Lesson 1 of 12 · 14 min

Resolving and adding vectors

Split any vector into perpendicular components, then add or subtract vectors by their components and recombine them into a resultant with a direction.

What you will be able to do

  • Resolve a vector into perpendicular components, Fx=Fcos⁡θF_x = F\cos\theta and Fy=Fsin⁡θF_y = F\sin\theta.
  • Add or subtract vectors by adding or subtracting their components.
  • Recombine components into a resultant with a magnitude and a direction from a stated reference.

In Unit 2 every vector lay along one line, so a positive or negative sign was enough to show its direction. In this topic vectors point any way in a plane: a ball kicked upwards at an angle, a rope pulling a sled, two tugboats pulling a ship.

Drag a sled with a rope at 30°30° above the ground and only part of your pull moves the sled forwards. The rest lifts the front of the sled. Working out how much of a vector acts in a particular direction is called resolving the vector.

Interactive

Split a vector into components

Drag the tip of FF around. When is its horizontal component largest? When is it zero? What happens to the components when FF points down and to the left?

Key idea

Resolving a vector

A vector of magnitude FF at an angle θ\theta above the horizontal can be replaced by two perpendicular components:

Fx=Fcos⁡θFy=Fsin⁡θF_x = F\cos\theta \qquad F_y = F\sin\theta

The components add head to tail to give the original vector, so they can stand in for it in any calculation.

The components form the two shorter sides of a right-angled triangle with FF as the hypotenuse.

Cosine goes with the side adjacent to the angle and sine with the side opposite it. If an angle is measured from the vertical instead, the vertical component becomes the adjacent side and uses cosine. Look at where the angle is before you choose.

A quick check: when θ=0\theta = 0 the vector is horizontal, so FxF_x must equal FF. Since cos⁡0=1\cos 0 = 1, it does.

A football is kicked at 18 m s−118\unit{m\,s^{-1}} at 40°40° above the horizontal. Calculate the horizontal component of its velocity, to two significant figures.

in m s -1

Give 2 significant figures.

Adding vectors at angles. Components turn this into bookkeeping. Resolve every vector along the same pair of perpendicular axes, add all the xx components, add all the yy components, then put the two totals back together.

Adding vectors by components

  1. Choose axes

    Pick perpendicular xx and yy directions (east and north, horizontal and vertical, or along and across a slope) and decide which way is positive.

  2. Resolve each vector

    Write FxF_x and FyF_y for every vector, with signs. A component pointing west, south or down is negative.

  3. Add the components

    Rx=∑FxR_x = \sum F_x and Ry=∑FyR_y = \sum F_y. To subtract a vector, subtract its components.

  4. Recombine

    R=Rx2+Ry2R = \sqrt{R_x^2 + R_y^2} and θ=tan⁡−1(∣Ry∣∣Rx∣)\theta = \tan^{-1}\left(\frac{|R_y|}{|R_x|}\right). The signs of RxR_x and RyR_y tell you which way the resultant points.

Worked example

Add two forces by components

  • Complex familiar
  • Technology active

Two tugboats pull a ship out of a harbour. Tug A pulls with a force of 12 kN12\unit{kN} at 25°25° north of east. Tug B pulls with a force of 15 kN15\unit{kN} at 40°40° south of east.

Determine the magnitude and direction of the resultant force the two tugs exert on the ship.

The two tug forces, drawn to scale (0.3 units per kilonewton).

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Choose perpendicular axes and a sign for each direction.

  2. Resolve every vector: Fx=Fcos⁡θF_x = F\cos\theta, Fy=Fsin⁡θF_y = F\sin\theta for an angle measured from the xx-axis.

  3. Add the xx components, then add the yy components.

  4. Recombine: R=Rx2+Ry2R = \sqrt{R_x^2 + R_y^2} and θ=tan⁡−1(RyRx)\theta = \tan^{-1}\left(\frac{R_y}{R_x}\right), stating the reference direction.

Watch out for

  • Adding the magnitudes, 12+15=27 kN12 + 15 = 27\unit{kN}. Forces at different angles only add as vectors.

  • Forgetting that the southward component is negative, which gives a resultant north of east.

  • Giving the angle without saying what it is measured from. "12°12°" alone is not a direction.

Two forces act on a box on a smooth floor: 30 N30\unit{N} east and 40 N40\unit{N} north. Which is the resultant force?

Choose one answer

Subtracting vectors. A change in velocity is final minus initial, Δv⃗=v⃗−u⃗\Delta\vec{v} = \vec{v} - \vec{u}. Subtract component by component. You will need this for circular motion, where an object's speed stays the same while its velocity keeps changing.

A car travelling at 20 m s−120\unit{m\,s^{-1}} east turns a corner and is then travelling at 20 m s−120\unit{m\,s^{-1}} north. Calculate the magnitude of its change in velocity, to two significant figures.

in m s -1

Give 2 significant figures.

Common mistake

Where is the angle measured from?

Before you write cos⁡\cos or sin⁡\sin, find the side of the triangle next to the marked angle. A velocity "at 30°30° to the vertical" has a vertical component vcos⁡30°v\cos 30° and a horizontal component vsin⁡30°v\sin 30°. Also check that your calculator is in degree mode: cos⁡60°\cos 60° should be 0.50.5.

Exam tip

What the formula book does not give you

The formula book has no trigonometry and no component formulas. Draw the vector triangle, mark the angle and write the component as an expression, such as 12cos⁡25°12\cos 25°, before you evaluate it. Every vector answer needs a direction with a reference: "23 kN23\unit{kN} at 12°12° south of east", or "32 m s−132\unit{m\,s^{-1}} at 68°68° below the horizontal".

Summary

  • Any vector can be replaced by two perpendicular components: Fx=Fcos⁡θF_x = F\cos\theta and Fy=Fsin⁡θF_y = F\sin\theta for an angle measured from the xx-axis.

  • Cosine goes with the side adjacent to the angle, sine with the side opposite it.

  • To add vectors, resolve each one, add the xx components, add the yy components, then recombine.

  • To subtract, subtract the components. A change in velocity is Δv⃗=v⃗−u⃗\Delta\vec{v} = \vec{v} - \vec{u}.

  • Recombine with R=Rx2+Ry2R = \sqrt{R_x^2 + R_y^2} and θ=tan⁡−1(∣Ry∣∣Rx∣)\theta = \tan^{-1}\left(\frac{|R_y|}{|R_x|}\right), and state what the angle is measured from.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 1 of 120% read

Save your progress with a free account