General Mathematics · Unit 1 · Topic 2

Shape and measurement

Use Pythagoras' theorem in two and three dimensions, and calculate perimeters, areas, surface areas, volumes and capacities of everyday shapes and solids, including composites.

  • 8 lessons
  • 2 h 10 min of lessons
  • 15 worked examples
  • 12 hours in the syllabus
0 of 8

Start here

Pythagoras' theorem

Lesson 1 of 8 · 15 min

Start the topic

Lessons

8
  1. Pythagoras' theorem (up next)

    Find any side of a right-angled triangle from the other two, and use Pythagoras' theorem to solve practical problems such as ladders, shortcuts and screen sizes.

  2. Pythagoras in three dimensions

    Find lengths inside solids, such as the diagonal of a box, the height of a pyramid or the slant height of a cone, by spotting the right-angled triangles hidden in them.

  3. Perimeter, circumference and arcs

    Calculate the perimeter of polygons, circles, sectors and composite shapes, finding missing sides and converting units of length where needed.

  4. Area of plane shapes

    Calculate the area of rectangles, triangles, parallelograms, trapeziums, circles and sectors using the perpendicular height, and convert between units of area.

  5. Composite shapes

    Find the area and perimeter of composite shapes by splitting them into standard shapes, adding or subtracting the pieces, and using the result to cost a job.

  6. Surface area

    Calculate the surface area of prisms, cylinders, pyramids, cones, spheres and composite solids by adding the areas of every surface you could paint.

  7. Volume and capacity of prisms and cylinders

    Calculate the volume of any prism or cylinder with V=AhV = Ah, convert between cubic units, and turn volumes into capacities in millilitres, litres and kilolitres.

  8. Volume of pyramids, cones and spheres

    Calculate the volumes and capacities of pyramids, cones, spheres, hemispheres and composite solids, and use them to solve multi-step practical problems.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

How much fencing does a paddock need? How many litres does a rainwater tank hold? How much paint will cover a shed? This topic gives you the tools for questions like these: Pythagoras' theorem for lengths you can't measure directly, and the perimeter, area, surface area and volume of every standard shape and solid.

Real jobs rarely involve a single standard shape, so you'll also learn to split composite shapes into pieces you know, and to turn a volume into a capacity in litres. Every formula you need is in the QCAA formula book. The marks are in choosing the right one, substituting the right measurements (the radius, the perpendicular height, matching units) and answering the question that was actually asked.

Before you start

  • The area of a rectangle and the volume of a rectangular prism (Years 7 and 8).
  • Converting between millimetres, centimetres, metres and kilometres.
  • Squaring, square roots and the π\pi key on a scientific calculator.
  • Rounding to a given number of decimal places.

What QCAA says you need to know6 dot points

Pythagoras' theorem

3 hours
  • Understand and use Pythagoras' theorem to solve practical problems in two dimensions and simple applications in three dimensions. c2=a2+b2c^2 = a^2 + b^2 where cc is length of the hypotenuse and aa and bb are lengths of the two perpendicular sidesLessonsPythagoras' theoremPythagoras in three dimensionsSurface area

Mensuration

9 hours
  • Calculate perimeters, PP, of standard two-dimensional objects in practical situations, including circles, sectors, triangles, rectangles, trapeziums, parallelograms and composites. Circle: C=2πrC = 2\pi r where CC is circumference and rr is radius; sector: P=2r+θ180πrP = 2r + \frac{\theta}{180}\pi r where θ\theta is central angle and rr is radiusLessonsPerimeter, circumference and arcsComposite shapes
  • Calculate areas, AA, of standard two-dimensional objects in practical situations, including circles, sectors of circles, triangles, rectangles, parallelograms, trapeziums and composites. Circle: A=πr2A = \pi r^2 where rr is radius; sector: A=θ360πr2A = \frac{\theta}{360}\pi r^2 where θ\theta is central angle and rr is radius; triangle: A=12bhA = \frac{1}{2}bh where bb is base length and hh is perpendicular height; parallelogram: A=bhA = bh where bb is base length and hh is perpendicular height; trapezium: A=12(a+b)hA = \frac{1}{2}(a + b)h where aa and bb are parallel lengths and hh is perpendicular heightLessonsArea of plane shapesComposite shapes
  • Calculate surface areas, SS, of standard three-dimensional objects in practical situations, including rectangular prisms, cylinders, pyramids, cones, spheres and composites. Cylinder: S=2πrh+2πr2S = 2\pi rh + 2\pi r^2 where rr is radius and hh is perpendicular height; cone: S=πrs+πr2S = \pi rs + \pi r^2 where rr is radius and ss is slant height; sphere: S=4πr2S = 4\pi r^2 where rr is radiusLessonSurface area
  • Calculate volumes, VV, and capacities of standard three-dimensional objects in practical situations, including rectangular prisms, cylinders, pyramids, cones, spheres and composites. Prism: V=AhV = Ah where AA is base area and hh is perpendicular height; cylinder: V=πr2hV = \pi r^2 h where rr is radius and hh is perpendicular height; pyramid: V=13AhV = \frac{1}{3}Ah where AA is base area and hh is perpendicular height; cone: V=13πr2hV = \frac{1}{3}\pi r^2 h where rr is radius and hh is perpendicular height; sphere: V=43πr3V = \frac{4}{3}\pi r^3 where rr is radiusLessonsVolume and capacity of prisms and cylindersVolume of pyramids, cones and spheres
  • Solve practical problems involving shape and measurement.LessonsPerimeter, circumference and arcsComposite shapesVolume and capacity of prisms and cylindersVolume of pyramids, cones and spheres

Subject matter from the General Mathematics General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Pythagoras' theorem in 2D

    Find the hypotenuse or a shorter side of a right-angled triangle, and use it to solve practical problems.

    Practise
  • Pythagoras in 3D

    Find the right-angled triangle inside a solid to get space diagonals, perpendicular heights and slant heights.

    Practise
  • Perimeter of shapes

    Add up the boundary of polygons and composite shapes, finding missing sides first.

    Practise
  • Circles and sectors

    Circumference and area of circles, and the arc length, perimeter and area of sectors.

    Practise
  • Area of plane shapes

    Rectangles, triangles, parallelograms and trapeziums, always with the perpendicular height.

    Practise
  • Composite areas

    Split a shape into standard pieces, then add or subtract their areas.

    Practise
  • Surface area of solids

    Prisms, cylinders, pyramids, cones, spheres and composite solids, including open containers.

    Practise
  • Volume of prisms and cylinders

    Use V = Ah for any prism, including cylinders and prisms lying on their side.

    Practise
  • Volume of pyramids, cones and spheres

    Pyramids and cones are one third of the matching prism; spheres and hemispheres; composite solids.

    Practise
  • Units and capacity

    Convert units of length, area and volume, and turn volumes into capacities in mL, L and kL.

    Practise
  • Measurement in context

    Multi-step practical problems with costs, materials, filling times and checks of reasonableness.

    Practise

Worked examples15

All 15

Common mistakes

Adding when you should subtract

To find a shorter side, subtract: a2=c2−b2a^2 = c^2 - b^2. If your "shorter" side comes out longer than the hypotenuse, you added.

Using a slanted side as the height

Area and volume formulas use the perpendicular height, measured at right angles to the base. A slanted side of a parallelogram, trapezium or triangle is not the height.

Diameter instead of radius

Circle, sphere, cylinder and cone formulas use the radius. Halve the diameter first. Using the diameter makes an area four times too big and a sphere's volume eight times too big.

Slant height or perpendicular height

For a cone, surface area uses the slant height ss and volume uses the perpendicular height hh. Use Pythagoras if you are given the other one.

Converting area or volume units with the length factor

1 m=100 cm1\text{ m} = 100\text{ cm}, but 1 m2=10 000 cm21\text{ m}^2 = 10\,000\text{ cm}^2 and 1 m3=1 000 000 cm31\text{ m}^3 = 1\,000\,000\text{ cm}^3. Square or cube the length factor.

Mixing units in one calculation

Convert every length to the same unit before you multiply. A pool 25 m long and 120 cm deep needs 1.2 m, not 120.

Forgetting the third

A pyramid or cone holds one third of the prism or cylinder with the same base and height: V=13AhV = \frac{1}{3}Ah.

Counting faces that are not there

An open container has no lid. Where two solids are joined, the faces in contact are hidden and are not part of the surface area.

Counting inside edges in a perimeter

The perimeter is only the outside boundary. The line where two pieces of a composite shape meet is not part of it.

Rounding too early

Keep the full calculator value (use ANS or memory) until the final answer. Rounding a diagonal or a slant height early can change the last decimal place.

Exam tips

  1. Write the formula, substitute the numbers, then evaluate. Markers award method marks for a correct substitution even if the final answer slips.

  2. Draw a diagram and mark the right angle. In 3D problems, redraw the right-angled triangle you are using flat on the page.

  3. State units, and make them squared for area and cubed for volume. A capacity question wants litres or kilolitres.

  4. Answer the question asked: if it asks for tins of paint, bags of mulch or rolls of turf, round up to a whole number and say why.

  5. Check reasonableness. The hypotenuse is the longest side; a cone is a third of its cylinder; estimating with π≈3\pi \approx 3 catches calculator slips.

  6. In the formula book the sector angle θ\theta is in degrees: P=2r+θ180πrP = 2r + \frac{\theta}{180}\pi r and A=θ360πr2A = \frac{\theta}{360}\pi r^2.

  7. For "justify" or "evaluate", compare your calculated value with the requirement and finish with a clear statement, such as "1.10 m < 1.12 m, so the rod fits".

  8. Use the π\pi key, not 3.14, unless the question tells you otherwise.

Where this shows up

  • Building and construction: setting out square corners with a 3-4-5 triangle, roof pitches, concrete slabs and footings.

  • Landscaping: turf, mulch, pavers, garden edging and retaining walls.

  • Water: rainwater tanks, pools, troughs, irrigation channels and roof catchment.

  • Packaging and manufacturing: cans, cartons, labels and how much material a container needs.

  • Painting, tiling and flooring quotes for homes and businesses.

  • Sport: athletics tracks, field markings and court surfaces.

  • Farming: fencing paddocks, grain silos, hay sheds and water troughs.

Save your progress with a free account