Specialist Mathematics · Unit 3 · Topic 3

Vectors in two and three dimensions

Take vectors into three-dimensional space, calculate with i, j and k, the scalar and vector products and projections, prove geometric results, and write vector and Cartesian equations of lines, planes and spheres.

  • 8 lessons
  • 2 h 21 min of lessons
  • 16 worked examples
  • 13 hours in the syllabus
0 of 8

Start here

Points and vectors in three dimensions

Lesson 1 of 8 · 15 min

Start the topic

Lessons

8
  1. Points and vectors in three dimensions (up next)

    Plot points on right-handed x-, y- and z-axes, write position vectors with i, j and k, and add, subtract and scale vectors in three dimensions.

  2. Magnitude, unit vectors and the altitude angle

    Find the exact length of a vector in space and the distance between two points, build unit vectors, and describe how steeply a vector climbs with the altitude angle.

  3. The scalar product in three dimensions

    Calculate a · b in Cartesian form, use it to find the angle between vectors and between lines, and decide whether two vectors are parallel or perpendicular.

  4. Projections, work and relative velocity

    Use scalar and vector projections to resolve vectors and find the shortest distance from a point to a line, then model forces, work and relative velocity in three dimensions.

  5. Dividing segments and proving with vectors

    Find the point that divides a segment in a given ratio, including the midpoint, and use vectors to prove geometric results in two and three dimensions.

  6. Vector equations of lines and curves

    Write vector, parametric and Cartesian equations of lines and line segments in two and three dimensions, decide whether lines meet, and turn a parametric curve in the plane into a Cartesian equation.

  7. The vector (cross) product

    Calculate a×b\mathbf{a} \times \mathbf{b} by hand and with technology, use the right-hand rule for its direction, and use it to find normal vectors and the areas of parallelograms and triangles.

  8. Equations of planes and spheres

    Write vector and Cartesian equations of planes and regions in a plane, find where a line meets a plane and the angles involved, and use the equation of a sphere.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

In Unit 1 you described displacements, velocities and forces in the plane. Real problems rarely stay flat: a drone climbs as it flies, a roof slopes in two directions, and a satellite dish points at a spot in the sky. This topic adds a third axis, zz, and a third unit vector, k^\hat{\mathbf{k}}, so you can describe any position or direction in space.

Almost everything you know carries straight across. Vectors still add component by component, magnitude is still Pythagoras, and the scalar product still finds angles and tests for perpendicular vectors. Then come the new tools: the altitude angle, the vector (cross) product, which builds a vector perpendicular to two others, and equations that describe whole lines, planes and spheres.

By the end you will be able to find where a line meets a plane, the area of a triangle in space, and the equation of a sphere from its centre and radius, and to prove geometric results with vectors in two and three dimensions. The next topic, Vector calculus, uses these equations to describe motion through space.

Before you start

Builds on Vectors in the plane, Algebra of vectors in two dimensions and Circle and geometric proofs.

  • Vectors in the plane: notation, the triangle rule, scalar multiples and i^\hat{\mathbf{i}}–j^\hat{\mathbf{j}} form (Unit 1).
  • The scalar product, projections and vector proofs in two dimensions (Units 1 and 2).
  • Pythagoras' theorem and right-angled trigonometry, with angles in degrees.
  • Completing the square.
  • Solving simultaneous linear equations by elimination or substitution.
  • Simplifying surds and rationalising a denominator.

What QCAA says you need to know22 dot points

Vectors in three dimensions

3 hours

Algebra of vectors in three dimensions

3 hours

Vector and Cartesian equations

7 hours
  • Understand and use equations of spheres: equation of sphere: (x−h)2+(y−k)2+(z−l)2=r2(x - h)^2 + (y - k)^2 + (z - l)^2 = r^2LessonEquations of planes and spheres
  • Use vector equations of curves in two or three dimensions involving a parameter, and determine a ‘corresponding’ Cartesian equation in the two-dimensional case.LessonVector equations of lines and curves
  • Determine vector, parametric and Cartesian equations of straight lines and straight-line segments given the position of two points, or equivalent information, in both two and three dimensions: vector equation of line: r=a+td\mathbf{r} = \mathbf{a} + t\mathbf{d}; parametric equations of line: x=a1+td1x = a_1 + t d_1, y=a2+td2y = a_2 + t d_2, z=a3+td3z = a_3 + t d_3; Cartesian equation of line: x−a1d1=y−a2d2=z−a3d3\dfrac{x - a_1}{d_1} = \dfrac{y - a_2}{d_2} = \dfrac{z - a_3}{d_3}LessonVector equations of lines and curves
  • Define and use the vector (cross) product to determine a vector normal to a given plane, with and without technology: a×b=∣a∣∣b∣sin⁡(θ) n^\mathbf{a} \times \mathbf{b} = |\mathbf{a}||\mathbf{b}|\sin(\theta)\,\hat{\mathbf{n}}; a×b=(a1a2a3)×(b1b2b3)=(a2b3−a3b2a3b1−a1b3a1b2−a2b1)\mathbf{a} \times \mathbf{b} = \begin{pmatrix} a_1 \\ a_2 \\ a_3 \end{pmatrix} \times \begin{pmatrix} b_1 \\ b_2 \\ b_3 \end{pmatrix} = \begin{pmatrix} a_2 b_3 - a_3 b_2 \\ a_3 b_1 - a_1 b_3 \\ a_1 b_2 - a_2 b_1 \end{pmatrix}LessonsThe vector (cross) productEquations of planes and spheres
  • Use vector methods in applications, including areas of shapes and determining vector and Cartesian equations of a plane and of regions in a plane: vector equation of plane: r⋅n=a⋅n\mathbf{r} \cdot \mathbf{n} = \mathbf{a} \cdot \mathbf{n}; Cartesian equation of plane: ax+by+cz+d=0ax + by + cz + d = 0LessonsThe vector (cross) productEquations of planes and spheres

Subject matter from the Specialist Mathematics General senior syllabus 2025 v1.4 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Points and position vectors in 3D

    Plot points on x-, y- and z-axes and write position vectors as ordered triples, column vectors and i–j–k combinations.

    Practise
  • Adding, subtracting and scaling in 3D

    Add, subtract and scale vectors component by component, and find the vector between two points.

    Practise
  • Magnitude and unit vectors in 3D

    Find the exact magnitude of a 3D vector and the distance between two points, and build unit vectors and vectors of a given length.

    Practise
  • The altitude angle

    Find and use the altitude angle, the angle a vector makes with the xy-plane, and convert between components and magnitude–angle form.

    Practise
  • The scalar product and angles

    Calculate a · b in Cartesian form, find angles between vectors and lines, and test vectors for being parallel or perpendicular.

    Practise
  • Scalar and vector projections

    Find the scalar and vector projections of one vector on another and use them to resolve vectors and find distances.

    Practise
  • Modelling with vectors

    Solve displacement, force, velocity and relative velocity problems in three dimensions.

    Practise
  • Sections and vector proofs

    Find points that divide a segment in a ratio, including midpoints, and prove geometric results in two and three dimensions with vectors.

    Practise
  • Equations of lines and curves

    Write vector, parametric and Cartesian equations of lines and segments, and turn a 2D vector equation of a curve into a Cartesian equation.

    Practise
  • The vector (cross) product

    Calculate a × b, use it to find a normal vector, and find areas of parallelograms and triangles.

    Practise
  • Equations of planes

    Write vector and Cartesian equations of planes and regions in a plane, and find where a line meets a plane.

    Practise
  • Equations of spheres

    Write the equation of a sphere from its centre and radius, and find the centre and radius by completing the square.

    Practise

Worked examples16

All 16

Common mistakes

Forgetting the third component

In three dimensions every vector has three components. A missing term is a zero: 3i^−k^=(30−1)3\hat{\mathbf{i}} - \hat{\mathbf{k}} = \begin{pmatrix} 3 \\ 0 \\ -1 \end{pmatrix}.

Subtracting the wrong way round

AB→=b−a\overrightarrow{AB} = \mathbf{b} - \mathbf{a}: head minus tail. a−b\mathbf{a} - \mathbf{b} is BA→\overrightarrow{BA}.

The middle component of the cross product

The j^\hat{\mathbf{j}} component of a×b\mathbf{a} \times \mathbf{b} is a3b1−a1b3a_3b_1 - a_1b_3. With the determinant method it carries a minus sign. Check your answer by dotting it with a\mathbf{a} and b\mathbf{b}: both should give 0.

Treating the cross product as commutative

b×a=−(a×b)\mathbf{b} \times \mathbf{a} = -(\mathbf{a} \times \mathbf{b}). The order matters for the direction, though not for the magnitude.

Mixing up dot and cross products

a⋅b\mathbf{a} \cdot \mathbf{b} is a number and uses cos⁡(θ)\cos(\theta); a×b\mathbf{a} \times \mathbf{b} is a vector and its magnitude uses sin⁡(θ)\sin(\theta). Perpendicular means the dot product is 0; parallel means the cross product is 0\mathbf{0}.

The altitude angle from the wrong axis

φ\varphi is measured from the xyxy-plane, so sin⁡(φ)=a3∣a∣\sin(\varphi) = \frac{a_3}{|\mathbf{a}|}. The angle with the positive zz-axis is 90∘−φ90^\circ - \varphi.

An obtuse angle between lines

Lines meet at two angles that add to 180∘180^\circ. The angle between two lines is the acute one: use ∣d1⋅d2∣|\mathbf{d}_1 \cdot \mathbf{d}_2| in the cosine formula.

The angle between a line and a plane

The angle between a direction vector and the normal is 90∘90^\circ minus the angle between the line and the plane. Use sin⁡\sin instead of cos⁡\cos, or subtract from 90∘90^\circ.

The sign of d in a plane equation

r⋅n=a⋅n\mathbf{r} \cdot \mathbf{n} = \mathbf{a} \cdot \mathbf{n} gives ax+by+cz=a⋅nax + by + cz = \mathbf{a} \cdot \mathbf{n}. Moving it across gives ax+by+cz+d=0ax + by + cz + d = 0 with d=−a⋅nd = -\mathbf{a} \cdot \mathbf{n}. Substitute the known point to check.

Signs in a sphere's centre

(x+2)2+(y−1)2+z2=9(x + 2)^2 + (y - 1)^2 + z^2 = 9 has centre (−2,1,0)(-2, 1, 0) and radius 33, not 99.

Exam tips

  1. In Paper 1 keep magnitudes, unit vectors and cosines exact: 13(2i^−j^+2k^)\frac{1}{3}(2\hat{\mathbf{i}} - \hat{\mathbf{j}} + 2\hat{\mathbf{k}}), not decimals.

  2. Check every cross product by dotting it with both original vectors. A non-zero result means an arithmetic slip, and the check takes ten seconds.

  3. By hand, mark vectors with a tilde, a∼\tvec{a}, and write AB→\overrightarrow{AB} with its arrow. A vector can never equal a number.

  4. "Show that" questions need every step: write the dot product in full, state "=0= 0, so the vectors are perpendicular", and say why.

  5. For vector proofs, define your vectors at the start ("let OA→=a\overrightarrow{OA} = \mathbf{a}…"), work in those vectors only, and finish with a sentence that answers the question.

  6. A line or plane equation is not unique. Before you worry that your answer differs from someone else's, check that their point satisfies your equation and their direction or normal is a multiple of yours.

  7. Verify a plane equation by substituting each given point. Verify a line by checking t=0t = 0 and t=1t = 1 give the two points.

  8. In Paper 2 your calculator can find dot and cross products and magnitudes. Still write the vectors you entered and the result, so the marker can follow your method.

  9. State the angle asked for: between vectors (0° to 180°), between lines (acute), or between a line and a plane (from the sine of the angle with the normal).

Where this shows up

  • Computer graphics shade every surface using the angle between its normal vector, found with a cross product, and the direction of the light.

  • Air traffic controllers track each aircraft's position and velocity in three dimensions and check how close their paths come.

  • Engineers resolve the forces in cables and beams with projections, and find the work done by a force with the scalar product.

  • Architects and surveyors describe sloping roofs and land as planes, and find their pitch from the normal vector.

  • GPS receivers find your position as the point where spheres centred on several satellites meet.

  • Robot arms and drones are steered by vector equations of lines and the angles between them.

Save your progress with a free account