is zero for an instant but gravity has not switched off. The acceleration is still downwards. If it were zero, the ball would stay up there.
A ball is thrown straight up. Ignoring air resistance, which is true at the highest point of its flight?
Exam tip
Set the problem out
Write the list (, , , , not needed), then the equation, then the substitution, then the answer with its unit. Markers can award method marks for a correct list and equation even if the arithmetic slips.
Summary
comes from the gradient of a velocity–time graph; from its area.
is the other two with eliminated.
List with signs, then pick the equation that leaves out the quantity you neither know nor need.
The equations hold only while the acceleration is constant; split changing motion into stages.
In free fall downwards at every point, including the top, where .
Finished the lesson?
Try the 4 quick checks above and the lesson completes itself, or mark it complete now.