Lesson 5 of 12 · 20 min

Measuring g from experimental data

Determine the acceleration due to gravity from drop data by linearising, plotting with error bars and using minimum and maximum lines of best fit to find the gradient's uncertainty.

What you will be able to do

  • Process repeated trials into a mean with an absolute uncertainty, and carry the uncertainty into a squared quantity.
  • Linearise s=12gt2s = \frac{1}{2}gt^2 by plotting t2t^2 against ss, and find g from the gradient.
  • Use error bars and minimum and maximum lines of best fit to find the uncertainty of a gradient and intercept.
  • Compare an experimental value with the accepted value using percentage error.

The data book gives g=9.8 m s−2g = 9.8\unit{m\,s^{-2}} as the mean acceleration due to gravity on Earth. (It ranges from about 9.78 m s−29.78\unit{m\,s^{-2}} at the equator to 9.83 m s−29.83\unit{m\,s^{-2}} at the poles.) You can measure it yourself with a ball, a metre rule and a timer. The physics is one equation; the skill is in handling the data well enough to trust the answer.

The experiment. Release a ball from rest and time its fall through a measured height ss, using light gates, an electromagnet release with a timer, or slow-motion video. Repeat three times at each of at least five heights. The height is the independent variable (you choose it); the time is the dependent variable (you measure it), and it carries most of the uncertainty.

Processed results. Each time is the mean of three trials ± half the range; each t2t^2 uncertainty is double the percentage uncertainty of tt.
Drop height ss (m)Mean time tt (s)t2t^2 (s2\mathrm{s^2})
0.200.205 ± 0.0050.0420 ± 0.002
0.400.287 ± 0.0050.0824 ± 0.003
0.600.354 ± 0.0060.1253 ± 0.004
0.800.407 ± 0.0060.1656 ± 0.005
1.000.457 ± 0.0070.2088 ± 0.006

Worked example

Processing repeated timing trials

  • Simple familiar
  • Technology active

A ball is dropped from rest through 0.60 m between two light gates. Three trials give fall times of 0.348 s, 0.355 s and 0.360 s.

(a) Calculate the mean time and its absolute uncertainty.

(b) Calculate t2t^2 and its absolute uncertainty, for plotting with an error bar.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Mean = sum of trials ÷ number of trials.

  2. Absolute uncertainty = ± half the range.

  3. For a squared quantity, double the percentage uncertainty, then convert back to an absolute uncertainty.

Watch out for

  • Squaring the absolute uncertainty (0.00620.006^2), which makes the error bar far too small.

  • Quoting the mean to more decimal places than the measurements.

Three trials at a drop height of 1.00 m give times of 0.450 s, 0.462 s and 0.459 s. What is the absolute uncertainty of the mean time, in seconds?

in s

Why linearise? A ball dropped from rest obeys s=12gt2s = \frac{1}{2}gt^2. A graph of ss against tt is a curve, and it is hard to read a constant off a curve or to see whether a point is out of line. Rearrange the equation so that it has the form of a straight line, y=mx+cy = mx + c:

t2=2g st^2 = \frac{2}{g}\,s

Plot y=t2y = t^2 against x=sx = s. If the physics is right the points lie on a straight line through the origin, with gradient m=2gm = \frac{2}{g}, so g=2mg = \frac{2}{m}.

Interactive

Fit the linearised data

The least-squares line has gradient about 0.208 s2 m−10.208\unit{s^2\,m^{-1}} and an intercept very close to zero, so g≈20.208=9.6 m s−2g \approx \frac{2}{0.208} = 9.6\unit{m\,s^{-2}}. Drag a point to see how one bad trial pulls the line and changes g.

Key idea

How to linearise

  1. Write the physics equation linking the variables.
  2. Rearrange it into y=mx+cy = mx + c, putting the measured (dependent) quantity, or a function of it, on the left.
  3. Identify what mm and cc represent physically. Here m=2gm = \frac{2}{g} and c=0c = 0.
  4. Plot, draw the line of best fit, measure the gradient, and solve for the constant.

Error bars and the uncertainty of the gradient. Plot each point with a vertical error bar showing its uncertainty. Draw the line of best fit, then the maximum (steepest) and minimum (least steep) lines that still pass through every error bar. These usually join opposite corners of the first and last bars, but check the middle bars too. Then

Δm=±mmax−mmin2\Delta m = \pm\frac{m_{max} - m_{min}}{2}

The same lines give an uncertainty range for the intercept. Here the intercept should be zero; if its whole range excludes zero, suspect a systematic error, such as a timer that starts late.

Worked example

Determining g from a linearised graph

  • Complex familiar
  • Technology active

Students drop a ball from rest through heights ss from 0.20 m to 1.00 m and plot t2t^2 against ss with vertical error bars. The line of best fit has gradient 0.208 s2 m−10.208\unit{s^2\,m^{-1}}. The steepest and least steep lines that pass through every error bar have gradients 0.2180.218 and 0.199 s2 m−10.199\unit{s^2\,m^{-1}}.

(a) Show that the gradient of the graph equals 2g\frac{2}{g}.

(b) Determine gg and its uncertainty.

(c) Calculate the percentage error compared with the accepted value of 9.8 m s−29.8\unit{m\,s^{-2}}, and comment.

t2t^2 against ss, with the line of best fit (solid) and the maximum and minimum lines (dashed).

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Rearrange the physics equation into y = mx + c with the plotted variables.

  2. Match the gradient (and intercept) to the physical constants.

  3. Gradient uncertainty = ± half the difference of the max and min gradients.

  4. Carry the percentage uncertainty through to g.

  5. Compare with the accepted value using percentage error.

Watch out for

  • Writing g=2×0.208g = 2 \times 0.208. The gradient is 2g\frac{2}{g}, not g2\frac{g}{2}, because t2t^2 is on the vertical axis.

  • Drawing the max and min lines through the first and last points only, without checking the middle error bars.

A trolley's velocity–time data are plotted with error bars. The line of best fit has gradient 1.26 m s−21.26\unit{m\,s^{-2}}; the maximum and minimum lines have gradients 1.341.34 and 1.18 m s−21.18\unit{m\,s^{-2}}. What is the absolute uncertainty in the trolley's acceleration?

in m s -2

A second method. Film the falling ball against a scale, or use a ticker timer, and find its velocity at several times. A velocity–time graph of free fall is a straight line whose gradient is gg itself, with the same minimum and maximum line treatment for its uncertainty.

An object falls from rest. Which graph of the measured data should be a straight line through the origin?

Choose one answer

Common mistake

Read what the gradient really is

With t2t^2 on the vertical axis the gradient is 2g\frac{2}{g}, so g=2mg = \frac{2}{m}. If you plot ss against t2t^2 instead, the gradient is g2\frac{g}{2} and g=2mg = 2m. Always write the rearranged equation next to your graph before you calculate.

Note

Uncertainty and error are different

Uncertainty (± a range) describes the spread of your measurements: precision. Percentage error compares your result with the accepted value: accuracy.

percentage error=∣measured value−true valuetrue value∣×100%\text{percentage error} = \left|\frac{\text{measured value} - \text{true value}}{\text{true value}}\right| \times 100\%

A result can be precise but inaccurate if there is a systematic error.

A group measures g=9.40 m s−2g = 9.40\unit{m\,s^{-2}}. Calculate the percentage error compared with 9.8 m s−29.8\unit{m\,s^{-2}}, to two significant figures.

in \%

Give 2 significant figures.

Summary

  • Mean ± half the range for repeated trials; double the percentage uncertainty when you square a quantity.

  • Linearise by rearranging into y=mx+cy = mx + c: for free fall from rest, t2=2gst^2 = \frac{2}{g}s, so plot t2t^2 against ss and use g=2mg = \frac{2}{m}.

  • Maximum and minimum lines pass through every error bar; Δm=±mmax−mmin2\Delta m = \pm\frac{m_{max} - m_{min}}{2}.

  • An intercept range that excludes the expected value points to a systematic error.

  • Uncertainty measures precision; percentage error against the accepted value measures accuracy.

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 120% read

Save your progress with a free account