Lesson 7 of 10 · 20 min
Energy levels, transitions and line spectra
Use Bohr's energy levels to explain emission and absorption line spectra, and calculate the energy and wavelength of the photon for any transition on an energy level diagram.
What you will be able to do
- Explain how Bohr's model combines light quanta and fixed atomic energy states to produce the specific wavelengths of the hydrogen line spectrum.
- Read an energy level diagram and calculate photon energies with and wavelengths with .
- Distinguish emission and absorption spectra.
- Find the number of possible spectral lines and the ionisation energy from an energy level diagram.
Pass a high voltage through a tube of hydrogen gas and it glows pinkish-purple. Look at that glow through a diffraction grating or prism and you don't see a rainbow. You see four sharp, separate coloured lines on a dark background, always at exactly the same wavelengths.
Every element has its own set of lines, like a barcode. Bohr's model was the first to explain why.
The visible lines of hydrogen. Nothing is emitted between the lines.
Key idea
How Bohr's model explains line spectra
- The electron in a hydrogen atom can only have certain fixed energies, its energy levels
- In a discharge tube, collisions give electrons energy and lift them to higher levels.
- An excited electron drops back to a lower level, and each drop emits one photon. The photon's energy equals the energy lost: .
- Only certain energy differences exist, so only certain frequencies, and therefore only certain wavelengths , are emitted. That gives a line spectrum.
Energy levels of hydrogen (not to scale). Every downward arrow is one photon. Transitions to give ultraviolet lines, to visible lines, and to infrared lines.
Definition
Reading an energy level diagram
- The ground state is the lowest level, . Higher levels are excited states.
- The energies are negative because zero is defined as the electron just free of the atom (). A bound electron has less energy than a free one.
- The ionisation energy is the energy needed to lift an electron from the ground state to : for hydrogen.
- For hydrogen, . This is not in the data book; questions give you the levels.
Choose a level to move the electron. Moving down emits one photon whose energy equals the gap between the levels, so bigger gaps give shorter wavelengths; moving up needs a photon of exactly that energy. Try and compare the photon with the diagram above.
Worked example
The red line of hydrogen
In a hydrogen atom, an electron drops from () to (). Calculate (a) the energy of the emitted photon in joules and (b) its wavelength, and (c) identify its colour.
Step 1: Find the energy difference
The photon carries away exactly the energy the electron loses.
Step 2: Convert to joules
Step 3: Find the wavelength
Step 4: Identify the colour
is near the long-wavelength end of the visible spectrum, so the light is red. It is the bright red line in hydrogen's spectrum, called H-alpha.
Try it yourself first, then check the working one step at a time.
Answer
(a) (b) () (c) red
Method
from the energy level diagram.
Convert electron volts to joules.
.
Watch out for
Using or on its own as the photon energy.
Using the hydrogen energy level diagram, calculate the energy, in electron volts, of the photon emitted when an electron drops from to .
Now reverse the process. Shine white light, which contains every wavelength, through a cool gas of hydrogen. An atom in the ground state can absorb a photon only if the photon's energy exactly matches a jump up to a higher level. Those wavelengths are removed from the beam, so the spectrum shows dark lines on a continuous background, at the same wavelengths as the emission lines for the same pair of levels.
Emission spectrum
Bright lines on a dark background. A hot, low-pressure gas has electrons dropping from higher to lower levels, emitting photons with .
Absorption spectrum
Dark lines on a continuous spectrum. Cooler gas in front of a hot source absorbs photons whose energy exactly matches a jump up, .
Choose an element and compare its emission and absorption spectra. The dark absorption lines sit exactly where the bright emission lines are, and each element has its own pattern. For hydrogen, step through the lines to see which transition makes each one.
Note
Absorption needs an exact match, unless it ionises
A photon is absorbed whole or not at all, so its energy must match a gap exactly. A ground-state hydrogen atom absorbs photons () but ignores photons. The exception is ionisation: any photon with at least can free the electron, and the extra energy becomes the electron's kinetic energy.
Absorption lines are how astronomers read the composition of stars. Helium was discovered in 1868 as an unexplained line in the Sun's spectrum, decades before it was found on Earth.
A sample of hydrogen atoms is excited so that electrons reach . How many different wavelengths can the sample emit as the electrons return to the ground state?
Worked example
How many lines, and which is the longest wavelength?
The lowest four energy levels of an atom are , , and . Atoms in a gas are excited to .
(a) How many different wavelengths can the gas emit as the atoms return to the ground state?
(b) Which transition gives the longest wavelength? Calculate that wavelength.
Every possible downward transition from the fourth level.
Step 1: List every possible transition
From : to , , . From : to , . From : to . That is transitions.
An electron can stop at any lower level on the way down, so every pair of levels gives a line: .
Step 2: Find the smallest energy gap
The gaps are : , : , : , : , : , : .
The smallest is : .
The longest wavelength belongs to the lowest-energy photon, since .
Step 3: Convert the energy to joules
Step 4: Calculate the wavelength
Try it yourself first, then check the working one step at a time.
Answer
(a) 6 wavelengths. (b) The transition () gives the longest wavelength, (, red).
Method
Count all pairs of levels: .
Longest wavelength = smallest gap; shortest wavelength = largest gap.
with in joules.
Watch out for
Assuming the smallest gap is always the one at the top. Check every gap.
Counting only the three jumps that start from .
Common mistake
Common slips with energy level diagrams
- Using the energy of one level instead of the difference between two levels.
- Getting the sign wrong. Take for an emitted photon, so the answer is positive.
- Forgetting to convert electron volts to joules before using with in J s.
- Thinking a big energy level value means a big photon. The photon depends only on the gap.
Exam tip
Explaining line spectra for full marks
'Explain how Bohr's model accounts for the hydrogen line spectrum' is usually worth about 4 marks, one for each link in the chain:
- The electron can only have certain fixed energies (stationary states), and doesn't radiate in them.
- An excited electron jumps from a higher level to a lower one.
- Each jump emits one photon with .
- Only certain energy differences exist, so only certain wavelengths, , are emitted.
Leaving out step 4, the link from fixed levels to specific wavelengths, is the most common way to drop a mark.
Worked example
Exciting hydrogen with photons and with electrons
Hydrogen atoms are in the ground state (). The next levels are : and : .
(a) A beam of photons, each of energy , passes through the gas. Explain whether any photons are absorbed.
(b) A beam of electrons, each with of kinetic energy, passes through the gas instead. Explain whether the electrons can excite the atoms and, if so, find the kinetic energy an electron keeps.
Step 1: List the energies needed for each jump from the ground state
: . : . Ionisation: .
Step 2: Decide for the photons
A photon is absorbed whole or not at all, so its energy must exactly match a jump. matches no gap (it is more than but less than ) and is below the ionisation energy. No photons are absorbed.
In Bohr's model the photon's entire energy goes into one jump: exactly.
Step 3: Decide for the electrons
A colliding electron can hand over part of its kinetic energy. It has more than the needed for but less than the for . So it can excite an atom to .
The electron is a particle with kinetic energy to spare. It doesn't vanish when it transfers energy, so it can keep what is left over.
Step 4: Find the energy the electron keeps
Try it yourself first, then check the working one step at a time.
Answer
(a) No. A photon must give up all its energy, and does not match any transition from the ground state ( or ) and is less than the ionisation energy. (b) Yes. An electron can transfer part of its energy, so it can lift an atom to (using ) and keeps of kinetic energy.
Method
Work out the energy needed for each jump from the starting level.
Photons: absorbed only for an exact match (or any energy above the ionisation energy).
Electrons: can excite any level whose jump is less than or equal to their kinetic energy; they keep the rest.
Watch out for
Saying the photon is absorbed to with to spare. A photon cannot be partly absorbed.
Hydrogen atoms in the ground state () are exposed to photons of the energies below. The levels are : , : , : . Select all the photons that can be absorbed.
Summary
An electron in an atom can only have certain energies, its energy levels. The ground state is the lowest; zero energy means the electron has just escaped.
When an electron drops from to it emits one photon with , so .
Only certain energy gaps exist, so only certain wavelengths are emitted. This is Bohr's explanation of the hydrogen line spectrum.
Absorption spectra have dark lines at the wavelengths of photons that exactly match an upward jump. Photons above the ionisation energy can always be absorbed.
From level there are possible lines. The smallest gap gives the longest wavelength.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.