Lesson 6 of 12 · 18 min

Net force on an inclined plane

Use free-body diagrams and vector analysis to find the net force and acceleration of an object on a slope with friction, tension or an applied force.

What you will be able to do

  • Choose axes parallel and perpendicular to a slope and resolve every force along them.
  • Find the normal force from the forces perpendicular to the slope.
  • Find the net force along the slope and the acceleration from a=Fnetma = \frac{F_{net}}{m}.
  • Include friction, tension and applied forces, including forces at an angle to the slope.

A skier gathering speed, a trolley rolling down a car park ramp and a crate dragged up a loading ramp are all the same problem: several forces at different angles, and you want the net force and the acceleration.

The trick is to pick axes that suit the slope. Along the slope is where any acceleration happens; across the slope nothing accelerates, so the forces there must balance.

The inclined plane method

  1. Draw the free-body diagram

    Weight (vertical), normal force (perpendicular to the surface), and any friction, tension or applied force, each labelled.

  2. Choose axes along and across the slope

    State which way along the slope is positive, usually the direction of motion.

  3. Resolve every force that is not along an axis

    The weight gives mgsin⁡θmg\sin\theta along and mgcos⁡θmg\cos\theta across. A rope at an angle α\alpha to the slope gives Tcos⁡αT\cos\alpha along and Tsin⁡αT\sin\alpha across.

  4. Balance the perpendicular forces

    There is no acceleration across the slope, so the perpendicular components sum to zero. This gives FNF_N.

  5. Sum the parallel components

    Add them with signs to get FnetF_{net}, then a=Fnetma = \frac{F_{net}}{m}.

Interactive

Forces on a slope

Find the angle at which the block starts to slide. Then apply a force up the slope and find the force that holds the block still. How does that force depend on the mass?

Note

How friction is given in this course

The simulation models friction as a fraction of the normal force. Questions in this course give you the friction force as a value, or let you work it out from the motion, for example when an object slides at a constant velocity. Friction always acts along the surface, against the motion or against the direction the object would slide.

Key idea

A frictionless slope

With only the weight and the normal force, the net force is mgsin⁡θmg\sin\theta down the slope, so

a=mgsin⁡θm=gsin⁡θa = \frac{mg\sin\theta}{m} = g\sin\theta

The mass cancels. Every object slides down a frictionless slope with the same acceleration, just as every object falls with the same acceleration.

A 2 kg2\unit{kg} block and a 6 kg6\unit{kg} block are released from rest on the same frictionless ramp. How do their accelerations compare?

Choose one answer

Constant velocity means zero net force. If an object slides down a slope at a steady speed, its acceleration is zero, so friction up the slope exactly balances mgsin⁡θmg\sin\theta down the slope. This is a common way to "find the friction" in a question.

A 6.0 kg6.0\unit{kg} toboggan slides down a slope inclined at 12°12° at a constant velocity. Calculate the friction force on the toboggan, to two significant figures.

in N

Give 2 significant figures.

Worked example

Net force on a crate pulled up a ramp

  • Complex familiar
  • Technology active

A 15 kg15\unit{kg} crate is pulled up a ramp inclined at 20°20° by a rope parallel to the ramp. The tension in the rope is 90 N90\unit{N}, and a friction force of 18 N18\unit{N} opposes the motion.

Determine the net force on the crate and its acceleration.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Draw the free-body diagram with every force.

  2. Use axes parallel and perpendicular to the slope.

  3. Resolve the weight into mgsin⁡θmg\sin\theta and mgcos⁡θmg\cos\theta.

  4. Sum the parallel components with signs, then a=Fnetma = \frac{F_{net}}{m}.

Watch out for

  • Forgetting the weight component and writing Fnet=90−18=72 NF_{net} = 90 - 18 = 72\unit{N}.

  • Pointing friction up the slope. Friction opposes the motion, which is up the slope here.

Common mistake

Friction points against the motion

Friction on a crate dragged up a ramp points down the ramp. On the same crate sliding back down, it points up. Decide the direction of motion (or the direction it would slide) first, then draw friction the other way.

Forces at an angle to the slope. A rope pulled at an angle to the surface does two jobs: its component along the slope pulls the object, and its component away from the slope lifts it, which reduces the normal force. Resolve it along the slope axes using the angle it makes with the slope, not with the horizontal.

Worked example

A sled pulled up a slope by an angled rope

  • Complex unfamiliar
  • Technology active

A child pulls a 20 kg20\unit{kg} sled up a snowy slope inclined at 15°15° to the horizontal. The rope makes an angle of 30°30° with the surface of the slope, and its tension is 120 N120\unit{N}. Friction on the sled is 30 N30\unit{N}.

Determine (a) the normal force on the sled and (b) its acceleration.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Choose axes parallel and perpendicular to the slope.

  2. Resolve every force that is not already along an axis, using the angle it makes with that axis.

  3. Perpendicular forces balance, which gives the normal force.

  4. Parallel forces give the net force and a=Fnetma = \frac{F_{net}}{m}.

Watch out for

  • Using 15°+30°=45°15° + 30° = 45° to resolve the tension along the slope. That angle is measured from the horizontal, not from the slope.

  • Leaving the normal force as mgcos⁡θmg\cos\theta when another force has a perpendicular component.

A trolley is released on a frictionless ramp inclined at 30°30°. What is its acceleration?

in m s -2

Exam tip

Show the vector analysis

"Determine the net force using vector analysis" expects a free-body diagram, a stated choice of axes, each component written as an expression (147sin⁡20°147\sin 20°), and the sum with signs. A correct number with no diagram or components rarely earns full marks.

Summary

  • Use axes along and across the slope, so only forces not along those lines need resolving.

  • Across the slope the forces balance, which gives the normal force. Any force with a component away from the slope reduces FNF_N below mgcos⁡θmg\cos\theta.

  • Along the slope, FnetF_{net} is the signed sum of the components, and a=Fnetma = \frac{F_{net}}{m}.

  • On a frictionless slope a=gsin⁡θa = g\sin\theta, whatever the mass.

  • Friction acts along the surface against the motion. Constant velocity means friction balances the other forces along the slope.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 6 of 120% read

Save your progress with a free account