Lesson 3 of 8 · 16 min

Perimeter, circumference and arcs

Calculate the perimeter of polygons, circles, sectors and composite shapes, finding missing sides and converting units of length where needed.

What you will be able to do

  • Find the perimeter of rectangles, triangles, parallelograms, trapeziums and composite shapes, including missing sides.
  • Calculate the circumference of a circle, C=2πrC = 2\pi r.
  • Calculate arc lengths and the perimeter of a sector, P=2r+θ180πrP = 2r + \frac{\theta}{180}\pi r.
  • Convert between millimetres, centimetres, metres and kilometres.

Perimeter is the distance around the outside of a shape. It is what you pay for when you buy fencing, garden edging, skirting board or the trim around a window. For a shape with straight sides it is addition, as long as you know every side. Curved edges need π\pi.

Definition

Perimeter

The perimeter PP of a shape is the total length of its boundary. It is a length, so its unit is mm, cm, m or km.

Rectangle: P=2(l+w)P = 2(l + w). Parallelogram: P=2(a+b)P = 2(a + b) for sides aa and bb. Triangles and trapeziums: add the sides, using Pythagoras if a slanted side is missing.

Two sides are missing. The step's horizontal edge is 10−6=410 - 6 = 4 m and its vertical edge is 7−4=37 - 4 = 3 m.

First find the missing sides. The horizontal edges along the top must add up to the full 10 m width, so the step's horizontal edge is 10−6=410 - 6 = 4 m. The vertical edges on the right must add up to the full 7 m height, so the step's vertical edge is 7−4=37 - 4 = 3 m. Then add all six sides:

P=10+4+4+3+6+7=34 mP = 10 + 4 + 4 + 3 + 6 + 7 = 34\text{ m}

That matches the perimeter of the full 10 m by 7 m rectangle, 2(10+7)=342(10 + 7) = 34 m. When a corner is cut out like this, the shortcut always works, but cutting out a corner does change the area.

Converting units of length. To a smaller unit, multiply; to a larger unit, divide.
FromToDo this
kmm× 1000
mcm× 100
cmmm× 10
mmm× 1000

Every circle's circumference is a little more than three times its diameter. The exact ratio is the number π=3.14159…\pi = 3.14159\ldots, so

C=πd=2πrC = \pi d = 2\pi r

where rr is the radius and d=2rd = 2r is the diameter. Use the π\pi key on your calculator rather than 3.14.

A bicycle wheel has a diameter of 66 cm. How far does the bike travel in one full turn of the wheel? Give your answer in metres, correct to two decimal places.

in m

Round to 2 decimal places.

A sector is bounded by two radii and an arc, so its perimeter is r+r+arcr + r + \text{arc}.

Key idea

Arcs and sectors

An arc with central angle θ\theta is the fraction θ360\frac{\theta}{360} of the whole circumference:

l=θ360×2πrl = \frac{\theta}{360} \times 2\pi r

A sector's perimeter is the arc plus two radii. Since θ360×2πr=θ180πr\frac{\theta}{360} \times 2\pi r = \frac{\theta}{180}\pi r, the formula book writes it as

P=2r+θ180πrP = 2r + \frac{\theta}{180}\pi r

with θ\theta in degrees.

Worked example

Edging for a sector-shaped garden bed

  • Simple familiar
  • Technology active

A corner garden bed is a sector of a circle with radius 2.4 m and central angle 110°. Calculate the length of edging needed to go all the way around it, correct to two decimal places.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. The perimeter of a sector is two radii plus the arc.

  2. Arc =θ360×2πr=θ180πr= \frac{\theta}{360} \times 2\pi r = \frac{\theta}{180}\pi r.

Watch out for

  • Giving only the arc, 4.61 m, and forgetting the two straight edges.

The top of a slice of round cake is a sector with radius 12 cm and central angle 50°. Calculate the perimeter of the top of the slice, correct to one decimal place.

in cm

Round to 1 decimal place.

Composite shapes with curves combine both ideas. Add the straight edges, then add each curved part as a fraction of a circle. A semicircle's curved edge is half a circumference: 12×2πr=πr\frac{1}{2} \times 2\pi r = \pi r.

Worked example

How long is a running track?

  • Complex familiar
  • Technology active

A standard athletics track has two straights, each 84.39 m long, joined by two semicircular ends. The inside kerb of each end is a semicircle of radius 36.5 m.

(a) Calculate the distance around the inside kerb, correct to two decimal places.

(b) Races are measured along a line 30 cm out from the kerb. Show that this line is 400 m long, to the nearest metre.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Split the boundary into straight parts and curved parts.

  2. Two semicircles with the same radius make one full circle.

  3. Convert to one unit before adding.

Watch out for

  • Counting each semicircle as a full circle.

  • Adding 30 cm as if it were 30 m.

A window is a rectangle 1.2 m wide and 1.5 m high with a semicircle on top, as shown. Calculate the length of trim needed to go around the outside of the window, correct to two decimal places.

in m

Round to 2 decimal places.

Common mistake

Radius or diameter?

C=2πrC = 2\pi r uses the radius. If you are given the diameter, halve it, or use C=πdC = \pi d instead. Putting the diameter into 2πr2\pi r doubles the answer.

Exam tip

One unit before you add

Convert every length to the same unit before adding. Garden edging of 3.5 m plus 80 cm is 3.5+0.8=4.33.5 + 0.8 = 4.3 m, not 3.5+803.5 + 80. Give the unit with your answer, and round only at the end.

Summary

  • The perimeter is the total length of the outside boundary.

  • Find missing sides first. On shapes with only horizontal and vertical edges, the pieces of each side add to the full width or height.

  • Circumference: C=2πr=πdC = 2\pi r = \pi d.

  • An arc is θ360\frac{\theta}{360} of the circumference, and a sector's perimeter is P=2r+θ180πrP = 2r + \frac{\theta}{180}\pi r.

  • Count only the outside edges of a composite shape, and convert to one unit before adding.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 80% read

Save your progress with a free account