Lesson 5 of 8 · 18 min

Energy profile diagrams and activation energy

Sketch energy profile diagrams for exothermic and endothermic reactions, read EaE_a and ΔH\Delta H from them, and link the bonds to be broken to the size of EaE_a.

What you will be able to do

  • Sketch an energy profile diagram for an exothermic or endothermic reaction, labelling the transition state, EaE_a and ΔH\Delta H.
  • Read EaE_a and ΔH\Delta H from an energy profile diagram.
  • Explain how the strength and number of bonds to be broken affect EaE_a and so the rate.

In Unit 1 you drew enthalpy level diagrams: two horizontal levels, reactants and products, and a ΔH\Delta H arrow between them. They tell you how much energy is released or absorbed. They don't tell you how fast, because they skip the journey between the two levels.

An energy profile diagram adds that journey. Before reactants can become products, bonds must stretch and start to break, so the energy rises to a peak, the transition state, and then falls as new bonds form. The height of that hump is the activation energy.

An exothermic reaction: Ea=400−250=150 kJ mol−1E_a = 400 - 250 = 150\unit{kJ\,mol^{-1}} and ΔH=150−250=−100 kJ mol−1\Delta H = 150 - 250 = -100\unit{kJ\,mol^{-1}}.

Key idea

Reading an energy profile

  • Activation energy: from the reactant level up to the peak. Ea=Htransition state−HreactantsE_a = H_{\text{transition state}} - H_{\text{reactants}}, always positive.
  • Enthalpy change: from the reactant level to the product level. ΔH=Hproducts−Hreactants\Delta H = H_{\text{products}} - H_{\text{reactants}}: negative if the products are lower (exothermic), positive if they are higher (endothermic).
  • The transition state (activated complex) at the peak is the highest-energy arrangement of atoms, with old bonds partly broken and new bonds partly formed. It cannot be isolated.

Use the energy profile above. State the enthalpy change, ΔH\Delta H, for the reaction.

in kJ mol -1

An endothermic reaction. The products are higher than the reactants, so ΔH\Delta H is positive.

Use the endothermic energy profile above. Determine the activation energy of the reaction.

in kJ mol -1
Interactive

Build an energy profile

Drag EaE_a and ΔH\Delta H. Notice that changing one does not change the other: how fast and how exothermic are separate questions.

Sketching an energy profile

  1. Label the axes

    "Enthalpy" or "energy" (with kJ mol−1\text{kJ mol}^{-1} if values are given) on the vertical axis, "reaction progress" on the horizontal axis.

  2. Draw the reactant and product levels

    Products lower for an exothermic reaction, higher for an endothermic one. Label them, with formulas if you know them.

  3. Join them with a smooth hump

    The peak (transition state) must be above both levels.

  4. Add the EaE_a arrow

    Vertical, from the reactant level up to the height of the peak.

  5. Add the ΔH\Delta H arrow

    Vertical, from the reactant level to the product level, pointing down if exothermic and up if endothermic. Write the value with its sign if you know it.

Worked example

Sketch an endothermic energy profile with a catalyst

  • Simple familiar
  • Technology free

A reaction has ΔH=+60 kJ mol−1\Delta H = +60\unit{kJ\,mol^{-1}} and an activation energy of 150 kJ mol−1150\unit{kJ\,mol^{-1}}. With a catalyst its activation energy is 90 kJ mol−190\unit{kJ\,mol^{-1}}. Sketch an energy profile diagram for the reaction with and without the catalyst, labelling EaE_a, the catalysed EaE_a and ΔH\Delta H. Take the reactants to be at 50 kJ mol−150\unit{kJ\,mol^{-1}} on the vertical axis.

The completed sketch.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Products = reactants + ΔH\Delta H.

  2. Peak = reactants + EaE_a (for each path).

  3. Catalysed path: same ends, lower peak.

Watch out for

  • Measuring EaE_a from zero, putting the peak at 150 instead of 200.

  • Drawing the catalysed path ending at a different product level.

Worked example

Reading activation energies and ΔH from a profile

  • Complex familiar
  • Technology free

The energy profile shows a reaction with and without a catalyst.

(a) Determine the activation energy without the catalyst and with it.

(b) Determine ΔH\Delta H and state whether the reaction is exothermic or endothermic.

(c) Determine the activation energy of the reverse reaction without the catalyst.

Energy profile with (dashed) and without (solid) a catalyst.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Read every level first and write them down.

  2. EaE_a = peak − start; ΔH\Delta H = end − start.

  3. For the reverse reaction, start from the products.

Watch out for

  • Reading the peak height (230) as the activation energy.

  • Writing ΔH=+60\Delta H = +60. The products are lower, so it is negative.

Key idea

Bonds, activation energy and rate

To reach the transition state, colliding particles must stretch and start to break bonds in the reactants. As a rule:

the stronger the bonds, and the more of them, that must be broken or weakened, the higher the activation energy.

A higher EaE_a means a smaller fraction of collisions have enough energy, so at a given temperature the reaction is slower. Reactions between oppositely charged ions in solution need no covalent bonds broken at all, so their EaE_a is tiny and they are almost instantaneous.

Bond enthalpies from the formula and data book, and how fast each reaction is at room temperature.
ReactionBonds that must breakRate at room temperature
AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}None: oppositely charged ions attractInstantaneous (a precipitate forms as the solutions mix)
HX+(aq)+OHX−(aq)→HX2O(l)\ce{H+(aq) + OH-(aq) -> H2O(l)}NoneInstantaneous
CHX4(g)+2 OX2(g)→COX2(g)+2 HX2O(g)\ce{CH4(g) + 2O2(g) -> CO2(g) + 2H2O(g)}C−H\ce{C-H} (414) and O=O\ce{O=O} (498)No reaction until a spark or flame supplies EaE_a; then fast
NX2(g)+3 HX2(g)→2 NHX3(g)\ce{N2(g) + 3H2(g) -> 2NH3(g)}N≡N\ce{N#N} (945) and H−H\ce{H-H} (436)Immeasurably slow; even at 450 °C it needs an iron catalyst

Worked example

Why some reactions are instant and others barely happen

  • Complex familiar
  • Technology free

When silver nitrate solution is added to sodium chloride solution, a white precipitate forms instantly: AgX+(aq)+ClX−(aq)→AgCl(s)\ce{Ag+(aq) + Cl-(aq) -> AgCl(s)}. A mixture of nitrogen and hydrogen, NX2(g)+3 HX2(g)→2 NHX3(g)\ce{N2(g) + 3H2(g) -> 2NH3(g)}, shows no measurable reaction at room temperature, even though the reaction is exothermic. Explain the difference in terms of bonds, activation energy and collisions. Use the data book's bond enthalpies.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. List the bonds that must break, with their bond enthalpies.

  2. More and stronger bonds → higher EaE_a.

  3. Higher EaE_a → smaller fraction of successful collisions → slower.

Watch out for

  • Saying the ammonia reaction is slow because it is exothermic.

  • Treating EaE_a as the total bond enthalpy of the reactants; it is related to it, but much smaller, because new bonds start forming as old ones break.

Based on the bonds that must be broken, which reaction would you expect to have the highest activation energy?

Choose one answer

Common mistake

Measure EaE_a and ΔH\Delta H from the reactants

Both arrows start at the reactant level. Reading EaE_a from zero, or from the products, gives the wrong value. And EaE_a and ΔH\Delta H are independent: a very exothermic reaction can still be slow (methane and air), and an endothermic one can be fast.

Looking ahead to Unit 3 — the reverse reaction

Read an energy profile from right to left and you have the reverse reaction. Its activation energy is measured from the products up to the peak:

Ea(reverse)=Ea(forward)−ΔHE_{a(\text{reverse})} = E_{a(\text{forward})} - \Delta H

For the exothermic profile at the top of this lesson, Ea(reverse)=150−(−100)=250 kJ mol−1E_{a(\text{reverse})} = 150 - (-100) = 250\unit{kJ\,mol^{-1}}. For an exothermic reaction the reverse barrier is always higher than the forward one, which is why some reactions are hard to reverse. You will use this to explain equilibrium in Unit 3.

Exam tip

Analyse means calculate and say what it shows

"Analyse the energy profile" usually wants values (with signs and units) and an interpretation: whether the reaction is exothermic or endothermic, and what the size of EaE_a suggests about the rate at room temperature.

Summary

  • An energy profile plots enthalpy against reaction progress, showing reactants, the transition state and products.

  • EaE_a is the height of the peak above the reactants; ΔH\Delta H is the products minus the reactants.

  • The transition state is above both reactants and products, whichever way ΔH\Delta H goes.

  • More and stronger bonds to break generally mean a higher EaE_a, a smaller fraction of successful collisions and a slower rate.

  • EaE_a (how fast) and ΔH\Delta H (how much energy) are independent.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 80% read

Save your progress with a free account