Lesson 4 of 8 · 18 min
Projections, work and relative velocity
Use scalar and vector projections to resolve vectors and find the shortest distance from a point to a line, then model forces, work and relative velocity in three dimensions.
What you will be able to do
- Find the scalar projection and the vector projection .
- Split a vector into parts parallel and perpendicular to another, and use this to find the shortest distance from a point to a line.
- Model displacement, force, work and relative velocity problems with 3D vectors.
Shine a torch straight down onto a ramp and a stick held above it casts a shadow along the ramp. The length of that shadow is the scalar projection; the shadow itself, as an arrow, is the vector projection. Projections answer "how much of this vector points that way?", which is exactly what you need for forces along a slope, work done, and closest distances.
Drag and . The projection is the foot of the perpendicular from the head of to the line of . When does the projection point backwards along ? The picture is the same in three dimensions: it lies in the plane containing and .
Key idea
Scalar and vector projections of a on b
The scalar projection is negative when the angle is obtuse. The vector projection is always parallel to .
Find the scalar projection of on .
For the same vectors, find the vector projection of on .
Key idea
Parallel and perpendicular parts
Every vector splits into a part parallel to and a part perpendicular to it:
The perpendicular part gives the shortest distance from a point to a line: for a point and a line through with direction , it is the length of the part of perpendicular to .
Worked example
Shortest distance from a point to a line
A line passes through with direction . The point is .
(a) Find the vector projection of on .
(b) Hence find the exact shortest distance from to the line, and the point on the line closest to .
Step 1: Find
.
Step 2: Find the dot products
and .
Step 3: Find the vector projection
Step 4: Subtract to get the perpendicular part
This part of is at right angles to the line, so it runs from the line straight to . Check: .
Step 5: Its length is the distance
.
Step 6: Find the foot of the perpendicular
.
Try it yourself first, then check the working one step at a time.
Answer
The vector projection is ; the shortest distance is units, at .
Method
Join a point on the line to .
Project on and subtract to get the perpendicular part.
Its length is the distance; plus the projection is the closest point.
Check: , here .
Watch out for
Using the position vector of instead of .
Dividing by instead of in the vector projection.
Definition
Work done by a force
A constant force (newtons) moving an object through a displacement (metres) does work
Only the part of the force along the displacement does work, which is why it is a dot product.
A force newtons moves a crate in a straight line from to , with distances in metres. Find the work done.
Definition
Relative velocity
The velocity of relative to is how appears to move to an observer travelling with :
Likewise, the position of relative to is .
A boat moves with velocity and a helicopter with velocity , both in . Find the velocity of the helicopter relative to the boat.
Worked example
Do two drones come too close?
Two drones fly in straight lines at constant velocity. Take east, north and up, with distances in metres. At seconds drone is at with velocity , and drone is at with velocity .
Safety rules require the drones to stay at least 10 m apart. Determine whether the rule is broken, and if so, when the drones are closest.
Step 1: Find the relative position and velocity
At the position of relative to is . The velocity of relative to is .
Working relative to turns two moving objects into one: moving past a fixed .
Step 2: Write the separation at time
.
Step 3: Square its length
Minimising the squared distance avoids square roots, and the minimum happens at the same .
Step 4: Find the minimum of the quadratic
The turning point is at s, where .
Step 5: Find the closest distance
m.
Step 6: Interpret
The drones come within about 9.9 m of each other, about 10.2 s after the start, so the 10 m rule is broken, though only just.
Reasonableness: they start m apart and close at about , so meeting the closest point after about 10 s is sensible.
Try it yourself first, then check the working one step at a time.
Answer
Yes. The drones are closest about 10.2 s after the start, when they are about 9.88 m apart, less than the required 10 m.
Method
Work relative to one object: subtract positions and subtract velocities.
Write the separation as a function of and minimise its square.
Equivalently, the closest approach is the length of the part of the initial separation perpendicular to the relative velocity.
Answer the question that was asked, with units.
Watch out for
Finding the closest distance between the two flight paths instead. The paths can come closer than the drones do, because the drones pass those points at different times.
Subtracting velocities in one order and positions in the other.
Exam tip
Modelling questions
Define your axes (" east, north, up"), write each quantity as a vector with units, and answer in words with units and a sensible number of decimal places. Check reasonableness: a closest distance cannot exceed the starting distance, and work done against a force is negative.
Summary
Scalar projection of on : . Vector projection: .
Subtracting the vector projection leaves the part perpendicular to ; its length is the distance from a point to a line.
Work done: .
Relative velocity: .
Finished the lesson?
Try the 4 quick checks above and the lesson completes itself, or mark it complete now.