Specialist Mathematics · Unit 1 · Topic 3

Vectors in the plane

Represent displacement, velocity and force as vectors, combine them geometrically with scalar multiples and the triangle rule, and describe them in column, i–j and polar form using magnitude, direction and unit vectors.

  • 8 lessons
  • 2 h 10 min of lessons
  • 15 worked examples
  • 10 hours in the syllabus
0 of 8

Start here

Scalars, vectors and vector notation

Lesson 1 of 8 · 15 min

Start the topic

Lessons

8
  1. Scalars, vectors and vector notation (up next)

    Tell scalars from vectors, describe a vector by its magnitude and direction, and read and write the vector notations QCAA uses.

  2. Equal vectors, negatives and scalar multiples

    Decide when two vectors are equal, write the negative of a vector, and draw and describe scalar multiples such as 3a3\mathbf{a} and −12a-\tfrac{1}{2}\mathbf{a}.

  3. Adding and subtracting vectors with the triangle rule

    Add vectors head to tail with the triangle rule, subtract by adding the negative, and see sums and differences as the two diagonals of a parallelogram.

  4. Writing a vector in terms of other vectors

    Express any vector in a triangle, parallelogram or hexagon as a combination of given vectors by finding a route, using midpoints and ratios, and use the result to show lines are parallel.

  5. Resultant displacement, velocity and force

    Model journeys, currents and pulling forces as vectors, draw the vector triangle, and find the resultant's magnitude and direction with right-angled trigonometry or the cosine and sine rules.

  6. Position vectors, column vectors and i–j form

    Describe vectors by their components, as ordered pairs, column vectors and combinations of the unit vectors i and j, and write the position vector of any point.

  7. Magnitude, direction and unit vectors from components

    Calculate a vector's exact magnitude and its direction in the right quadrant from its components, find the unit vector in any direction, and build a vector of a given length.

  8. Polar form and converting between forms

    Write a vector in polar form (r,θ)(r, \theta) and convert between polar and Cartesian form, exactly by hand for special angles and to a given accuracy with technology.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

A vector is a quantity with a size and a direction: a displacement of 5 km north-east, a velocity of 20 m s−120\ \mathrm{m\,s^{-1}} due south, a force of 50 N straight down. You can draw one as an arrow, and arrows can be slid, stretched, reversed and joined head to tail without any coordinates at all.

This topic builds that geometric picture first: notation, equal vectors, scalar multiples, sums and differences by the triangle rule, and writing one vector in terms of others. Then it puts vectors on the Cartesian plane, so you can describe any vector by its components xi^+yj^x\hat{\mathbf{i}} + y\hat{\mathbf{j}}, by its magnitude and direction, or in polar form (r,θ)(r, \theta), and move between those forms with and without technology.

The next topic, Algebra of vectors in two dimensions, uses all of this to calculate with vectors in Cartesian form.

Before you start

  • Pythagoras' theorem and right-angled trigonometry, with angles in degrees.
  • The sine and cosine rules for any triangle (both are on the formula sheet).
  • Exact values of sine, cosine and tangent for 30∘30^\circ, 45∘45^\circ and 60∘60^\circ.
  • True bearings and compass bearings.
  • Simplifying surds and rationalising a denominator.
  • Plotting points and reading coordinates on the Cartesian plane.

What QCAA says you need to know16 dot points

Representing vectors in the plane by directed line segments

5 hours

Vectors in two dimensions

5 hours

Subject matter from the Specialist Mathematics General senior syllabus 2025 v1.4 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Scalars and vectors

    Tell scalar quantities (distance, speed, mass) from vector quantities (displacement, velocity, force).

    Practise
  • Vector notation and equality

    Read and write AB with an arrow, bold and tilde vectors, magnitudes and unit vectors; decide when vectors are equal or negatives.

    Practise
  • Describing magnitude and direction

    Describe a vector by its size and its direction, as an angle from the positive x-axis or as a true bearing.

    Practise
  • Scalar multiples

    Draw and describe ka, use |ka| = |k||a|, and recognise parallel vectors and collinear points.

    Practise
  • Adding and subtracting vectors

    Use the triangle and parallelogram rules to draw sums and differences and to simplify vector expressions.

    Practise
  • Vectors in terms of other vectors

    Write any vector in a shape as a combination of given vectors, using routes, midpoints and ratios, and prove geometric results.

    Practise
  • Resultants in context

    Find the magnitude and direction of a resultant displacement, velocity or force from a vector triangle.

    Practise
  • Column vectors and i–j form

    Write position vectors and other vectors as ordered pairs, column vectors and combinations of the unit vectors i and j.

    Practise
  • Magnitude and direction from components

    Calculate the exact magnitude of a vector from its components and its direction angle in the correct quadrant.

    Practise
  • Unit vectors

    Find the unit vector in the direction of a vector and use it to build a vector of any given magnitude.

    Practise
  • Polar and Cartesian form

    Write vectors in polar form (r, θ) and convert between polar and Cartesian form, exactly by hand and with technology.

    Practise

Worked examples15

All 15

Common mistakes

Writing a vector without a tilde

By hand, aa is a number and a∼\tvec{a} is a vector. Mark every vector with a tilde (or an arrow) in your working.

Setting a vector equal to a number

Write ∣a∼∣=5|\tvec{a}| = 5, not a∼=5\tvec{a} = 5. A vector can only equal another vector.

A negative magnitude

−3a-3\mathbf{a} has magnitude 3∣a∣3|\mathbf{a}|. A negative scalar reverses the direction; magnitudes are never negative.

Drawing a−b\mathbf{a} - \mathbf{b} the wrong way

With tails together, a−b\mathbf{a} - \mathbf{b} runs from the head of b\mathbf{b} to the head of a\mathbf{a}. The other way is b−a\mathbf{b} - \mathbf{a}.

Adding magnitudes

∣a+b∣=∣a∣+∣b∣|\mathbf{a} + \mathbf{b}| = |\mathbf{a}| + |\mathbf{b}| only when a\mathbf{a} and b\mathbf{b} point the same way. Otherwise solve the vector triangle.

Losing a minus sign on a route

Going against an arrow gives the negative: if AB→=a\overrightarrow{AB} = \mathbf{a}, the leg from BB to AA is −a-\mathbf{a}.

The wrong angle in the cosine rule

Head to tail, the angle inside the triangle is 180∘180^\circ minus the angle between the two directions. Sketch the triangle and mark the angle you use.

Trusting tan⁡−1\tan^{-1} for the direction

tan⁡−1(yx)\tan^{-1}\left(\frac{y}{x}\right) only gives angles between −90∘-90^\circ and 90∘90^\circ. For vectors in the second and third quadrants, adjust using a sketch.

Calculator in the wrong angle mode

In radian mode cos⁡(150)\cos(150) is about 0.6990.699, not −0.866-0.866. Check degrees or radians before converting.

Misreading wind and current directions

A wind "from the west" blows towards the east. A current is described by the way it flows.

Exam tips

  1. Draw the vector triangle or diagram, labelled with sizes, directions and the angle you use. A clear sketch often earns a method mark and catches direction errors.

  2. State every direction with its reference: "53.1∘53.1^\circ anticlockwise from the positive xx-axis" or "a bearing of 036.9∘T036.9^\circ\text{T}".

  3. In technology-free questions, keep magnitudes and components exact: 2102\sqrt{10}, not 6.326.32.

  4. Keep unrounded values in your calculator between steps and round only the final answers, to the accuracy the question asks for.

  5. To show lines are parallel, write one vector as a scalar multiple of the other and say what that means in words. For collinear points, also name the shared point.

  6. Magnitude, direction, unit vectors and the sine and cosine rules are on the formula sheet. Exact values are not: learn them for 30∘30^\circ, 45∘45^\circ and 60∘60^\circ.

  7. Check the interval asked for θ\theta in polar form, such as 0∘≤θ<360∘0^\circ \le \theta < 360^\circ or −180∘<θ≤180∘-180^\circ < \theta \le 180^\circ.

  8. Check reasonableness: ∣a+b∣|\mathbf{a} + \mathbf{b}| lies between ∣∣a∣−∣b∣∣\big||\mathbf{a}| - |\mathbf{b}|\big| and ∣a∣+∣b∣|\mathbf{a}| + |\mathbf{b}|, and the squares of a unit vector's components add to 1.

  9. Units 1 and 2 are assessed by your school. The QCAA external exam covers Units 3 and 4, but it assumes everything in this topic, including the vector work in three dimensions that builds on it.

Where this shows up

  • Pilots and sailors add their own velocity to the wind's or the current's to find where they will actually go.

  • Engineers add the forces from cables, loads and supports to check that a bridge or crane is safe.

  • Video games and animation store every position and movement as a vector, and use unit vectors to point characters and cameras.

  • Drones and robots are steered by velocity commands given as a speed and a heading, which is polar form.

  • Surveyors and GPS receivers record positions as distances and bearings from a fixed point.

  • Physics describes displacement, velocity, acceleration and force as vectors, and resolves them into components.

Save your progress with a free account