Specialist Mathematics · Unit 3 · Topic 4

Vector calculus

Describe motion in the plane and in space with position vectors that depend on time, find the Cartesian equation of a path, and differentiate and integrate vector functions to model straight-line, projectile and circular motion.

  • 8 lessons
  • 2 h 5 min of lessons
  • 13 worked examples
  • 9 hours in the syllabus
0 of 8

Start here

Position as a function of time

Lesson 1 of 8 · 13 min

Start the topic

Lessons

8
  1. Position as a function of time (up next)

    Describe a moving particle by a position vector whose components depend on time, find where it is at any moment, and calculate displacements and distances between positions.

  2. The Cartesian equation of a path

    Turn a vector equation of a path into a Cartesian equation in x and y by eliminating t, and state the part of the curve the particle actually covers.

  3. Circles, ellipses and hyperbolas

    Use the Pythagorean identities to find the Cartesian equation of a path whose components are trigonometric, and recognise circles, ellipses and hyperbolas with their centres and direction of motion.

  4. Do the particles meet, or do their paths only cross?

    Compare the positions of two particles given as vector functions of time, and decide whether they collide or their paths merely cross.

  5. Velocity and acceleration vectors

    Differentiate a position vector component by component to find velocity and acceleration, then use them for speed, direction of motion and the times a particle moves in a given direction.

  6. Integrating vector functions and straight-line motion

    Integrate acceleration and velocity vectors component by component, use initial conditions to find the vector constant, and derive equations of motion for a particle moving in a straight line.

  7. Projectile motion in vector form

    Integrate the constant acceleration due to gravity to find a projectile's velocity and position vectors, then its time of flight, range, maximum height and path.

  8. Circular motion in vector form

    Model uniform circular motion with r=Rcos⁡(ωt)i^+Rsin⁡(ωt)j^\mathbf{r} = R\cos(\omega t)\hat{\mathbf{i}} + R\sin(\omega t)\hat{\mathbf{j}}, show that velocity is tangent to the circle and acceleration points to the centre, and find speed, period and centripetal acceleration.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

A ball in flight, a car on a roundabout and a drone on a survey run all have a position that changes with time. Write that position as a vector whose components are functions of time, r(t)=x(t)i^+y(t)j^\mathbf{r}(t) = x(t)\hat{\mathbf{i}} + y(t)\hat{\mathbf{j}}, and one equation describes the whole journey: where the object is, where it is heading and how fast.

This topic starts with position vectors as functions of time and the paths they trace. You will turn a vector equation into a Cartesian equation, including circles, ellipses and hyperbolas, and decide whether two moving particles collide or only cross paths. Then calculus takes over: differentiate r(t)\mathbf{r}(t) component by component to get velocity and acceleration, and integrate acceleration back to velocity and position. You will finish by modelling straight-line motion, projectiles and circular motion in vector form, with and without technology.

It builds on the vectors of Units 1 and 3 and the calculus of Mathematical Methods. Unit 4's Modelling motion topic adds forces and momentum to the same ideas.

Before you start

Builds on Vectors in the plane, Algebra of vectors in two dimensions and Vectors in two and three dimensions.

  • Vectors in i^\hat{\mathbf{i}}, j^\hat{\mathbf{j}}, k^\hat{\mathbf{k}} form: adding, scalar multiples, magnitude, unit vectors and the scalar (dot) product.
  • Differentiating polynomials, ekte^{kt}, sin⁡(kt)\sin(kt), cos⁡(kt)\cos(kt) and ln⁡(t)\ln(t), with the chain rule (Mathematical Methods).
  • Antidifferentiating the same functions, and using an initial condition to find the constant.
  • Displacement, velocity and acceleration in a straight line as derivatives (Mathematical Methods).
  • The identities sin⁡2(θ)+cos⁡2(θ)=1\sin^2(\theta) + \cos^2(\theta) = 1 and sec⁡2(θ)−tan⁡2(θ)=1\sec^2(\theta) - \tan^2(\theta) = 1.
  • Radian measure, and the graphs of circles from Year 11.

What QCAA says you need to know6 dot points

Vector calculus

9 hours

Subject matter from the Specialist Mathematics General senior syllabus 2025 v1.4 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Position as a function of time

    Evaluate r(t) at given times, find displacements and distances between positions, and sketch the path with its direction of motion.

    Practise
  • Cartesian equations by substitution

    Eliminate t from x(t) and y(t) by making t the subject, and state the part of the curve the particle actually covers.

    Practise
  • Circles, ellipses and hyperbolas

    Use cos² + sin² = 1 and sec² − tan² = 1 to find the Cartesian equation of a circular, elliptical or hyperbolic path.

    Practise
  • Do the particles meet?

    Decide whether two particles collide (same place, same time) or only cross paths (same place, different times).

    Practise
  • Velocity and acceleration vectors

    Differentiate a vector function component by component to find velocity and acceleration.

    Practise
  • Speed and direction of motion

    Find speed as the magnitude of velocity, and use velocity to find when a particle moves in a given direction or at right angles to its position.

    Practise
  • Integrating vector functions

    Integrate acceleration and velocity component by component, using initial conditions to find the vector constant.

    Practise
  • Straight-line motion in vector form

    Derive and use equations of motion for a particle moving along a line, with constant or variable acceleration.

    Practise
  • Projectile motion in vector form

    Integrate a = −g j to find velocity and position, then time of flight, range, maximum height and the Cartesian path.

    Practise
  • Circular motion in vector form

    Use r = R cos(ωt) i + R sin(ωt) j to find speed, period, and the centripetal acceleration a = −ω² r.

    Practise

Worked examples13

All 13

Common mistakes

Treating meeting and crossing as the same

To test whether particles meet, use one time variable: rA(t)=rB(t)\mathbf{r}_A(t) = \mathbf{r}_B(t). To test whether their paths cross, use two: rA(t1)=rB(t2)\mathbf{r}_A(t_1) = \mathbf{r}_B(t_2). Every component must agree.

Forgetting the vector constant

Integrating a(t)\mathbf{a}(t) gives v(t)+C\mathbf{v}(t) + \mathbf{C}, where C\mathbf{C} has a constant in every component. Evaluate at the known time, even when that time is not t=0t = 0.

Speed as a sum of components

Speed is x˙2+y˙2\sqrt{\dot{x}^2 + \dot{y}^2}, not x˙+y˙\dot{x} + \dot{y}. And it comes from velocity, not position.

Giving the whole curve

If x=t2x = t^2, then x≥0x \ge 0; if x=2cos⁡(t)x = 2\cos(t) for 0≤t≤π0 \le t \le \pi, only the top half of the ellipse is traced. State the restriction with the Cartesian equation.

Squaring and adding the wrong thing

From x=3cos⁡(t)x = 3\cos(t), isolate the trig function first: cos⁡(t)=x3\cos(t) = \frac{x}{3}. Then cos⁡2(t)+sin⁡2(t)=1\cos^2(t) + \sin^2(t) = 1 gives x29+…\frac{x^2}{9} + \dots, not x2+⋯=3x^2 + \dots = 3.

Signs in projectile motion

With up positive, a=−gj^\mathbf{a} = -g\hat{\mathbf{j}}. A ball launched from a cliff of height hh starts at hj^h\hat{\mathbf{j}} and lands when the j^\hat{\mathbf{j}}-component is 00, not hh.

Calculator in degree mode

Calculus with trigonometric functions needs radians. ddtsin⁡(t)=cos⁡(t)\frac{d}{dt}\sin(t) = \cos(t) is only true when tt is in radians.

Exam tips

  1. Show the component-by-component working for derivatives and integrals. Writing v(t)=drdt=…\mathbf{v}(t) = \dfrac{d\mathbf{r}}{dt} = \dots with each component differentiated earns the method mark even if a later step slips.

  2. When you find a vector constant, write it out: "at t=0t = 0, r=2i^+j^\mathbf{r} = 2\hat{\mathbf{i}} + \hat{\mathbf{j}}, so C=…\mathbf{C} = \dots". Markers look for the substitution.

  3. For "do the particles collide?", solve one component for tt and check the other component at that time. A justified "no" needs the component that disagrees.

  4. Give the Cartesian equation with any restriction on xx or yy, and say which way the particle moves along the path if asked to sketch it.

  5. In technology-active questions, a graphics calculator in parametric mode draws x(t)x(t) and y(t)y(t) and can find intersections, but write down the equations you solved.

  6. Speed and distance are scalars; velocity and displacement are vectors. Answer in the form the question uses, with units.

  7. In projectile questions, state the assumptions: air resistance ignored, g=9.8 m s−2g = 9.8\ \mathrm{m\,s^{-2}} unless given, origin and positive directions.

  8. Check reasonableness: the velocity should be tangent to your sketch of the path, and in circular motion v⋅r=0\mathbf{v} \cdot \mathbf{r} = 0.

Where this shows up

  • Air traffic control tracks each aircraft as a position vector in time and checks whether two flight paths bring planes to the same place at the same time.

  • Sports analysts model the flight of a cricket ball, a shot put or a kicked football as projectile motion to find the best launch angle.

  • Satellites in circular orbit and cars on a roundabout have velocity tangent to the circle and acceleration towards the centre.

  • Robot arms and CNC machines follow paths given as parametric equations, with the velocity limited at every point.

  • Animation and game engines move characters along curves by stepping the parameter and differentiating to aim cameras along the direction of motion.

  • GPS receivers estimate velocity by differentiating a sequence of position fixes.

Save your progress with a free account