Lesson 8 of 12 · 20 min

Centripetal force

Identify the real force that pulls an object towards the centre of its circle, and solve problems with Fc=Fnet=mv2rF_c = F_{net} = \frac{mv^2}{r}, from cars on curves to roller coasters.

What you will be able to do

  • Describe centripetal force as the net force towards the centre of a circular path.
  • Identify the force or forces that supply it in common situations.
  • Solve problems with Fc=Fnet=mv2rF_c = F_{net} = \frac{mv^2}{r}, including the top and bottom of a vertical circle.
  • Analyse data from an investigation of horizontal circular motion on a string.

Whirl a ball on a string in a horizontal circle, then let go. The ball does not fly outwards. It flies off along the tangent, in a straight line, exactly as Newton's first law says an object with no net force should.

So while it was circling, something must have been pulling it towards the centre all the time. Here that was the tension in the string.

Key idea

Centripetal force

An object in uniform circular motion accelerates towards the centre, so by Newton's second law the net force on it points towards the centre:

Fc=Fnet=mv2rF_c = F_{net} = \frac{mv^2}{r}

The centripetal force is not a new kind of force. It is the name for whatever real force, or combination of forces, adds up to a net force towards the centre.

What supplies the centripetal force
SituationForce towards the centre
Ball whirled on a string on a smooth, horizontal tableTension in the string
Car on a flat curveSideways friction from the road on the tyres
Moon or satellite in orbitGravity
Car on a banked track at its design speedHorizontal component of the normal force
Rider at the bottom of a dipNormal force minus weight (FN−mgF_N - mg)
Car over the top of a humpWeight minus normal force (mg−FNmg - F_N)
Interactive

How big a force?

Double the speed. By what factor does the force needed change? Put the speed back and double the radius instead.

A 0.15 kg0.15\unit{kg} ball moves in a horizontal circle of radius 0.80 m0.80\unit{m} on a smooth table, tied to a string, at 5.0 m s−15.0\unit{m\,s^{-1}}. Calculate the tension in the string, to two significant figures.

in N

Give 2 significant figures.

Worked example

The friction a car needs on a flat curve

  • Simple familiar
  • Technology active

A 1200 kg1200\unit{kg} car travels around a flat (unbanked) curve of radius 45 m45\unit{m} at a constant 15 m s−115\unit{m\,s^{-1}}.

(a) Identify the force that provides the centripetal force. (b) Calculate its size.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Identify the real force (or the component of one) that points towards the centre.

  2. Set it equal to mv2r\frac{mv^2}{r} and solve.

Watch out for

  • Drawing an extra "centripetal force" alongside friction on the free-body diagram.

  • Saying the car slides outwards because of a centrifugal force. It slides because there is not enough force inwards.

A stone is whirled in a horizontal circle on a string. The string breaks when the stone is at the point furthest north of the centre, moving east. Viewed from above, which way does the stone move just after the string breaks?

Choose one answer

Vertical circles. At the bottom of a dip or a loop, the centre is above the rider, so the net force must point up: the seat pushes up harder than the weight pulls down, and the rider feels heavy. At the top of a hump the centre is below, so the net force points down: the road pushes up less than the weight, and the car feels light. If mv2r\frac{mv^2}{r} becomes larger than mgmg at the top of a hump, the road would have to pull down, which it cannot, so the car leaves the road at v=grv = \sqrt{gr}.

Worked example

The normal force at the bottom of a dip

  • Complex familiar
  • Technology active

A roller coaster car passes through the bottom of a dip shaped like part of a vertical circle of radius 24 m24\unit{m}. A 60 kg60\unit{kg} rider moves at 12 m s−112\unit{m\,s^{-1}} at the lowest point.

Calculate the normal force from the seat on the rider at the lowest point, and compare it with the rider's weight.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Draw the free-body diagram at the point of interest.

  2. Take the direction towards the centre as positive.

  3. Write Fnet=mv2rF_{net} = \frac{mv^2}{r} with each force signed, and solve.

Watch out for

  • Writing FN=mv2r=360 NF_N = \frac{mv^2}{r} = 360\unit{N}. The normal force has to cancel the weight as well as supply the net force.

  • Subtracting instead of adding: FN=mg−mv2rF_N = mg - \frac{mv^2}{r} is the top of a hump, where the centre is below.

Common mistake

There is no centrifugal force on the object

On a free-body diagram, draw only real forces: weight, normal force, tension, friction. Never add a separate "centripetal force" arrow, because that would count the same force twice, and never add an outward "centrifugal force". The outward lean you feel in a turning car is your body tending to continue in a straight line while the car turns underneath you.

Extension: banked curves

Racetracks, velodromes and many highway ramps are banked, tilted towards the centre of the curve. Then the normal force is not vertical: it tilts towards the centre, and its horizontal component can supply the centripetal force without any help from friction.

At the design speed, with the track banked at angle θ\theta:

FNcos⁡θ=mgFNsin⁡θ=mv2rF_N\cos\theta = mg \qquad F_N\sin\theta = \frac{mv^2}{r}

Dividing gives tan⁡θ=v2rg\tan\theta = \dfrac{v^2}{rg}. Faster traffic or tighter curves need steeper banking.

The suggested investigation. A rubber stopper (bung) on a string is whirled in a horizontal circle above your head. The string passes through a short tube you hold, and hangs down to a set of masses. The hanging weight MgMg sets the tension in the string, which supplies the centripetal force on the bung. Time 10 revolutions to find the period, then v=2πrTv = \frac{2\pi r}{T}.

The hanging weight MgMg provides the tension, and the tension provides the centripetal force on the bung.

In the investigation, a 0.020 kg0.020\unit{kg} bung circles at a radius of 0.50 m0.50\unit{m} while the hanging weight is 0.98 N0.98\unit{N}. Assuming the string is horizontal and the tube is frictionless, calculate the speed of the bung, to two significant figures.

in m s -1

Give 2 significant figures.

Note

Improving the investigation

Plot the hanging weight FF against v2v^2. The theory F=(mr)v2F = \left(\frac{m}{r}\right)v^2 predicts a straight line through the origin with gradient mr\frac{m}{r}. Typical systematic errors: friction between the string and the tube (the tension at the bung is less than MgMg), the string sloping below the horizontal, and the radius drifting during timing. A small marker clip on the string just below the tube helps keep the radius constant, and timing 10 or 20 revolutions reduces the timing uncertainty.

Exam tip

Name the force

Questions often start "identify the force that provides the centripetal force". Name a real force and say where it acts: "the friction force of the road on the tyres, directed towards the centre of the curve". Then write Fnet=mv2rF_{net} = \frac{mv^2}{r} with the forces along the radius, signed towards the centre.

Summary

  • The centripetal force is the net force towards the centre, Fc=Fnet=mv2rF_c = F_{net} = \frac{mv^2}{r}.

  • It is supplied by real forces: tension, friction, gravity, a normal force, or a combination.

  • When the supply is removed, the object moves off along the tangent, not outwards.

  • At the bottom of a dip FN−mg=mv2rF_N - mg = \frac{mv^2}{r}; at the top of a hump mg−FN=mv2rmg - F_N = \frac{mv^2}{r}.

  • In the bung investigation the hanging weight sets the tension, and a graph of FF against v2v^2 has gradient mr\frac{m}{r}.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 8 of 120% read

Save your progress with a free account