Lesson 4 of 8 · 17 min

Maxwell–Boltzmann distributions

Sketch and interpret the spread of particle kinetic energies at one temperature, at a higher temperature and with a catalyst, and use the area beyond EaE_a to explain rates.

What you will be able to do

  • Describe the shape of a Maxwell–Boltzmann distribution and what its area represents.
  • Sketch the distribution at a higher temperature and explain the change in rate using the area beyond EaE_a.
  • Show the effect of a catalyst on the distribution: the curve is unchanged, the EaE_a line moves left.

Temperature tells you the average kinetic energy of the particles, but no particle is exactly average. At any instant, collisions are speeding some particles up and slowing others down. A few are almost still; a few are moving very fast.

Collision theory says only collisions with at least EaE_a succeed. So the question that matters for rate is not "what is the average energy?" but "how many particles have at least EaE_a?" A Maxwell–Boltzmann distribution answers it.

Definition

Maxwell–Boltzmann distribution

A Maxwell–Boltzmann distribution is a graph of the number of particles with each kinetic energy, for a sample at one temperature.

  • The curve starts at the origin: no particles have zero kinetic energy.
  • It rises to a peak at the most probable energy, the energy the greatest number of particles have.
  • It falls with a long tail to the right that gets closer and closer to the energy axis but never touches it: a few particles always have very high energies.
  • The area under the curve is the total number of particles.
  • The area to the right of EaE_a is the number of particles with at least the activation energy, the ones that can react if they collide in the correct orientation.

Particles at one temperature. Only those in the shaded tail, beyond EaE_a, have enough energy to react. In this sketch that is about 5 % of them.

On a Maxwell–Boltzmann distribution, what does the area under the curve to the right of the activation energy represent?

Choose one answer

At a higher temperature the average kinetic energy is higher, so the whole distribution shifts towards higher energies. But the number of particles has not changed, so the area under the curve stays the same. To keep the same area while spreading out to the right, the curve must get lower and broader.

The same particles at T1T_1 and at a higher temperature T2T_2. Beyond EaE_a, the area under the T2T_2 curve is about three times the area under the T1T_1 curve, so about three times as many collisions can succeed.

Sketching distributions at two temperatures

  1. Label the axes

    "Number of particles" on the vertical axis, "kinetic energy" on the horizontal axis. No numbers are needed.

  2. Draw the T1T_1 curve

    Start at the origin, rise to a peak, then fall with a long tail that never touches the energy axis.

  3. Mark EaE_a well to the right of the peak

    Most particles have less than EaE_a, so the line belongs in the tail. Shade the area beyond it.

  4. Draw the T2T_2 curve (higher temperature)

    Start at the origin; make the peak lower and further right; keep it above the T1T_1 curve in the tail. It should look as if it encloses about the same area.

  5. Label and explain

    Label T1T_1, T2T_2 (T2>T1T_2 > T_1) and EaE_a, and point out the larger area beyond EaE_a for T2T_2.

Interactive

Heat the sample

Watch the peak, the tail and the shaded fraction as T2T_2 changes. Then try a larger EaE_a: the fraction beyond it changes even more steeply with temperature.

Worked example

Maxwell–Boltzmann curves at two temperatures

  • Simple familiar
  • Technology free

A sample of nitrogen dioxide gas is at T1T_1 = 300 K. Sketch its Maxwell–Boltzmann distribution, then add the distribution for the same sample at T2T_2 = 350 K. Mark the activation energy for its decomposition and use your sketch to explain why the reaction is faster at 350 K.

A completed sketch (not to scale: the change is exaggerated so it is easy to see). Labels needed: both axes, T1T_1 and T2T_2, and EaE_a.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Same area under both curves.

  2. Higher temperature: peak lower and further right; tail higher.

  3. Compare the areas beyond EaE_a; link to the frequency of successful collisions.

Watch out for

  • Drawing the 350 K peak taller.

  • Moving the EaE_a line. Temperature does not change EaE_a.

A sample of gas is heated from T1T_1 to a higher temperature T2T_2. How does its Maxwell–Boltzmann curve change?

Choose one answer

Common mistake

The hotter peak is lower, not higher

Drawing the higher-temperature curve with a taller peak is the most common error on these sketches. A taller and wider curve would hold more particles than you started with. Remember: same area, so lower and wider.

With a catalyst, the temperature is unchanged, so the particles have exactly the same energies and the curve does not change at all. What changes is the barrier: the catalysed pathway has a lower activation energy, so its EaE_a line sits further to the left, and a much larger area of the curve lies beyond it.

One temperature, two pathways. About 5 % of the particles have at least EaE_a without the catalyst, and about 26 % have at least the catalysed EaE_a.

Which statement describes how adding a catalyst affects a Maxwell–Boltzmann distribution sketch at constant temperature?

Choose one answer

Raising the temperature

  • The curve changes: lower, wider, peak further right.
  • EaE_a is unchanged.
  • More area beyond EaE_a because particles have more energy.
  • Collisions also become a little more frequent.

Adding a catalyst

  • The curve is unchanged.
  • EaE_a is lower: the line moves left.
  • More area beyond EaE_a because the barrier is lower.
  • Collision frequency is unchanged.

Exam tip

What markers look for on these sketches

Both axes labelled; curves starting at the origin; the higher-temperature peak lower and to the right; the tails not touching the axis and the T2T_2 tail above the T1T_1 tail; EaE_a marked in the tail; and the relevant area shaded or described. If you add a catalyst, draw one curve and two EaE_a lines, each labelled.

Summary

  • A Maxwell–Boltzmann distribution shows how many particles have each kinetic energy at one temperature; the area under it is the number of particles.

  • The area beyond EaE_a is the number of particles that can react on collision.

  • At a higher temperature the peak is lower and further right, the area is the same, and the area beyond EaE_a is much larger.

  • A catalyst leaves the curve unchanged and moves the EaE_a line to the left, so more particles have at least the activation energy.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 4 of 80% read

Save your progress with a free account