Lesson 4 of 8 · 16 min

Area of plane shapes

Calculate the area of rectangles, triangles, parallelograms, trapeziums, circles and sectors using the perpendicular height, and convert between units of area.

What you will be able to do

  • Calculate the area of rectangles, triangles, parallelograms and trapeziums using the perpendicular height.
  • Calculate the area of circles, A=πr2A = \pi r^2, and of sectors, A=θ360πr2A = \frac{\theta}{360}\pi r^2.
  • Convert between mm2\text{mm}^2, cm2\text{cm}^2, m2\text{m}^2, hectares and km2\text{km}^2.

Area measures how much flat surface a shape covers: the turf for a lawn, the tiles for a floor, the paint for a wall. It is counted in squares. A rectangle 5 m by 3 m holds 3 rows of 5 one-metre squares, so its area is 5×3=15 m25 \times 3 = 15\text{ m}^2.

Every other area formula in this lesson grows out of the rectangle.

Slide the shaded triangle from one end to the other and the parallelogram becomes a rectangle bb by hh. So A=bhA = bh, with the perpendicular height, not the slanted side.

Area formulas. Every hh is a perpendicular height, measured at right angles to the base.
ShapeAreaWhere it comes from
RectangleA=lwA = lwRows of unit squares
ParallelogramA=bhA = bhSlide a triangle across to make a rectangle
TriangleA=12bhA = \frac{1}{2}bhHalf of a parallelogram
TrapeziumA=12(a+b)hA = \frac{1}{2}(a + b)hThe average of the parallel sides, times the height
CircleA=πr2A = \pi r^2Radius squared, times π\pi
SectorA=θ360πr2A = \frac{\theta}{360}\pi r^2A fraction of the circle

Key idea

Always the perpendicular height

In every formula with hh, the height is measured at right angles to the base. In a triangle with an obtuse angle, the height can fall outside the triangle: extend the base and measure to it. Slanted sides are for perimeter, never for area.

Calculate the area of the parallelogram.

Choose one answer

Worked example

Area of a block of land in hectares

  • Simple familiar

A block of land is a trapezium. Its two parallel boundaries are 32 m and 45 m long, and they are 28 m apart. Calculate its area in square metres and in hectares.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Add the parallel sides, halve, then multiply by the perpendicular height.

  2. Divide square metres by 10 000 to get hectares.

Watch out for

  • Using a slanted boundary as the height.

  • Dividing by 100 or 1000 instead of 10 000 for hectares.

For circles, the area depends on the square of the radius:

A=πr2A = \pi r^2

A sector with central angle θ\theta is the fraction θ360\frac{\theta}{360} of the circle, so its area is A=θ360πr2A = \frac{\theta}{360}\pi r^2. A semicircle is 180360=12\frac{180}{360} = \frac{1}{2} of a circle, and a quadrant is 90360=14\frac{90}{360} = \frac{1}{4}.

A garden sprinkler sprays water 5 m and turns back and forth through 120°, watering a sector of lawn. Calculate the area it waters, correct to two decimal places.

in m 2

Round to 2 decimal places.

Area units are squares, so converting them squares the length factor. A square 1 cm wide is 10 mm wide, so it holds 10×10=10010 \times 10 = 100 squares of 1 mm21\text{ mm}^2.

1 cm2=10 mm×10 mm=100 mm21\text{ cm}^2 = 10\text{ mm} \times 10\text{ mm} = 100\text{ mm}^2. In the same way, 1 m2=100 cm×100 cm=10 000 cm21\text{ m}^2 = 100\text{ cm} \times 100\text{ cm} = 10\,000\text{ cm}^2.

Converting units of area.
FromToDo thisBecause
cm2\text{cm}^2mm2\text{mm}^2× 100102=10010^2 = 100
m2\text{m}^2cm2\text{cm}^2× 10 0001002=10 000100^2 = 10\,000
hectares (ha)m2\text{m}^2× 10 0001 ha is a square 100 m by 100 m
km2\text{km}^2m2\text{m}^2× 1 000 00010002=1 000 0001000^2 = 1\,000\,000
km2\text{km}^2ha× 1001 000 000÷10 000=1001\,000\,000 \div 10\,000 = 100

A rug has an area of 0.8 m20.8\text{ m}^2. What is its area in square centimetres?

in cm 2

Common mistake

The length factor is not the area factor

1 m=100 cm1\text{ m} = 100\text{ cm}, but 1 m2=10 000 cm21\text{ m}^2 = 10\,000\text{ cm}^2. If a question gives lengths in centimetres and wants an answer in square metres, the safest move is to convert the lengths to metres first, then calculate.

Exam tip

Square units

Area answers need square units: cm2\text{cm}^2, m2\text{m}^2 or hectares. A correct number with "m" written instead of "m2\text{m}^2" can cost you a communication mark.

Summary

  • Area counts unit squares: rectangle lwlw, parallelogram bhbh, triangle 12bh\frac{1}{2}bh, trapezium 12(a+b)h\frac{1}{2}(a + b)h.

  • The height is always perpendicular to the base. Slanted sides are for perimeter, not area.

  • Circle A=πr2A = \pi r^2; sector A=θ360πr2A = \frac{\theta}{360}\pi r^2.

  • To convert area units, square the length factor: 1 m2=10 000 cm21\text{ m}^2 = 10\,000\text{ cm}^2 and 1 ha=10 000 m21\text{ ha} = 10\,000\text{ m}^2.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 4 of 80% read

Save your progress with a free account