Lesson 8 of 8 · 22 min

Equations of planes and spheres

Write vector and Cartesian equations of planes and regions in a plane, find where a line meets a plane and the angles involved, and use the equation of a sphere.

What you will be able to do

  • Write the vector equation r⋅n=a⋅n\mathbf{r} \cdot \mathbf{n} = \mathbf{a} \cdot \mathbf{n} and the Cartesian equation ax+by+cz+d=0ax + by + cz + d = 0 of a plane, including the plane through three points.
  • Describe a plane, and parallelogram and triangle regions in it, with two parameters.
  • Find where a line meets a plane, the angle between them, and the distance from a point to a plane.
  • Write the equation of a sphere and find its centre and radius by completing the square.

A line is fixed by a point and a direction. A plane is fixed by a point and the direction it faces: its normal vector. Picture a tabletop. The direction straight up from it is perpendicular to every line you could draw on the table. That single fact gives the equation of the plane.

For every point RR in the plane, AR→\overrightarrow{AR} is perpendicular to the normal n\mathbf{n}, so (r−a)⋅n=0(\mathbf{r} - \mathbf{a}) \cdot \mathbf{n} = 0.

Key idea

Equations of a plane

The plane through the point AA (position vector a\mathbf{a}) with normal n=(abc)\mathbf{n} = \begin{pmatrix} a \\ b \\ c \end{pmatrix} has

  • vector equation r⋅n=a⋅n\mathbf{r} \cdot \mathbf{n} = \mathbf{a} \cdot \mathbf{n},
  • Cartesian equation ax+by+cz=a⋅nax + by + cz = \mathbf{a} \cdot \mathbf{n}, which rearranges to ax+by+cz+d=0ax + by + cz + d = 0 with d=−a⋅nd = -\mathbf{a} \cdot \mathbf{n}.

Read the normal straight from the coefficients: 2x−y+4z=72x - y + 4z = 7 has normal 2i^−j^+4k^2\hat{\mathbf{i}} - \hat{\mathbf{j}} + 4\hat{\mathbf{k}}.

Find the Cartesian equation of the plane through (2,−1,3)(2, -1, 3) with normal vector 4i^+j^−2k^4\hat{\mathbf{i}} + \hat{\mathbf{j}} - 2\hat{\mathbf{k}}.

Reads asYour answer shows here as maths.
Interactive

A plane and its normal

The plane x+y+2z=4x + y + 2z = 4 with its normal, and a line LL that passes through it. Rotate the view: the normal is perpendicular to every direction within the plane. Where does LL cross the plane?

Worked example

The plane through three points

  • Complex familiar
  • Technology free

Find the vector and Cartesian equations of the plane through A(1,2,0)A(1, 2, 0), B(3,0,1)B(3, 0, 1) and C(0,1,2)C(0, 1, 2).

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Form two vectors in the plane from one point.

  2. Their cross product is a normal n\mathbf{n} (simplify it if you can).

  3. r⋅n=a⋅n\mathbf{r} \cdot \mathbf{n} = \mathbf{a} \cdot \mathbf{n}, then expand for the Cartesian form.

  4. Substitute the other points to check.

Watch out for

  • Using position vectors a\mathbf{a} and b\mathbf{b} instead of AB→\overrightarrow{AB} and AC→\overrightarrow{AC}: their cross product is not normal to the plane.

  • A sign slip in the middle component of the cross product. The check with BB and CC would expose it.

Definition

Planes and regions with two parameters

If u\mathbf{u} and v\mathbf{v} are non-parallel vectors in the plane, every point of the plane is

r=a+su+tv,s,t∈R.\mathbf{r} = \mathbf{a} + s\mathbf{u} + t\mathbf{v}, \quad s, t \in \mathbb{R}.

Restricting the parameters gives regions of the plane:

  • 0≤s≤10 \le s \le 1, 0≤t≤10 \le t \le 1: the parallelogram with corner AA and sides u\mathbf{u} and v\mathbf{v};
  • s≥0s \ge 0, t≥0t \ge 0, s+t≤1s + t \le 1: the triangle with vertices a\mathbf{a}, a+u\mathbf{a} + \mathbf{u} and a+v\mathbf{a} + \mathbf{v}.

The normal is n=u×v\mathbf{n} = \mathbf{u} \times \mathbf{v}, which links this form to r⋅n=a⋅n\mathbf{r} \cdot \mathbf{n} = \mathbf{a} \cdot \mathbf{n}.

Key idea

Where a line meets a plane

Substitute the parametric equations of the line into the Cartesian equation of the plane and solve for tt. Then put tt back into the line.

  • One solution: the line crosses the plane at one point.
  • No solution (you get something like 5=95 = 9): the line is parallel to the plane.
  • Every tt works (like 5=55 = 5): the line lies in the plane.

A quick test: the line is parallel to the plane exactly when d⋅n=0\mathbf{d} \cdot \mathbf{n} = 0.

Worked example

Where a line meets a plane, and at what angle

  • Complex familiar
  • Technology active

The line LL has equation r=(i^+2j^−k^)+t(2i^−j^+3k^)\mathbf{r} = (\hat{\mathbf{i}} + 2\hat{\mathbf{j}} - \hat{\mathbf{k}}) + t(2\hat{\mathbf{i}} - \hat{\mathbf{j}} + 3\hat{\mathbf{k}}) and the plane Π\Pi has equation 2x+y+z=152x + y + z = 15.

(a) Find the point where LL meets Π\Pi.

(b) Find the angle between LL and Π\Pi, to one decimal place.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Substitute the parametric equations into the plane and solve for tt.

  2. Put tt back into the line for the point; check it in the plane.

  3. Angle with a plane: sin⁡(α)=∣d⋅n∣∣d∣∣n∣\sin(\alpha) = \frac{|\mathbf{d} \cdot \mathbf{n}|}{|\mathbf{d}||\mathbf{n}|}.

Watch out for

  • Giving 49.1∘49.1^\circ, the angle between the line and the normal.

  • Stopping at t=2t = 2 without finding the point.

Find the point where the line r=(i^+2k^)+t(i^+j^−k^)\mathbf{r} = (\hat{\mathbf{i}} + 2\hat{\mathbf{k}}) + t(\hat{\mathbf{i}} + \hat{\mathbf{j}} - \hat{\mathbf{k}}) meets the plane x+2y+z=9x + 2y + z = 9.

Angles and distances with planes
To findUse
Angle θ\theta between two planescos⁡(θ)=∣n1⋅n2∣∣n1∣∣n2∣\cos(\theta) = \dfrac{|\mathbf{n}_1 \cdot \mathbf{n}_2|}{|\mathbf{n}_1||\mathbf{n}_2|} (the acute angle between the normals)
Angle α\alpha between a line and a planesin⁡(α)=∣d⋅n∣∣d∣∣n∣\sin(\alpha) = \dfrac{|\mathbf{d} \cdot \mathbf{n}|}{|\mathbf{d}||\mathbf{n}|} (the complement of the angle with the normal)
Distance from point PP to the plane through AA∣AP→⋅n^∣\left|\overrightarrow{AP} \cdot \hat{\mathbf{n}}\right|, the scalar projection of AP→\overrightarrow{AP} on the normal

A sphere is the three-dimensional version of a circle: every point at distance rr from a centre CC. In vector form that is ∣x−c∣=r|\mathbf{x} - \mathbf{c}| = r, where x\mathbf{x} is the position vector of a point on the sphere. Square both sides and expand the magnitude, and you get its Cartesian equation.

Key idea

Equation of a sphere

The sphere with centre (h,k,l)(h, k, l) and radius rr is

(x−h)2+(y−k)2+(z−l)2=r2.(x - h)^2 + (y - k)^2 + (z - l)^2 = r^2.

A point is inside the sphere if the left side is less than r2r^2, and outside if it is greater.

Worked example

Centre and radius of a sphere

  • Simple familiar
  • Technology free

A sphere has equation x2+y2+z2−4x+6y−2z−11=0x^2 + y^2 + z^2 - 4x + 6y - 2z - 11 = 0.

(a) Find its centre and radius.

(b) Does the point (5,1,1)(5, 1, 1) lie inside, on or outside the sphere?

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Group the terms in each variable and move the constant across.

  2. Complete the square for each, adding the same to both sides.

  3. Read the centre (signs flipped) and the radius (right side\sqrt{\text{right side}}).

Watch out for

  • Giving the centre as (−2,3,−1)(-2, 3, -1).

  • Giving the radius as 25.

Find the centre of the sphere x2+y2+z2+2x−8z=8x^2 + y^2 + z^2 + 2x - 8z = 8.

Common mistake

Radius or radius squared?

In (x−2)2+(y+3)2+(z−1)2=25(x - 2)^2 + (y + 3)^2 + (z - 1)^2 = 25 the radius is 25=5\sqrt{25} = 5. And when you complete the square, add the same numbers to both sides.

Summary

  • Plane through a\mathbf{a} with normal n\mathbf{n}: r⋅n=a⋅n\mathbf{r} \cdot \mathbf{n} = \mathbf{a} \cdot \mathbf{n}, or ax+by+cz+d=0ax + by + cz + d = 0 with n=(a,b,c)\mathbf{n} = (a, b, c).

  • Through three points AA, BB, CC: n=AB→×AC→\mathbf{n} = \overrightarrow{AB} \times \overrightarrow{AC}.

  • r=a+su+tv\mathbf{r} = \mathbf{a} + s\mathbf{u} + t\mathbf{v} describes the plane; restricting ss and tt gives parallelogram and triangle regions.

  • Line meets plane: substitute the parametric equations into the Cartesian equation and solve for tt.

  • Angle between planes uses cos⁡\cos with the normals; line and plane uses sin⁡\sin; distance to a plane is ∣AP→⋅n^∣|\overrightarrow{AP} \cdot \hat{\mathbf{n}}|.

  • Sphere: (x−h)2+(y−k)2+(z−l)2=r2(x - h)^2 + (y - k)^2 + (z - l)^2 = r^2. Complete the square to find the centre and radius.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 8 of 80% read

Save your progress with a free account