Lesson 8 of 12 · 22 min
Solving problems with Newton's second law
Use free-body diagrams and to solve problems with friction, lifts, connected bodies and rockets, and combine them with the equations of motion.
What you will be able to do
- Apply to one object in a horizontal or vertical line.
- Find the normal force on a person in an accelerating lift.
- Solve connected-body problems by treating the system first and then one body.
- Combine Newton's second law with the equations of motion for multi-stage problems.
In a lift that starts moving upwards you feel heavier for a moment; as it slows at the top you feel lighter. A force plate under a sprinter's blocks shows the push spike at the start. In both cases Newton's second law turns forces into accelerations, and the equations of motion turn accelerations into speeds, times and distances.
A method that works every time
Draw the free-body diagram
One object (or one system), every force on it, labelled.
Choose the positive direction
The direction of the acceleration is usually the easiest choice.
Write the net force along that line
Forces in the positive direction minus forces in the negative direction, set equal to .
Solve, then use the equations of motion if needed
The acceleration links the forces to the motion.
A 2.0 kg box is pushed across a floor with a horizontal force of . The friction force is . Determine the box's acceleration.
Vertical problems and lifts. Bathroom scales measure the normal force pushing up on you, not your weight. For a person of mass in a lift, with up positive:
where is positive when the acceleration is upwards and negative when it is downwards.
| Lift is… | Acceleration | Normal force | Feels |
|---|---|---|---|
| speeding up going up, or slowing down going down | heavier | ||
| moving at constant velocity (either way) or at rest | normal | ||
| speeding up going down, or slowing down going up | lighter | ||
| in free fall (cable snapped) | weightless |
Make the lift accelerate upwards, move steadily and accelerate downwards. The weight never changes; only the normal force does. The direction of the acceleration, not the direction of motion, decides whether you feel heavier.
Worked example
Standing on scales in an accelerating lift
A 60 kg student stands on bathroom scales in a lift that is accelerating upwards at . The scales measure the normal force on the student. Determine the reading in newtons.
Step 1: Draw the free-body diagram
Two forces act on the student: the weight down and the normal force from the scales up.
Step 2: Write Newton's second law with up positive
The acceleration is upwards, so the upward force must be the bigger one.
Step 3: Solve for the normal force
.
Step 4: Compare with standing still
At rest the scales would read . Accelerating upwards, the floor must push harder than the weight to provide the extra of net force, so the student feels heavier.
Try it yourself first, then check the working one step at a time.
Answer
The scales read about ().
Method
Free-body diagram with the weight and the normal force.
Take the direction of the acceleration as positive and write .
Solve, then check against mg.
Watch out for
Writing , which forgets the weight.
Using a = −1.5 because "the scales push down". The acceleration of the lift is upwards.
A 70 kg person stands on scales in a lift that accelerates downwards at . What normal force do the scales exert on the person?
Connected bodies. When objects move together (a car and trailer, a train of carriages, two blocks pushed together), they share one acceleration.
- Treat them as one system: only external forces count, and the forces between the bodies cancel in pairs. Find .
- Then isolate one body and apply to it alone, including the connecting force. Solve for that force.
Change the masses and the applied force. Both blocks always share the acceleration (with no friction), and the force between them is just enough to accelerate the second block.
Worked example
A car towing a trailer
A 1500 kg car tows a 500 kg trailer along a level road. The road exerts a forward driving force of 4000 N on the car. Resistive forces are 600 N on the car and 200 N on the trailer.
(a) Determine the acceleration of the car and trailer.
(b) Determine the tension in the tow bar.
Step 1: Treat the car and trailer as one system
The tow-bar forces are internal (the car pulls the trailer, the trailer pulls back on the car), so they cancel. External forces, forward positive: on a total mass of .
Internal forces come in third-law pairs within the system, so they cannot change its total motion.
Step 2: (a) Acceleration of the system
forwards.
Step 3: Isolate the trailer
On the trailer: tension forwards, resistance backwards. .
Step 4: (b) Solve for the tension
.
Step 5: Check with the car
On the car: , so . Both bodies agree.
Try it yourself first, then check the working one step at a time.
Answer
(a) forwards (b)
Method
Whole system first, external forces only, to find a.
Then isolate one body, include the connecting force, and solve for it.
Check with the other body.
Watch out for
Including the tow-bar tension when treating car and trailer together.
Assuming the tension equals the driving force. The tow bar only has to accelerate the trailer and overcome its resistance.
Two blocks sit side by side on a smooth (frictionless) floor: a 4.0 kg block and a 2.0 kg block. A horizontal force of pushes the 4.0 kg block, which pushes the 2.0 kg block ahead of it. Determine the force the 4.0 kg block exerts on the 2.0 kg block.
Forces, then motion. Many problems need both laws in turn: Newton's second law gives the acceleration, then the equations of motion give the speed, time or distance. When the forces change partway through (an engine cuts out, brakes go on), the acceleration changes, so solve each stage separately.
Worked example
How high does a model rocket go?
A 0.50 kg model rocket is launched vertically. Its motor provides a constant thrust of 15 N for 0.80 s, then burns out and the rocket coasts upwards. Treat the mass as constant and ignore air resistance. Determine the maximum height the rocket reaches.
Step 1: Plan in two stages
Stage 1: powered flight with thrust and weight. Stage 2: coasting, with only weight, until . Take up as positive.
The acceleration changes when the motor stops, so one equation of motion cannot cover the whole flight.
Step 2: Stage 1 — net force and acceleration
. , so .
Step 3: Stage 1 — speed and height at burnout
and .
Step 4: Stage 2 — coasting height
Now , , : , so .
Step 5: Add the stages
, about to two significant figures.
Step 6: Evaluate the model
Real rockets lose mass as fuel burns (so they accelerate more than predicted) but feel drag (so they reach less height than predicted). Drag is the bigger effect at these speeds, so 20 m is an upper estimate.
Try it yourself first, then check the working one step at a time.
Answer
The rocket reaches a maximum height of about .
Method
Split the flight where the forces change.
Use Newton's second law for the acceleration of each stage.
Use the equations of motion within each stage, passing the velocity on.
Comment on the assumptions.
Watch out for
Using the thrust alone, , without subtracting the weight.
Stopping at the burnout height and forgetting the rocket keeps rising.
Note
Biomechanics: Newton's laws in sport
Sports scientists measure the forces athletes exert with force plates (platforms that record the push on them hundreds of times a second) and track their motion with high-speed video and motion capture. Newton's second law links the two, and computer models built on the laws test changes to technique before an athlete tries them: a lower start position, a longer final stride before a jump, a softer landing that spreads the stopping force over more time. The same measurements help prevent injuries by showing where forces on joints become too large.
A force plate shows that a 65 kg sprinter receives an average horizontal force of from the blocks. Determine the sprinter's average horizontal acceleration.
Common mistake
Where marks go in force problems
- Leaving the weight out of a vertical problem: instead of .
- Using the applied force instead of the net force in .
- Including internal forces when treating connected bodies as one system.
- Mixing sign conventions between the force and motion stages.
Exam tip
Earn the method marks
Sketch the free-body diagram even when the question does not ask for one, write with every force named, and only then substitute numbers. A correct equation of forces usually earns a mark even if a later step slips.
Summary
Free-body diagram, positive direction, , solve: every time.
In a lift, with up positive: heavier when accelerating up, lighter when accelerating down.
Connected bodies: the whole system first for , then one body for the connecting force.
Use the acceleration from Newton's second law in the equations of motion; split the motion where the forces change.
Biomechanics uses force plates, motion capture and models built on Newton's laws to improve technique and reduce injury.
Finished the lesson?
Try the 4 quick checks above and the lesson completes itself, or mark it complete now.