Lesson 12 of 12 · 18 min

Elastic and inelastic collisions

Tell elastic from inelastic collisions by comparing total kinetic energy, solve collision and explosion problems with both momentum and energy, and analyse a trolley collision investigation.

What you will be able to do

  • Discuss the differences between elastic and inelastic collisions, with examples.
  • Decide whether a collision is elastic by comparing ∑12mv2\sum \frac{1}{2}mv^2 before and after.
  • Calculate the kinetic energy transformed in inelastic collisions and released in explosions.
  • Analyse data from an investigation of a linear elastic collision.

A Newton's cradle clicks back and forth for a long time; two cars in a crash crumple and stop. In both, momentum is conserved, because the objects push each other with equal and opposite forces. The difference is what happens to the kinetic energy, and that is what separates elastic collisions from inelastic ones.

Momentum is conserved in all of these (for an isolated system). Kinetic energy is not.
TypeTotal kinetic energyWhat happensExamples
ElasticConservedObjects bounce apart with no permanent deformation, heat or soundGas molecules; very nearly, steel or pool balls and magnetic bumpers on trolleys
InelasticDecreasesSome kinetic energy becomes thermal energy, sound and deformationMost real collisions: a bat hitting a ball, a tackle
Perfectly inelasticDecreases the most possibleThe objects stick together and move off with one velocityCar crashes where vehicles lock, a dart hitting a board
ExplosionIncreasesStored (chemical or elastic) energy pushes the objects apartFireworks, recoil, skaters pushing apart

Key idea

The test for an elastic collision

Find any unknown velocity with conservation of momentum first. Then compare total kinetic energy:

∑12mvbefore2=∑12mvafter2(elastic)\sum \tfrac{1}{2}mv_{before}^2 = \sum \tfrac{1}{2}mv_{after}^2 \quad \text{(elastic)}

If the total after is less, the collision is inelastic. Kinetic energy is a scalar, so add the terms without signs: v2v^2 is positive whichever way the object moves.

Interactive

Elastic or inelastic?

Switch between elastic, inelastic and perfectly inelastic. The total momentum never changes. The total kinetic energy stays the same only in the elastic case, and drops the most when the carts stick together.

Worked example

Is this collision elastic?

  • Complex familiar
  • Technology active

A 2.0 kg trolley moving at 4.0 m s−14.0\unit{m\,s^{-1}} collides with a stationary 1.0 kg trolley on a level track. Afterwards the 2.0 kg trolley continues in the same direction at 1.5 m s−11.5\unit{m\,s^{-1}}.

(a) Determine the velocity of the 1.0 kg trolley after the collision.

(b) Determine whether the collision is elastic or inelastic.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Momentum conservation for the unknown velocity.

  2. Total kinetic energy before and after.

  3. Equal means elastic; less after means inelastic; more after means stored energy was released (an explosion).

Watch out for

  • Calling it elastic because momentum was conserved. Momentum is conserved in both kinds.

Two trolleys collide on a level track. Which quantity is conserved whether the collision is elastic or inelastic?

Choose one answer

A special case. When two equal masses collide elastically head-on and one starts at rest, they swap velocities: the moving one stops and the other moves off at its speed. That is the pool shot from the last lesson, and the Newton's cradle.

A 1.0 kg cart moving at 4.0 m s−14.0\unit{m\,s^{-1}} hits a stationary 3.0 kg cart. Afterwards the 1.0 kg cart rebounds at 2.0 m s−12.0\unit{m\,s^{-1}} and the 3.0 kg cart moves forwards at 2.0 m s−12.0\unit{m\,s^{-1}}. Calculate the total kinetic energy after the collision.

in J

Give 2 significant figures.

Perfectly inelastic collisions lose as much kinetic energy as momentum conservation allows. In the trolleys that stuck together (2.0 kg at 3.0 m s−13.0\unit{m\,s^{-1}} joining 1.0 kg at rest, moving off at 2.0 m s−12.0\unit{m\,s^{-1}}), the kinetic energy fell from 9.0 J9.0\unit{J} to 6.0 J6.0\unit{J}.

Explosions run the other way. The skaters who pushed apart had zero kinetic energy before and 12(50)(3.0)2+12(75)(2.0)2=375 J\frac{1}{2}(50)(3.0)^2 + \frac{1}{2}(75)(2.0)^2 = 375\unit{J} after: chemical energy from their muscles, transformed by the push.

A 0.40 kg ball of putty moving at 5.0 m s−15.0\unit{m\,s^{-1}} hits and sticks to a stationary 0.60 kg trolley. Determine the kinetic energy transformed into other forms in the collision.

in J

Give 2 significant figures.

Note

Investigation: a linear elastic collision

Fit two trolleys with repelling magnets or spring bumpers on a level track. Measure each trolley's velocity just before and just after the collision with light gates or slow-motion video. Calculate the total momentum and total kinetic energy before and after.

Expect momentum to agree within uncertainty, and the kinetic energy after to be a few per cent lower, because of friction with the track, sound and a little heating in the bumpers. To improve the result, level the track carefully (or slightly tilt it to cancel friction), measure velocities as close to the collision as possible, and repeat trials to estimate uncertainty.

In a magnetic-bumper trolley investigation, the total kinetic energy after the collision is 4% less than before, while total momentum agrees within uncertainty. What is the most likely explanation?

Choose one answer

Worked example

Measuring a throw with a hanging block

  • Complex unfamiliar
  • Technology active

To measure how fast a student can throw, a 60 g lump of modelling clay is thrown horizontally into a 1.14 kg wooden block hanging on long strings. The clay sticks and the block swings up, rising 12 cm above its lowest point.

(a) Determine the speed of the clay just before impact.

(b) Calculate the percentage of the clay's kinetic energy that is transformed into other forms in the collision.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Split the event at the collision.

  2. Energy conservation for the swing: v=2gΔhv = \sqrt{2g\Delta h}.

  3. Momentum conservation for the collision.

  4. Compare kinetic energies before and after to measure the loss.

Watch out for

  • Setting the clay's kinetic energy equal to the potential energy at the top, which gives about 1.5 m/s instead of 31 m/s.

  • Forgetting to convert 60 g and 12 cm.

Common mistake

Energy does not survive an inelastic collision

In a two-stage problem (a collision followed by a swing, a slide or a fall), you cannot use kinetic energy conservation across the collision unless it is elastic. Use momentum across the collision and energy before or after it.

Exam tip

Discussing elastic and inelastic collisions

"Discuss the differences" needs both sides: in both types total momentum is conserved; in elastic collisions total kinetic energy is also conserved, while in inelastic collisions some is transformed into thermal energy, sound and deformation. Give an example of each and, if data are given, show the kinetic energy calculation that decides it.

Summary

  • Momentum is conserved in every collision and explosion of an isolated system.

  • Elastic: total kinetic energy conserved. Inelastic: total kinetic energy decreases. Perfectly inelastic: the objects stick together.

  • Test with ∑12mv2\sum \frac{1}{2}mv^2 before and after; kinetic energy is a scalar, so add the terms.

  • In explosions total kinetic energy increases, supplied by stored energy.

  • In two-stage problems, use momentum across the collision and energy for the motion before or after it.

Finished the lesson?

Try the 4 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 12 of 120% read

Save your progress with a free account