Lesson 3 of 8 · 18 min
Concentration, pressure, surface area, temperature and catalysts
Use collision theory to explain how concentration, gas pressure, surface area, temperature and a catalyst change the rate of a reaction.
What you will be able to do
- Explain how increasing concentration, or the pressure of a gas, increases the frequency of successful collisions.
- Explain how increasing the surface area of a solid increases the rate, and calculate surface areas of divided solids.
- Explain both effects of a higher temperature, and say which one matters more.
- Explain in outline how a catalyst increases the rate.
Bakers keep flour in sealed bins, because a cloud of flour dust near a flame can explode, yet a bag of flour barely burns. Food lasts longer in the fridge. A wound cleaned with hydrogen peroxide fizzes because of an enzyme in blood. Each of these is a factor that changes the rate of a reaction.
In the last lesson you saw that the rate depends on how often particles collide and what fraction of those collisions succeed. This lesson takes the five factors in the syllabus one at a time and asks: which of the two does it change?
Key idea
Concentration
Increasing the concentration of a reactant in solution puts more particles in each litre. The particles collide more frequently, so there are more successful collisions per second and the rate increases.
The particles have the same energies as before, so the fraction of collisions with at least does not change. Only the number of collisions per second does.
Key idea
Pressure (reactions of gases)
Increasing the pressure of a gas, for example by squeezing it into a smaller volume, packs more gas particles into each litre. That is the same as increasing their concentration: collisions become more frequent, so successful collisions become more frequent and the rate increases.
Pressure only matters for reactants that are gases. Pressure has almost no effect on the concentration of a solid or a solution.
Magnesium reacts faster with hydrochloric acid than with acid at the same temperature. Which is the best explanation?
Key idea
Surface area
When one reactant is a solid, only the particles on its surface can be hit by the other reactant. Breaking the solid into smaller pieces, or grinding it to a powder, exposes particles that were buried inside. More particles are available to collide, so collisions are more frequent and the rate increases.
Splitting a lump into pieces exposes particles that were inside it. Real chips contain billions of particles, but the idea is the same.
Worked example
How much surface does cutting a solid create?
A cube of marble (calcium carbonate) has sides of 2.0 cm.
(a) Calculate its surface area.
(b) It is cut into cubes with sides of 1.0 cm. Calculate the total surface area.
(c) It is instead crushed into cubes with sides of 1.0 mm. Calculate the total surface area, and explain what this means for the rate of its reaction with hydrochloric acid.
Step 1: Surface area of the single cube
Step 2: Count the 1.0 cm cubes
Each edge holds 2 small cubes, so there are cubes.
Step 3: Total area of the 1.0 cm cubes
: double the original.
Step 4: Count the 1.0 mm cubes
, so each edge holds 20 cubes and there are cubes.
Step 5: Total area of the 1.0 mm cubes
Each has , so the total is : 20 times the original.
Dividing every edge by multiplies the total surface area by , while the mass stays the same.
Step 6: Link to rate
With 20 times as much surface, 20 times as many calcium carbonate particles are exposed to the acid at any moment, so collisions with acid particles, and successful collisions, are far more frequent. The initial rate is much greater.
Try it yourself first, then check the working one step at a time.
Answer
(a) (b) (c) , 20 times the original surface, so many more particles are exposed to collisions with the acid and the rate is much faster.
Method
Surface area of a cube .
Number of small cubes .
Total area = number × area of one; compare with the original.
Watch out for
Mixing cm and mm in the same calculation.
Thinking the amount of marble changes. The mass is the same; only the exposed surface changes.
A cube of calcium carbonate with sides of 3 cm is cut into cubes with sides of 1 cm. By what factor does the total surface area increase?
Key idea
Temperature has two effects
Heating a reaction mixture gives the particles more kinetic energy, so:
- they move faster and collide more frequently, and
- a much greater fraction of collisions have at least .
Both increase the frequency of successful collisions. The second effect is far bigger. For a reaction with , warming from 25 °C to 35 °C increases the collision frequency by only about 2 %, but almost doubles the fraction of collisions with enough energy. That is why many reactions near room temperature roughly double in rate for a 10 °C rise.
Temperature does not change . It changes the particles, not the barrier.
Key idea
Catalysts
A catalyst provides an alternative reaction pathway with a lower activation energy. At the same temperature, a greater fraction of collisions now have at least the (lower) , so successful collisions are more frequent and the rate increases. The catalyst is not used up overall. Lessons 4 to 6 show this on diagrams.
Try each factor and decide whether it changes how often particles collide, the fraction that succeed, or both.
| Change | Collision frequency | Fraction of collisions with | Rate |
|---|---|---|---|
| Higher concentration | Increases | No change | Increases |
| Higher pressure (gases) | Increases | No change | Increases |
| Larger surface area (solid) | Increases | No change | Increases |
| Higher temperature | Increases slightly | Increases greatly | Increases |
| Add a catalyst | No change | Increases (lower ) | Increases |
Worked example
Explaining the effect of temperature with collision theory
A strip of magnesium reacts with hydrochloric acid much faster at 40 °C than at 20 °C. Use collision theory to explain why.
Step 1: Say what heating does to the particles
At 40 °C the acid particles have a higher average kinetic energy, so they move faster.
Step 2: First effect — more frequent collisions
Faster particles hit the magnesium surface more often, so the collision frequency increases (slightly).
Step 3: Second effect — more collisions with enough energy
Far more importantly, a much greater fraction of the particles, and so of the collisions, now have energy at least equal to the activation energy. On a Maxwell–Boltzmann distribution, the area beyond is much larger at 40 °C.
The activation energy itself is unchanged. The particles have changed, not the barrier.
Step 4: Link to the rate
Both effects increase the frequency of successful collisions, so the rate increases. The larger fraction of collisions with at least is the main reason.
Try it yourself first, then check the working one step at a time.
Answer
At 40 °C the particles have more kinetic energy, so they collide slightly more often and, much more importantly, a greater fraction of collisions have at least . Successful collisions are more frequent, so the rate is faster.
Method
Particles: more kinetic energy.
Collision frequency: increases slightly.
Fraction with : increases greatly (the main effect).
Result: more successful collisions per second, faster rate.
Watch out for
Writing only "the particles collide more often". That misses the main effect.
Writing "the activation energy decreases". Temperature does not change .
Which changes increase the rate only by increasing how often the reactant particles collide, without changing the fraction of collisions that have at least ? Select all that apply.
Common mistake
Don't give concentration an energy effect
"The particles have more energy so they react faster" is only true for temperature. For concentration, pressure and surface area, write about more frequent collisions, and say the fraction of successful collisions is unchanged. And for temperature, don't stop at "more collisions": the larger fraction of collisions with at least is the main reason.
Exam tip
Answer the whole chain
A full-marks explanation names the factor, says what happens to the particles, links it to collision frequency or the fraction with , and ends with more successful collisions per unit time, so a faster rate. For "predict" questions, state the direction first ("the rate increases"), then explain.
Summary
Concentration and gas pressure: more particles per litre → more frequent collisions → more frequent successful collisions → faster rate.
Surface area: smaller pieces expose more particles of the solid → more frequent collisions → faster rate.
Temperature: particles collide more often and a far greater fraction have at least ; the second effect dominates. does not change.
Catalyst: an alternative pathway with lower → a greater fraction of collisions succeed → faster rate.
Collision theory lets you predict the effect of a change on any reaction, from dust explosions to food spoiling.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.