Lesson 1 of 12 · 16 min
Energy flow through ecosystems
Explain how producers turn light into the chemical energy of biomass, what happens to the sunlight that is not captured, and why energy leaves every ecosystem as heat.
What you will be able to do
- Explain how producers convert light energy into the chemical energy of biomass by photosynthesis.
- Describe what happens to the sunlight that reaches an ecosystem, including reflection, transmission and absorption as heat.
- Calculate the percentage of incident light energy that producers fix as chemical energy.
- Explain why energy flows one way through an ecosystem and is lost as heat, while carbon in biomass cycles.
An eastern grey kangaroo grazing on a frosty morning on the Darling Downs is burning energy just to stay warm. That energy came from the grass it ate, and the grass got it from sunlight a few weeks earlier. Follow the energy in any ecosystem far enough back and it starts at the Sun.
This lesson follows that energy in: how it is captured, how it becomes the substance of living things, and how it leaves again.
Definition
The biotic components of an ecosystem
An ecosystem is a community of organisms interacting with each other and with their abiotic (non-living) environment. Its living, biotic components fall into three feeding groups:
- Producers (autotrophs) make their own organic compounds from carbon dioxide and water, using light energy. Plants, algae and cyanobacteria are producers.
- Consumers (heterotrophs) get energy and carbon by eating other organisms: herbivores eat producers, carnivores eat animals, omnivores eat both.
- Decomposers (bacteria and fungi) and detritivores (such as earthworms, slaters and dung beetles) feed on dead organic matter and wastes.
Light becomes chemical energy. In the chloroplasts of a producer, chlorophyll absorbs light. In the light-dependent reactions that light energy is used to split water and is stored briefly in ATP and NADPH. In the light-independent reactions (the Calvin cycle) the ATP and NADPH are used to fix carbon dioxide into glucose. The overall equation is the one you met in Unit 1:
with light energy as the input. The energy is now chemical potential energy in the bonds of glucose.
Glucose becomes biomass. Plants use glucose two ways. Some is respired straight away to make ATP for the plant's own work. The rest is built into cellulose for cell walls, starch for storage, and (with nitrogen and other minerals from the soil) proteins, lipids and nucleic acids. This organic matter is biomass, and the chemical energy in it is what every consumer and decomposer in the ecosystem lives on.
Biomass is also a store of carbon. Each glucose molecule holds six carbon atoms taken from the air. When the plant, an animal that eats it, or a decomposer respires that biomass, the carbon returns to the atmosphere as . So the production of biomass links energy flow directly to the carbon cycle, which you will meet in detail later in this topic.
What happens to sunlight reaching a plant. Only a small fraction ends up in new biomass; the rest is reflected, transmitted or lost as heat.
Most sunlight is never captured. The syllabus asks you to account for energy lost through reflection, absorption and radiation:
- Some light is reflected from leaf surfaces, especially green light, which is why leaves look green. Some misses the leaves altogether and lands on soil, rock or water.
- Some is transmitted straight through thin leaves.
- Much of the light a leaf absorbs is at wavelengths photosynthesis cannot use, or arrives faster than the chloroplasts can use it. That energy warms the leaf, evaporates water in transpiration, and is radiated away as heat (infrared).
Even in a healthy, well-watered ecosystem, producers usually fix less than about 2 % of the sunlight that reaches them as chemical energy. That small fraction powers almost everything else that lives there.
Watch where the sunlight goes before any of it becomes chemical energy, then follow the heat lost at every level.
Definition
Gross and net primary productivity
Gross primary productivity (GPP) is the rate at which producers fix light energy as chemical energy, per unit area per unit time, for example in .
Net primary productivity (NPP) is what is left after the producers' own respiration (): . NPP is stored in new biomass, and it is the energy available to consumers and decomposers. You will calculate both in the productivity lesson.
A sugarcane crop fixes about 1 % of the light energy that reaches it. Which statement best accounts for most of the other 99 %?
Worked example
Account for the sunlight reaching a pasture
Researchers measured the fate of the sunlight reaching an improved pasture near Gatton over one year.
| Energy | |
|---|---|
| Sunlight reaching the pasture | |
| Reflected or transmitted (not absorbed by leaves) | |
| Fixed by photosynthesis (GPP) |
(a) Calculate the percentage of the sunlight reaching the pasture that is fixed as GPP. (b) Calculate the energy that is absorbed by the leaves but not fixed, and state what happens to it. (c) Calculate the percentage of the absorbed light that is fixed, to two significant figures. (d) Explain why so little of the sunlight becomes chemical energy.
Step 1: Photosynthetic efficiency of the pasture
Efficiency compares the energy fixed with the energy available, so the GPP goes on top.
Step 2: Energy absorbed
Absorbed
Step 3: Absorbed but not fixed
. It is converted to heat: it warms the leaves, evaporates water in transpiration and is radiated to the surroundings.
Step 4: Efficiency based on absorbed light
Step 5: Explain the low efficiency
Almost half the light is reflected from leaf surfaces, transmitted through the leaves or misses them. Of the light absorbed, much is at wavelengths chlorophyll cannot use, or arrives faster than the light-dependent reactions can use it (in strong midday sun), and that energy is lost as heat. Photosynthesis may also be limited by temperature, water or carbon dioxide.
Try it yourself first, then check the working one step at a time.
Answer
(a) . (b) , lost as heat (warming leaves, evaporating water, radiated away). (c) . (d) Most light is reflected or transmitted; most absorbed light is the wrong wavelength or in excess and becomes heat; other factors limit photosynthesis.
Method
Efficiency = energy fixed ÷ energy available × 100.
Absorbed = reaching − (reflected + transmitted); absorbed but not fixed is lost as heat.
Name the losses: reflection, transmission, absorption as heat.
Watch out for
Dividing the sunlight by the GPP, giving an efficiency far above 100 %.
Saying the unfixed energy is "used up" or "stored in the soil" instead of lost as heat.
Energy leaves as heat at every step. Every organism respires. Aerobic respiration releases the chemical energy in glucose to make ATP, but the transfer is far from perfect: a large share is released as heat straight away. The ATP is then used for movement, active transport, building molecules and, in mammals and birds, keeping the body warm, and that energy too ends up as heat.
Heat cannot be turned back into chemical energy by any organism. It is radiated from the ecosystem into the atmosphere and eventually out to space. That is why an ecosystem needs a constant input of sunlight: without it, the chemical energy stored in its biomass would be respired away and the ecosystem would run down.
Key idea
Energy flows, matter cycles
Energy enters an ecosystem as light, passes from organism to organism as chemical energy in food, and leaves as heat. It flows one way and is not recycled.
Matter, the carbon, nitrogen, water and other atoms that make up biomass, is recycled. Decomposers return the atoms in dead organisms to the soil, water and air, where producers can take them up again.
Common mistake
Decomposers do not recycle energy
"Decomposers recycle energy" is a common wrong answer. Decomposers use the chemical energy in dead matter for their own respiration, and it is released as heat. What they recycle is nutrients: carbon as , nitrogen as ammonium, phosphate and other minerals.
Light energy reaching a eucalypt forest canopy is . The GPP of the forest is . Calculate the percentage of the light energy that is fixed by photosynthesis.
Select all the statements that are correct.
Exam tip
Explaining energy transformations
An "explain" answer about energy flow names each transformation and each loss: light energy → chemical energy (photosynthesis, in chloroplasts) → chemical energy in biomass → chemical energy in consumers (feeding) → heat (respiration). Say where the energy that is not passed on goes. "Energy is used up" or "energy is lost" without saying how earns no marks.
Summary
Producers convert light energy into chemical energy by photosynthesis; this energy is stored in glucose and then in biomass.
Biomass is a store of both chemical energy and carbon; respiring it returns carbon to the air as .
Most sunlight is reflected, transmitted, or absorbed and lost as heat. Producers usually fix less than about 2 % as GPP.
GPP is the rate of energy fixation; NPP = GPP − R is the energy stored in new biomass for consumers and decomposers.
Respiration in every organism releases energy that ends up as heat, which is radiated away and cannot be reused.
Energy flows one way through an ecosystem; matter cycles.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.