Lesson 9 of 12 · 20 min

Momentum and impulse

Calculate momentum and impulse, find impulse from the area under a force–time graph, and explain how seatbelts, crumple zones, airbags and good sporting technique use impulse.

What you will be able to do

  • Describe momentum, p=mvp = mv, and impulse, FnetΔt=ΔpF_{net}\Delta t = \Delta p.
  • Calculate impulse, change in momentum and average force, including rebounds.
  • Find the impulse from the area under a force–time graph.
  • Explain car safety features and sporting technique in terms of impulse.

Drop an egg onto a tiled floor and it smashes. Drop it onto a pillow from the same height and it survives. It hits both at the same speed and ends up at rest on both, so its momentum changes by the same amount. What differs is how long that change takes, and that decides the force.

Definition

Momentum

Momentum is mass in motion:

p=mvp = mv

It is a vector in the direction of the velocity, measured in kg m s−1\mathrm{kg\,m\,s^{-1}}. A 1500 kg car at 20 m s−120\unit{m\,s^{-1}} has p=30 000 kg m s−1p = 30\,000\unit{kg\,m\,s^{-1}}; a 0.16 kg cricket ball at 40 m s−140\unit{m\,s^{-1}} has 6.4 kg m s−16.4\unit{kg\,m\,s^{-1}}.

A 60 kg cyclist rides a 10 kg bicycle at 8.0 m s−18.0\unit{m\,s^{-1}}. What is the momentum of the cyclist and bicycle together?

in kg m s -1

Give 2 significant figures.

Impulse. Newton actually stated his second law in terms of momentum: the net force equals the rate of change of momentum, Fnet=ΔpΔtF_{net} = \frac{\Delta p}{\Delta t}. Multiply both sides by Δt\Delta t:

Fnet Δt=Δp=mv−muF_{net}\,\Delta t = \Delta p = mv - mu

The product FnetΔtF_{net}\Delta t is the impulse. It is a vector, in newton seconds (1 N s=1 kg m s−11\unit{N\,s} = 1\unit{kg\,m\,s^{-1}}). A big force for a short time can give the same impulse as a small force for a long time.

Worked example

Impulse and average force on a cricket ball

  • Simple familiar
  • Technology active

A 0.16 kg cricket ball arrives at a bat at 30 m s−130\unit{m\,s^{-1}} and leaves in the opposite direction at 25 m s−125\unit{m\,s^{-1}}. The ball is in contact with the bat for 4.0 ms. Determine

(a) the impulse on the ball

(b) the average force the bat exerts on the ball.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Sign convention first; a rebound gives u and v opposite signs.

  2. Impulse = Δp=mv−mu\Delta p = mv - mu.

  3. Average force = impulse ÷ contact time (in seconds).

Watch out for

  • Calculating 0.16×(25−30)=−0.8 N s0.16 \times (25 - 30) = -0.8\unit{N\,s}, which ignores the change of direction.

  • Leaving the time in milliseconds.

A 0.50 kg ball hits the floor at 6.0 m s−16.0\unit{m\,s^{-1}} and bounces straight back up at 4.0 m s−14.0\unit{m\,s^{-1}}. Taking up as positive, determine the net impulse on the ball during the bounce.

in N s

Give 2 significant figures.

Force–time graphs. In a real collision the force is not constant: it builds up as the objects squash together and falls away as they separate. The area under a force–time graph is the impulse, because each thin strip has area F ΔtF\,\Delta t. Find it with rectangles, triangles and trapezia. Dividing the impulse by the contact time gives the average force.

Worked example

Impulse from a force–time graph

  • Complex familiar
  • Technology active

A 0.40 kg football at rest is kicked. The graph shows the force on the ball during the kick. Determine

(a) the impulse on the ball

(b) the speed of the ball as it leaves the boot

(c) the average force during the kick.

Force on the ball during the kick. Note the time axis is in milliseconds.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Convert the time axis to seconds.

  2. Impulse = area under the force–time graph (triangles, rectangles, trapezia).

  3. Impulse = mv−mumv - mu; average force = impulse ÷ time.

Watch out for

  • Using the peak force for the whole time: 900×0.010=9.0 N s900 \times 0.010 = 9.0\unit{N\,s}, double the true impulse.

  • Forgetting to convert milliseconds to seconds, which makes the impulse 1000 times too big.

The same impulse (60 N s60\unit{N\,s}, the same area) delivered two ways: a hard, short stop and a cushioned, longer one. The cushioned stop needs a peak force five times smaller.

Key idea

Same change in momentum, longer time, smaller force

When something must stop (a passenger, a falling gymnast, an egg), its change in momentum is fixed by its mass and speed. Since FnetΔt=ΔpF_{net}\Delta t = \Delta p, making the stopping time longer makes the average force smaller in the same proportion.

Car safety. Engineers used exactly this reasoning.

  • Crumple zones at the front and rear crush in a controlled way, extending the time the car takes to stop, while the rigid cabin protects the occupants. (Béla Barényi patented the idea in the early 1950s.)
  • Seatbelts stop you with the car instead of a moment later against the dashboard, stretch slightly to extend your stopping time, and spread the force across the strong bones of the hips and chest. Victoria was the first place in the world to make wearing them compulsory, in 1970.
  • Airbags inflate in about 30 ms and let your head and chest decelerate over a longer time and a larger area.

Worked example

Why an airbag reduces the force on a driver

  • Complex familiar
  • Technology active

In a collision, a 70 kg driver moving at 16 m s−116\unit{m\,s^{-1}} is brought to rest.

(a) Calculate the magnitude of the driver's change in momentum.

(b) Calculate the average force on the driver if an airbag stops them in 0.12 s.

(c) Calculate the average force if they instead hit the steering wheel and stop in 0.010 s.

(d) Explain how the airbag reduces the risk of injury.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. The change in momentum is set by the situation: Δp=m(v−u)\Delta p = m(v - u).

  2. Average force = ΔpΔt\frac{\Delta p}{\Delta t}, so a longer time means a smaller force.

  3. In explanations, name what stays the same (impulse) and what changes (time, force).

Watch out for

  • Saying the airbag "absorbs the momentum". It lengthens the time over which the momentum changes.

A gymnast bends their knees on landing. Why does this reduce the force on their legs?

Choose one answer

Note

Impulse in elite sport

Coaches use the same idea the other way round. To give something a large change in momentum, you want a large force for as long as possible: that is why golfers, tennis players and cricketers follow through, keeping the club, racquet or bat in contact with the ball slightly longer. Javelin and shot-put throwers lengthen the push across the whole throw. To catch safely, wicketkeepers and outfielders draw their hands back, extending the time to reduce the force.

A tennis coach tells a player to follow through after hitting the ball. Assuming the average force on the ball stays the same, what is the main benefit?

Choose one answer

Common mistake

Common impulse slips

  • Forgetting that a rebound reverses the velocity: Δv\Delta v is the sum of the two speeds.
  • Leaving contact times in milliseconds.
  • Reading the peak force off a force–time graph instead of finding the area.

Summary

  • Momentum p=mvp = mv is a vector, in kg m s−1\mathrm{kg\,m\,s^{-1}}.

  • Impulse FnetΔt=Δp=mv−muF_{net}\Delta t = \Delta p = mv - mu, in N s\mathrm{N\,s}.

  • Impulse is the area under a force–time graph; average force = impulse ÷ time.

  • For a fixed change in momentum, a longer stopping time means a smaller force. Crumple zones, seatbelts, airbags and bent knees all use this.

  • To give a ball more momentum, apply the force for longer (follow through).

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 9 of 120% read

Save your progress with a free account