Lesson 1 of 8 · 16 min

What a reaction rate is and how to measure it

Define the rate of a reaction, measure it by following a gas volume, a mass or a concentration, and calculate average rates as Δ[P]Δt\frac{\Delta[\text{P}]}{\Delta t} or −Δ[R]Δt\frac{-\Delta[\text{R}]}{\Delta t} with units.

What you will be able to do

  • Define the rate of a reaction as the change in concentration of a reactant or product per unit time.
  • Calculate an average rate with rate=Δ[P]Δt\text{rate} = \frac{\Delta[\text{P}]}{\Delta t} or −Δ[R]Δt\frac{-\Delta[\text{R}]}{\Delta t}, and give the unit.
  • Choose a suitable measurement (gas volume, mass loss, colour or a precipitate) to follow a reaction.
  • Relate the rates of use and formation of different species with the coefficients in the equation.

A sparkler burns out in a minute. A piece of bread goes mouldy in a week. An iron gate rusts over years. All three are chemical reactions, but their rates are wildly different.

Chemists need to measure rates to design them: to make an industrial reaction fast enough to be worth running, to slow down food spoiling, or to stop a bridge corroding. This lesson is about what a rate is and how you put a number on it.

Definition

Rate of reaction

The rate of a reaction is how quickly a reactant is used up or a product is formed: the change in its concentration per unit time.

rate=Δ[P]Δtorrate=−Δ[R]Δt\text{rate} = \frac{\Delta[\text{P}]}{\Delta t} \qquad \text{or} \qquad \text{rate} = \frac{-\Delta[\text{R}]}{\Delta t}

Square brackets mean concentration in mol L−1\text{mol L}^{-1}, so the unit is mol L−1 s−1\text{mol L}^{-1}\,\text{s}^{-1} (or mol L−1 min−1\text{mol L}^{-1}\,\text{min}^{-1}). The data book writes volumes in dm3\text{dm}^3, and 1 dm3=1 L1\,\text{dm}^3 = 1\,\text{L}, so mol dm−3 s−1\text{mol dm}^{-3}\,\text{s}^{-1} is the same unit. This formula is in the formula and data book.

Why the minus sign? A reactant's concentration falls, so Δ[R]=[R]final−[R]initial\Delta[\text{R}] = [\text{R}]_{\text{final}} - [\text{R}]_{\text{initial}} is negative. Putting a minus in front makes the rate positive. A rate is always reported as a positive number; the words "rate of use" or "rate of formation" say which way the concentration is going.

You don't always measure a concentration directly. Anything that changes steadily as the reaction goes can be followed, and the rate is then that quantity's change per unit time:

Ways to follow a reaction, and the units of the rate you get.
What you measureSuits reactions thatExampleRate unit
Volume of gas produced (gas syringe or an upturned measuring cylinder)give off a gasMg(s)+2 HCl(aq)→MgClX2(aq)+HX2(g)\ce{Mg(s) + 2HCl(aq) -> MgCl2(aq) + H2(g)}mL s−1\text{mL s}^{-1}
Loss of mass (open flask on a balance)give off a dense gas that escapesCaCOX3(s)+2 HCl(aq)→CaClX2(aq)+HX2O(l)+COX2(g)\ce{CaCO3(s) + 2HCl(aq) -> CaCl2(aq) + H2O(l) + CO2(g)}g s−1\text{g s}^{-1} or g min−1\text{g min}^{-1}
Colour intensity (colorimeter)involve a coloured reactant or productDecolourising purple MnOX4X−\ce{MnO4-}mol L−1 s−1\text{mol L}^{-1}\,\text{s}^{-1} (after calibration)
Time for a precipitate to hide a markform a precipitateNaX2SX2OX3(aq)+2 HCl(aq)→2 NaCl(aq)+S(s)+SOX2(g)+HX2O(l)\ce{Na2S2O3(aq) + 2HCl(aq) -> 2NaCl(aq) + S(s) + SO2(g) + H2O(l)}1t\frac{1}{t} in s−1\text{s}^{-1} (a relative rate)
Concentration by titrating samplesuse up or make an acid or baseEster hydrolysis making ethanoic acidmol L−1 s−1\text{mol L}^{-1}\,\text{s}^{-1}

Following CaCOX3+2 HCl\ce{CaCO3 + 2HCl} with a gas syringe. Read the volume of COX2\ce{CO2} at regular times.

Here is what one group recorded with that set-up, using excess marble chips in hydrochloric acid.

Volume of COX2\ce{CO2} collected from excess marble chips in hydrochloric acid.
Time (s)Volume of COX2\ce{CO2} (mL)
00
3036
6056
9067
12073
15076
18078
21078

Use the table to calculate the average rate of production of COX2\ce{CO2} over the first 60 s, in mL s−1\text{mL s}^{-1} to two significant figures.

in mL s -1

Give 2 significant figures.

Work out the average rate over each 30 s interval and a pattern appears: 1.2, then 0.67, then 0.37 mL s−1\text{mL s}^{-1}, and so on down to zero once the volume stops changing. Rates fall as a reaction goes, because the reactants are being used up. You will see why in the next lesson, and read rates straight from graphs in a later one.

Worked example

Average rate from two concentration readings

  • Simple familiar
  • Technology active

Hydrogen peroxide decomposes: 2 HX2OX2(aq)→2 HX2O(l)+OX2(g)\ce{2H2O2(aq) -> 2H2O(l) + O2(g)}. In 250 mL250\unit{mL} of solution, the concentration of HX2OX2\ce{H2O2} falls from 0.800 mol L−10.800\unit{mol\,L^{-1}} to 0.560 mol L−10.560\unit{mol\,L^{-1}} in the first 120 s.

(a) Calculate the average rate of use of HX2OX2\ce{H2O2} over this time.

(b) Calculate the average rate of production of oxygen, in mol s−1\text{mol s}^{-1}.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Rate of use =−Δ[R]Δt= \dfrac{-\Delta[\text{R}]}{\Delta t}; rate of formation =Δ[P]Δt= \dfrac{\Delta[\text{P}]}{\Delta t}.

  2. Multiply by the volume in litres to get mol s−1\text{mol s}^{-1}.

  3. Use the coefficients to convert between species.

Watch out for

  • Giving the rate as −2.00×10−3-2.00 \times 10^{-3}. Rates are positive.

  • Forgetting the 2 : 1 ratio and giving the oxygen rate as 5.00×10−4 mol s−15.00 \times 10^{-4}\unit{mol\,s^{-1}}.

Key idea

Rates of different species are linked by the equation

In 2 NX2OX5(g)→4 NOX2(g)+OX2(g)\ce{2N2O5(g) -> 4NO2(g) + O2(g)}, every 2 mol of NX2OX5\ce{N2O5} used makes 4 mol of NOX2\ce{NO2} and 1 mol of OX2\ce{O2}. So at any moment

rate of formation of NOX2=2×rate of use of NX2OX5=4×rate of formation of OX2\text{rate of formation of } \ce{NO2} = 2 \times \text{rate of use of } \ce{N2O5} = 4 \times \text{rate of formation of } \ce{O2}

When you quote a rate, say which substance it is for.

In 2 NX2OX5(g)→4 NOX2(g)+OX2(g)\ce{2N2O5(g) -> 4NO2(g) + O2(g)}, the concentration of NX2OX5\ce{N2O5} falls from 0.02000.0200 to 0.0140 mol L−10.0140\unit{mol\,L^{-1}} in 100 s. Calculate the average rate of formation of NOX2\ce{NO2} over this time, to three significant figures.

in mol L -1 s -1

Give 3 significant figures.

Worked example

From millilitres of gas per second to a concentration rate

  • Complex familiar
  • Technology active

Excess marble chips are added to 50.0 mL50.0\unit{mL} of 2.00 mol L−12.00\unit{mol\,L^{-1}} hydrochloric acid:

CaCOX3(s)+2 HCl(aq)→CaClX2(aq)+HX2O(l)+COX2(g)\ce{CaCO3(s) + 2HCl(aq) -> CaCl2(aq) + H2O(l) + CO2(g)}

In the first 60 s, 45.4 mL45.4\unit{mL} of carbon dioxide is collected (volume measured at STP). Calculate the average rate over the first 60 s

(a) of production of COX2\ce{CO2} in mL s−1\text{mL s}^{-1},

(b) of production of COX2\ce{CO2} in mol s−1\text{mol s}^{-1}, and

(c) of use of HCl\ce{HCl} in mol L−1 s−1\text{mol L}^{-1}\,\text{s}^{-1}, assuming the volume of the solution does not change.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Volume of gas → moles with n=V22.7n = \dfrac{V}{22.7} (V in litres, at STP).

  2. Mole ratio from the equation → moles of the other species.

  3. Δc=ΔnV\Delta c = \dfrac{\Delta n}{V}, then divide by the time.

Watch out for

  • Using 45.445.4 instead of 0.0454 L0.0454\unit{L} in n=V22.7n = \dfrac{V}{22.7}.

  • Forgetting that 2 mol of HCl are used for every 1 mol of COX2\ce{CO2}.

Common mistake

A rate is never negative

If you subtract the start from the end for a reactant you get a negative change, such as 0.560−0.800=−0.240 mol L−10.560 - 0.800 = -0.240\unit{mol\,L^{-1}}. The rate of use is −(−0.240)Δt\dfrac{-(-0.240)}{\Delta t}, a positive number. Write "the rate of use of HX2OX2\ce{H2O2} is 2.00×10−3 mol L−1 s−12.00 \times 10^{-3}\unit{mol\,L^{-1}\,s^{-1}}", not "the rate is −2.00×10−3-2.00 \times 10^{-3}".

Which is the most suitable way to follow the rate of Zn(s)+HX2SOX4(aq)→ZnSOX4(aq)+HX2(g)\ce{Zn(s) + H2SO4(aq) -> ZnSO4(aq) + H2(g)}?

Choose one answer

Exam tip

Show the formula, the substitution and the unit

In a rate calculation, markers look for the formula, the values substituted with the change written as final − initial, and an answer with a unit that matches what was measured. "0.93" alone is incomplete; "0.93 mL s−10.93\unit{mL\,s^{-1}} of COX2\ce{CO2}" is complete.

Summary

  • Rate of reaction is the change in concentration of a product or reactant per unit time: Δ[P]Δt\frac{\Delta[\text{P}]}{\Delta t} or −Δ[R]Δt\frac{-\Delta[\text{R}]}{\Delta t}, in mol L−1 s−1\text{mol L}^{-1}\,\text{s}^{-1}.

  • The minus sign for reactants makes the rate positive.

  • Rates can also be measured as gas volume or mass per unit time (mL s−1\text{mL s}^{-1}, g s−1\text{g s}^{-1}), or as 1t\frac{1}{t} for a fixed amount of change.

  • Pick a measurement that suits the reaction: a gas syringe for any gas, mass loss for a dense gas, a colorimeter for a colour change, a disappearing cross for a precipitate.

  • The coefficients in the balanced equation link the rates of use and formation of different species.

  • Rates fall as a reaction proceeds, because the reactants are being used up.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 1 of 80% read

Save your progress with a free account