Lesson 5 of 12 · 18 min
Weight, the normal force and slopes
Use , describe the normal force, and draw free-body diagrams on an inclined plane with the weight resolved along and across the slope.
What you will be able to do
- Calculate weight from mass with , and tell weight and mass apart.
- Describe the normal force and explain when it does and does not equal the weight.
- Draw free-body diagrams for objects on an inclined plane.
- Resolve the weight into down the slope and into the slope.
Step onto bathroom scales and they show a number. Strictly, the scales do not measure your weight: they measure how hard they push up on you. Ride the same scales in a lift that is speeding up and the number rises, although your weight has not changed.
That upward push is the normal force, and on a slope it is the key to the whole problem.
Definition
Weight and mass
Mass (kilograms) is the amount of matter in an object. It is the same on the Earth, the Moon or in orbit.
Weight (newtons) is the gravitational force on that mass, directed towards the centre of the Earth:
Calculate the weight of a student with a mass of . Give your answer to two significant figures.
The normal force. When an object presses on a surface, the surface deforms very slightly, like a very stiff spring, and pushes back. That push is always perpendicular to the surface, which is what "normal" means in geometry. It grows to whatever size stops the object sinking into the surface.
Because it adjusts, the normal force equals the weight only in one special case. Change the situation and it changes too.
Key idea
The normal force
The normal force is the contact force a surface exerts on an object, perpendicular to the surface. only when the surface is horizontal, no other force has a vertical component, and there is no vertical acceleration.
It is not the Newton's third law partner of the weight. The partner of the Earth pulling the object down is the object pulling the Earth up.
| Situation | Normal force |
|---|---|
| Resting on a level floor | |
| Level floor, pushed down with an extra vertical force | |
| Level floor, pulled up with a vertical force less than | |
| In a lift accelerating upwards at | |
| In a lift accelerating downwards at | |
| On a slope at angle , no other perpendicular forces |
Tilting the surface. On an inclined plane the weight still points straight down, but the normal force tilts with the surface. Friction, if there is any, acts along the surface, against sliding. A rope or a push acts along its own line.
The weight is now the odd one out: it is neither along the slope nor across it. Resolve it into a component parallel to the slope and a component perpendicular to it.
The angle between the weight and the line perpendicular to the slope equals the incline angle .
Key idea
Components of the weight on a slope
On a slope at angle to the horizontal:
If nothing else pushes or pulls across the slope, the normal force balances the perpendicular component: .
Increase the angle from towards . Which component of the weight grows and which shrinks? At what angle are the two components equal?
Worked example
Resolving the weight of a box on a ramp
An box rests on a ramp inclined at to the horizontal.
Calculate (a) the weight of the box, (b) the component of its weight parallel to the ramp, and (c) the normal force on the box, assuming no other forces act perpendicular to the ramp.
The angle between the weight and the perpendicular to the slope is the incline angle .
Step 1: Find the weight
, vertically downwards.
Step 2: Resolve the weight parallel to the ramp
down the slope.
The angle between the weight and the line perpendicular to the slope equals the incline angle, so the side of the triangle along the slope is opposite and uses sine.
Step 3: Resolve the weight perpendicular to the ramp
into the slope.
Step 4: Balance the forces perpendicular to the ramp
The box does not accelerate into or away from the ramp, so the net force perpendicular to it is zero: .
Try it yourself first, then check the working one step at a time.
Answer
(a) downwards (b) down the slope (c) , perpendicular to the ramp and away from it.
Method
Weight: .
Parallel to the slope: . Perpendicular: .
If nothing else acts perpendicular to the slope, .
Watch out for
Swapping sine and cosine. At the parallel component must be zero, and only .
Writing . On a slope the surface only has to cancel the perpendicular part of the weight.
A suitcase rests on a ramp inclined at . Calculate the component of its weight down the ramp, to two significant figures.
A box rests on a ramp. Which statement about the normal force on the box is correct?
Common mistake
Sine or cosine?
Students lose marks by swapping and . Test your choice with an extreme angle. On a flat surface () nothing pulls the box down the slope, and , so the parallel component must use sine. On a vertical wall () the whole weight acts along the surface, and .
The suggested investigation. Hold a trolley at rest on a ramp with a spring balance pulling parallel to the ramp. With negligible friction, the balance reading equals the parallel component of the weight, . Measure it at several angles. A graph of the reading against curves, but a graph against is a straight line through the origin with gradient .
Worked example
Finding a trolley's mass from incline data
A student holds a trolley at rest on a ramp with a spring balance pulling parallel to the ramp, and records the reading as the ramp angle is changed.
| (°) | 10 | 20 | 30 | 40 | 50 | 60 |
|---|---|---|---|---|---|---|
| (N) | 0.85 | 1.70 | 2.40 | 3.20 | 3.70 | 4.30 |
(a) Explain why the spring balance reading equals the component of the trolley's weight parallel to the ramp. (b) Determine the mass of the trolley from a graph of against .
against , with the line of best fit through the origin.
Step 1: Explain the reading
The trolley is at rest, so the net force along the ramp is zero. Assuming friction on the wheels is negligible, the only forces along the ramp are the spring balance pull up the slope and the parallel component of the weight down the slope, so they are equal: .
The normal force and the perpendicular component of the weight have no component along the ramp, so they do not affect the reading.
Step 2: Predict the shape of the graph
has the form with and , so the graph should be a straight line through the origin with gradient .
Plotting against rather than linearises the data, which makes the gradient meaningful.
Step 3: Find the gradient
The line of best fit through the origin has a gradient of about (for example, it passes through , and ).
Step 4: Find the mass
Try it yourself first, then check the working one step at a time.
Answer
(a) The trolley is in equilibrium along the ramp, so the balance cancels (friction neglected). (b) The gradient of against is about , so .
Method
Write the physics as a straight-line equation, .
Plot against and draw the line of best fit.
Read the gradient from two well-separated points on the line, not from data points.
Interpret the gradient using the physics.
Watch out for
Plotting against , which curves, so a gradient means nothing.
Using a single data point instead of the line of best fit.
Summary
Weight is a force, , in newtons and directed towards the Earth's centre. Mass, in kilograms, does not change from place to place.
The normal force is the perpendicular push of a surface. It adjusts to the situation and equals the weight only on a level surface with no other vertical forces or vertical acceleration.
On a slope the weight resolves into down the slope and into it.
With no other perpendicular forces, .
In the incline investigation, plotting the balance reading against gives a straight line of gradient .
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.