Lesson 3 of 12 · 22 min
Reading motion graphs
Read velocity from the gradient of a displacement–time graph, acceleration and displacement from a velocity–time graph, and change in velocity from an acceleration–time graph.
What you will be able to do
- Use the intercept and gradient of a displacement–time graph, including a tangent for instantaneous velocity.
- Use the intercept, gradient and area of a velocity–time graph, including areas below the time axis.
- Find a change in velocity from the area under an acceleration–time graph.
A motion sensor or a phone video can turn any straight-line motion into graphs in seconds. Reading those graphs is one of the most examined skills in this topic, because one graph holds a whole description of the motion: where the object started, how fast it went, when it stopped and when it turned around.
The trick is knowing which feature of which graph tells you what. Start by watching all three graphs being drawn at once.
A cart is pushed up a ramp at and rolls back. Watch the moment it turns around: the displacement–time graph peaks, the velocity–time graph crosses zero, and the acceleration–time graph does not change at all.
| Graph | Gradient gives | Area under gives | Vertical intercept gives |
|---|---|---|---|
| displacement–time | velocity | (nothing useful) | starting position |
| velocity–time | acceleration | displacement | initial velocity |
| acceleration–time | (not needed here) | change in velocity | initial acceleration |
Displacement–time graphs. The gradient is the velocity: .
- A straight line means constant velocity; a steeper line means a greater speed.
- A horizontal line means the object is at rest.
- A negative gradient means motion in the negative direction.
- A curve means the velocity is changing, so the object is accelerating.
A displacement–time graph is not a picture of the path. A line sloping down means "moving in the negative direction", not "going downhill".
Worked example
Velocities from a displacement–time graph
The displacement–time graph shows a remote-controlled car on a straight track, with east positive. Determine its velocity during stages A, B and C, and its average velocity over the 16 s.
Displacement–time graph of the car.
Step 1: Stage A — read the gradient
Velocity is the gradient of a displacement–time graph: .
Step 2: Stage B — a flat line
The displacement stays at , so the gradient is zero: the car is stationary for 6 s.
Step 3: Stage C — a negative gradient
. The car moves west at , passes its starting point at and ends 6 m west of it.
Step 4: Average velocity over the whole trip
, so about west.
Average velocity only cares about where the car starts and finishes, not the route in between.
Try it yourself first, then check the working one step at a time.
Answer
A: east; B: stationary; C: west. Average velocity west ().
Method
Velocity = gradient of the displacement–time graph, with its sign.
A horizontal section means the object is at rest.
Average velocity = (final − initial displacement) ÷ total time.
Watch out for
Reading the height of the graph as the velocity: is a position, not a speed.
Thinking stage C is "going down a hill". The graph is not a picture of the track.
When the graph curves, the gradient is different at every instant. Draw a tangent, a straight line that just touches the curve at that time, and find its gradient: that is the instantaneous velocity. The gradient of a straight line joining two points on the curve (a secant) gives the average velocity between them.
Secant: average velocity from 0 to 4 s is . Tangent at 4 s: instantaneous velocity .
The displacement–time graph shows a ball rolled up a slope that then rolls back down. At what time is the ball's instantaneous velocity zero?
Velocity–time graphs. The vertical intercept is the initial velocity , and the gradient is the acceleration, . A straight line means uniform (constant) acceleration. Where the line crosses the time axis, the object stops for an instant and reverses.
The area between the graph and the time axis is the displacement. Each thin strip has area , a small displacement, and the strips add up. Area above the axis is positive displacement; area below the axis is negative.
Worked example
Displacement of a train from its velocity–time graph
A train travels between two stations. Its velocity–time graph is shown.
(a) Determine the acceleration during each stage.
(b) Determine the distance between the stations.
(c) Calculate the train's average velocity.
Velocity–time graph of the train. The shaded area is its displacement.
Step 1: Acceleration is the gradient
Stage 1: . Stage 2: the line is flat, so . Stage 3: .
Gradient of a velocity–time graph , which is the definition of acceleration.
Step 2: Displacement is the area under the graph
Split the area into simple shapes:
- triangle:
- rectangle:
- triangle:
Total: .
Each thin strip of area is , a small displacement. Adding the strips gives the total displacement.
Step 3: Check with one shape
The whole area is a trapezium with parallel sides 105 s and 60 s and height : . The answers agree.
Step 4: Average velocity
in the direction of travel.
Try it yourself first, then check the working one step at a time.
Answer
(a) , , (b) (c)
Method
Acceleration — gradient of each straight section.
Displacement — area between the graph and the time axis, split into rectangles and triangles.
Average velocity — total displacement ÷ total time.
Watch out for
Using the maximum velocity times the total time (), which counts area that is not under the graph.
Averaging the velocities 0, 20 and 0 to get the average velocity.
The velocity–time graph is for a cart on a track, with east positive. Determine the cart's displacement over the 5.0 s.
Common mistake
Height is not area
The value read off a velocity–time graph is a velocity. To find how far something has gone you need the area. And when the graph dips below the axis, the object is moving backwards: subtract that area for displacement, add it for distance.
Acceleration–time graphs. The area under an acceleration–time graph is the change in velocity, for each strip. Add it to the initial velocity to get the final velocity.
A go-kart moving at has the acceleration shown. What is its velocity at ?
Exam tip
Show the graph working
Name the feature you used ("the gradient of the velocity–time graph gives the acceleration"), show the rise and run or the shapes and their dimensions, read values with units from the axes, and give the answer with a unit and a direction. Choose two points far apart on a line or tangent to reduce reading errors.
Summary
Displacement–time: gradient = velocity; a flat line means at rest; a curve means accelerating; a tangent gives instantaneous velocity.
Velocity–time: intercept = , gradient = acceleration, area = displacement.
Area below the time axis is negative displacement. Subtract it for displacement and add it for distance.
Acceleration–time: area = change in velocity.
Split areas into rectangles, triangles and trapezia, and read the units off the axes.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.