Lesson 7 of 8 · 17 min
Volume and capacity of prisms and cylinders
Calculate the volume of any prism or cylinder with , convert between cubic units, and turn volumes into capacities in millilitres, litres and kilolitres.
What you will be able to do
- Use for any prism, including triangular and trapezoidal prisms lying on their side.
- Use for cylinders.
- Convert between cubic units and capacities: and .
- Work backwards from a volume or capacity to a missing dimension.
Volume is the amount of space inside a solid, counted in unit cubes. A prism has the same cross-section all the way through, like a loaf of bread you could slice into identical pieces. So its volume is the area of one slice times the length of the stack:
is the area of the cross-section and is the perpendicular distance between the two identical ends. For a prism lying on its side, like a tent or a chocolate box, is its length.
Every slice parallel to the shaded end is the same triangle, so : the area of the triangle times the length.
Key idea
Volume of a prism
A cylinder is a prism with a circular cross-section, so and
Worked example
How much water fills a pool with a sloping floor?
A swimming pool is 25 m long and 10 m wide. Its floor slopes evenly from a depth of 1.0 m at the shallow end to 2.0 m at the deep end. Calculate how many kilolitres of water it holds when full.
Side view (not to scale). The pool is 10 m wide.
Step 1: Find the prism
Seen from the side, the water is a trapezium, and it is the same all the way across the 10 m width. So the water is a prism lying on its side, with a trapezium cross-section and a "height" of 10 m.
A prism needs a constant cross-section. Every slice parallel to the side wall is the same trapezium.
Step 2: Area of the cross-section
The parallel sides are the two depths, 1.0 m and 2.0 m, and the distance between them is the 25 m length:
Step 3: Volume
Step 4: Convert to kilolitres
, so the pool holds 375 kL, which is 375 000 L.
Try it yourself first, then check the working one step at a time.
Answer
The pool holds 375 kL of water.
Method
Find the face that stays the same through the solid; that is the cross-section.
Multiply its area by the distance through the solid.
Convert with .
Watch out for
Using one depth for the whole pool: is too much.
Capacity is how much a container holds. The link between volume and capacity is exact: a cube 1 cm on each side holds exactly 1 mL.
| Volume | Capacity |
|---|---|
| 1 mL | |
| 1 L | |
| 1000 L = 1 kL | |
| 1 ML (megalitre) |
Converting between cubic units cubes the length factor: . That is why a cubic metre holds 1000 L: L.
A trailer load of sand has a volume of . What is that in litres?
A cylindrical rainwater tank has an internal radius of 1.1 m and a height of 2.1 m. Calculate its capacity in litres, correct to the nearest litre.
Sometimes you know the capacity you need and must find a dimension. Substitute what you know, then solve for the unknown. A tank that must hold 10 000 L () with a radius of 1.2 m needs
The horizontal axis is the height in metres and the vertical axis is the volume in kilolitres (). Every extra metre of height adds the same volume, , so the graph is a straight line.
Worked example
How much does the tank level rise after rain?
A shed roof covers a rectangle 12 m by 8 m when seen from above. All the rain that falls on it runs into a cylindrical tank with an internal diameter of 2.2 m. During a storm, 25 mm of rain falls.
(a) How many litres of water run off the roof?
(b) By how much does the water level in the tank rise? Give your answer to the nearest centimetre.
Step 1: Model the rain as a prism
The rain that lands on the roof would make a layer 25 mm deep over a 12 m by 8 m rectangle. That layer is a rectangular prism.
Rainfall is measured as the depth of water that would collect on flat ground, so the volume is the area it falls on times that depth.
Step 2: Convert to one unit
Step 3: Volume of rain
L
Step 4: Set up the tank volume
In the tank, the same forms a cylinder of radius m and unknown height :
Step 5: Solve for the rise
m
Step 6: Check that it makes sense
The roof covers and the tank floor is about , about 25 times smaller. So the water should stand about 25 times deeper than the rain: , close to 63 cm.
Try it yourself first, then check the working one step at a time.
Answer
(a) 2400 L. (b) The water level rises by about 63 cm.
Method
Volume of rain = catchment area × rainfall depth, in the same units.
L.
For the rise, set equal to the volume and solve for .
Watch out for
Multiplying by 25 instead of 0.025: convert millimetres of rain to metres first.
Using the diameter, 2.2 m, as the radius.
Common mistake
One unit for every length
Convert all lengths to the same unit before you multiply. A pool 25 m by 10 m and 120 cm deep has , not . For litres, work in centimetres (so ) or in metres (so ), but don't mix them.
Exam tip
Volume or capacity?
Read which one the question wants. "How much water" or "capacity" usually means litres or kilolitres; "volume of concrete" means cubic metres. Show the conversion step, such as " L".
Summary
Prism: , the cross-section area times the perpendicular distance between the ends.
Cylinder: .
Cubic units cube the length factor: .
and .
To find a missing dimension, substitute the volume and solve for the unknown.
Finished the lesson?
Try the 2 quick checks above and the lesson completes itself, or mark it complete now.