Physics · Unit 4 · Topic 2

Quantum theory

Light as a wave and as a stream of photons, black-body radiation, the photoelectric effect, the Bohr atom and line spectra, and matter waves, solved with the QCAA data-book equations.

  • 10 lessons
  • 2 h 49 min of lessons
  • 19 worked examples
  • 16 hours in the syllabus

Lessons

10
  1. Light as a wave: the double slit and electromagnetic waves (up next)

    Explain how Young’s double slit experiment provides evidence for the wave model of light, and describe light as an electromagnetic wave.

  2. Black-body radiation and Planck's quantum

    Describe black-body radiation curves, use Wien's law λmax⁡=bT\lambda_{\max} = \dfrac{b}{T}, and explain how Planck's quantum hypothesis solved the ultraviolet catastrophe.

  3. Photons: light in packets

    Calculate the energy of a photon from its frequency or wavelength, convert between joules and electron volts, count photons per second and find photon momentum.

  4. The photoelectric effect

    Describe the photoelectric effect in terms of photons, explain why the wave model fails, and use threshold frequency, work function and Ek=hf−WE_k = hf - W.

  5. Stopping voltage and photoelectric data

    Measure photoelectron energy with a stopping voltage, interpret current–voltage and Ek–f graphs, and find Planck's constant, the threshold frequency and the work function from data.

  6. From Rutherford's atom to Bohr's atom

    Trace the model of the atom from Thomson to Rutherford to Bohr, explain the evidence and the problems that drove each change, and compare the Rutherford and Bohr models.

  7. Energy levels, transitions and line spectra

    Use Bohr's energy levels to explain emission and absorption line spectra, and calculate the energy and wavelength of the photon for any transition on an energy level diagram.

  8. The hydrogen spectrum and the Rydberg equation

    Use the Rydberg equation to calculate the wavelengths of hydrogen's spectral lines, identify the Lyman, Balmer and Paschen series, and find series limits.

  9. Matter waves and the Bohr orbits

    Calculate the de Broglie wavelength of a moving particle, describe the evidence for electron waves, and use nλ=2πrn\lambda = 2\pi r and mvr=nh2πmvr = \dfrac{nh}{2\pi} to explain and solve problems about Bohr's orbits.

  10. Wave–particle duality of light

    Identify the evidence that supports the wave model of light and the evidence that supports the particle model, and explain why physicists need both.

  11. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

By 1900 physics looked almost finished. Newton's mechanics described motion, and Maxwell had shown that light is an electromagnetic wave. A few stubborn observations refused to fit: the colours of glowing hot objects, electrons knocked out of metals by light, and the sharp coloured lines in the light from hydrogen.

Explaining them took a new idea: energy comes in packets, or quanta. In this topic you follow that revolution from Young's double slit through Planck, Einstein, Rutherford, Bohr and de Broglie. You'll learn to explain each piece of evidence the way QCAA asks, and to solve problems with λmax⁡=bT\lambda_{\max} = \dfrac{b}{T}, E=hf=hcλE = hf = \dfrac{hc}{\lambda}, Ek=hf−WE_k = hf - W, the Rydberg equation and λ=hp\lambda = \dfrac{h}{p}.

Before you start

Builds on Waves and Electromagnetism.

  • Waves: v=fλv = f\lambda, superposition, interference and diffraction, and the wave model of light (Unit 2).
  • Electric potential difference V=ΔUqV = \dfrac{\Delta U}{q}, and that accelerating charges produce electromagnetic waves (Unit 3).
  • Kinetic energy Ek=12mv2E_k = \frac{1}{2}mv^2 and momentum p=mvp = mv (Unit 2).
  • Scientific notation, the prefixes nano, micro and milli, and significant figures.
  • Finding the gradient and intercepts of a straight-line graph.

What QCAA says you need to know16 dot points

Quantum theory

Science as a human endeavour

Science inquiry

  • Investigate variables related to the photoelectric effect such as
    • photoelectron energy or velocity
    • electrical potential difference across the anode and cathode
    • wavelength or frequency of incident light
    • work functions of surfaces.
    LessonStopping voltage and photoelectric data

Subject matter from the Physics General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Light as a wave

    Explain the double slit interference pattern using superposition and path difference, and describe light as an electromagnetic wave.

    Practise
  • Black-body radiation and Wien’s law

    Read black-body curves, use λmax = b/T, and explain the ultraviolet catastrophe and Planck’s quantum hypothesis.

    Practise
  • Photon energy and momentum

    Use E = hf = hc/λ and p = h/λ, convert between joules and electron volts, and count photons per second.

    Practise
  • Explaining the photoelectric effect

    Describe the observations, explain why the wave model fails and the photon model succeeds, and define threshold frequency and work function.

    Practise
  • Photoelectric calculations

    Solve problems with Ek = hf − W and W = hf₀, including threshold wavelength, stopping voltage and photoelectron speed.

    Practise
  • Photoelectric data and graphs

    Interpret Ek–f, stopping voltage–frequency and current–voltage graphs, and find h, f₀ and W from experimental data.

    Practise
  • Rutherford and Bohr atoms

    Describe and compare the Thomson, Rutherford and Bohr models, the evidence for each, and why each was replaced.

    Practise
  • Energy levels and line spectra

    Use energy level diagrams to explain emission and absorption spectra and to calculate photon energies and wavelengths for transitions.

    Practise
  • The Rydberg equation

    Calculate the wavelengths of hydrogen spectral lines, identify the Lyman, Balmer and Paschen series, and find series limits.

    Practise
  • Matter waves and Bohr orbits

    Calculate de Broglie wavelengths with λ = h/p and use nλ = 2πr and mvr = nh/2π for electron orbits.

    Practise
  • Wave–particle duality

    Identify the evidence for the wave and particle models of light and explain why both are needed.

    Practise

Worked examples19

All 19

Common mistakes

Mixing joules and electron volts

E=hfE = hf gives joules when hh is in J s. Divide by 1.60×10−191.60 \times 10^{-19} to get electron volts, and multiply to go back. Never subtract a work function in eV from a photon energy in J.

Forgetting to convert nanometres to metres

1 nm=10−9 m1\unit{nm} = 10^{-9}\unit{m}. Substituting λ=500\lambda = 500 instead of 500×10−9500 \times 10^{-9} makes the answer wrong by a factor of 10910^9.

Using degrees Celsius in Wien's law

λmax⁡=bT\lambda_{\max} = \dfrac{b}{T} needs TT in kelvin: T=TC+273T = T_C + 273.

Thinking brighter light gives faster photoelectrons

Intensity sets the number of photons per second, so it sets the number of photoelectrons (the current). The maximum kinetic energy depends only on the frequency and the work function.

Forgetting that Ek in Einstein's equation is a maximum

Ek=hf−WE_k = hf - W is the kinetic energy of the fastest photoelectrons. Electrons from deeper in the metal lose energy on the way out, so most have less.

Reading the y-intercept of an Ek–f graph as +W

The line Ek=hf−WE_k = hf - W meets the vertical axis at −W-W. The work function is the size of that intercept, and the threshold frequency is the horizontal intercept.

Using a level's energy instead of the difference

An emitted photon carries the difference between two levels, ΔE=Ei−Ef\Delta E = E_i - E_f, not the energy of either level.

Forgetting the reciprocal in the Rydberg equation

The Rydberg equation gives 1λ\dfrac{1}{\lambda}. Take the reciprocal at the end, and keep nf<nin_f < n_i so the bracket is positive.

Missing lines when counting transitions

From level nn an electron can cascade through every lower level, so there are n(n−1)2\dfrac{n(n-1)}{2} possible lines, not n−1n - 1.

Using p=mvp = mv for a photon

A photon has no rest mass. Its momentum is p=hλp = \dfrac{h}{\lambda} (or Ec\dfrac{E}{c}).

Exam tips

  1. Write the data-book equation first, substitute with units, and give the answer with a unit and sensible significant figures (usually three, matching the data). Use h=6.626×10−34 J sh = 6.626 \times 10^{-34}\unit{J\,s}, c=3.00×108 m s−1c = 3.00 \times 10^{8}\unit{m\,s^{-1}} and 1 eV=1.60×10−19 J1\unit{eV} = 1.60 \times 10^{-19}\unit{J}.

  2. Decide early whether to work in joules or electron volts, and convert everything to that unit before you subtract.

  3. For photoelectric "explain" questions, cover frequency (threshold), intensity (number of electrons) and timing (no delay), and link each to one photon giving all its energy to one electron.

  4. On an EkE_k–ff graph, the gradient is hh, the horizontal intercept is f0f_0 and the vertical intercept is −W-W. On a V0V_0–ff graph the gradient is he\dfrac{h}{e}. Use two well-separated points on the line of best fit, not raw data points.

  5. To explain line spectra with Bohr's model, give the chain: fixed energy levels → transition from higher to lower level → one photon with hf=Ei−Efhf = E_i - E_f → only certain energy differences, so only certain wavelengths.

  6. "Compare" means similarities and differences. For Rutherford and Bohr, say what they share (dense positive nucleus, orbiting electrons) and how they differ (fixed non-radiating orbits, quantised energy, explains line spectra).

  7. For wave–particle duality, name a phenomenon, state what is observed, and say which model it supports and why. One well-explained piece of evidence for each model beats a list.

  8. Check reasonableness: visible photons carry about 1.8–3.1 eV, work functions are a few eV, and visible wavelengths are 400–700 nm.

Where this shows up

  • Solar cells, digital camera sensors and light meters turn photons into electric current, using the same one-photon, one-electron physics as the photoelectric effect.

  • Astronomers find the surface temperatures of stars from the peak of their black-body spectra, and their compositions from absorption lines.

  • Infrared thermometers and thermal cameras measure the black-body radiation from warm objects, which peaks near 10 μm10\unit{\mu m}.

  • Climate models start from Earth's energy balance as a black body that absorbs sunlight and emits infrared radiation.

  • Lasers, LEDs and fluorescent lights work because electrons in atoms and solids move between fixed energy levels.

  • Electron microscopes use the short de Broglie wavelength of fast electrons to resolve detail far smaller than visible light can.

  • Night-vision devices and photomultiplier tubes use the photoelectric effect to detect single photons.

Save your progress with a free account