Lesson 5 of 8 · 16 min

Composite shapes

Find the area and perimeter of composite shapes by splitting them into standard shapes, adding or subtracting the pieces, and using the result to cost a job.

What you will be able to do

  • Split a composite shape into rectangles, triangles, trapeziums, circles and sectors.
  • Find a composite area by adding pieces or subtracting a hole.
  • Find the perimeter of a composite shape using only its outside edges.
  • Use areas to cost materials, rounding up when you buy whole items.

Backyards, pools, rooms and garden beds are rarely one standard shape. To find their area, split them into shapes you know, work out each piece, then combine the pieces.

There are two ways to combine them. Add pieces that sit side by side, such as a rectangle with a semicircle on the end. Subtract a piece that has been cut out, such as a pool in a lawn or a window in a wall.

Split along the dashed line: a 6 m by 4 m rectangle plus a semicircle of radius 2 m.

Working with a composite shape

  1. Sketch and label

    Mark every length you know on a diagram.

  2. Find missing lengths

    Use the lengths you have, such as an overall width minus a part, half a width for a radius, or Pythagoras for a sloping edge.

  3. Split or subtract

    Decide whether the shape is pieces added together, a big shape with a hole, or both.

  4. Calculate each piece

    Label each area with its formula, such as "rectangle: 6×4=24 m26 \times 4 = 24\text{ m}^2".

  5. Combine and answer

    Add or subtract, then answer the question that was asked, with units.

Worked example

Area and edging of a lawn with a curved end

  • Complex familiar
  • Technology active

A lawn is a rectangle 6 m long and 4 m wide with a semicircle on one of its short ends. Calculate (a) its area and (b) the length of edging around its outside, each correct to two decimal places.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Split into a rectangle and a semicircle; the radius is half the end width.

  2. The area adds both pieces. The perimeter uses outside edges only.

Watch out for

  • Using 4 m as the radius of the semicircle.

  • Including the dashed join in the perimeter.

Calculate the floor area of the L-shaped room.

in m 2

Adding pieces

A shed's end wall is a rectangle with a triangle on top.

A=rectangle+triangleA = \text{rectangle} + \text{triangle}

Subtracting a hole

A path around a pool is the big rectangle (pool and path together) with the pool taken out.

A=outer−innerA = \text{outer} - \text{inner}

Worked example

Cost of paving a path around a pool

  • Complex familiar
  • Technology active

A rectangular pool is 10 m long and 4 m wide. A paved path 1.5 m wide runs all the way around it. Pavers cost $62 per square metre, laid. Calculate the cost of paving the path.

3 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Outer dimensions are the inner dimensions plus two path widths.

  2. Path area = outer area − inner area.

  3. Multiply the area by the price per square metre.

Watch out for

  • Adding the path width only once: 11.5×5.5−40=23.25 m211.5 \times 5.5 - 40 = 23.25\text{ m}^2 is far too small.

A circular pond of radius 3 m is surrounded by a gravel path 1 m wide. Calculate the area of the path, correct to two decimal places.

in m 2

Round to 2 decimal places.

Common mistake

Inside edges are not perimeter

When two pieces are joined, the edge between them is inside the composite shape, so it is not part of the perimeter. In the lawn above, the dashed 4 m line helps you find the area, but no edging goes along it.

Exam tip

Answer the real question

The area is often just a step. If the question asks how many bags, rolls or tins to buy, divide, then round up to a whole number and say so: "15.3 rolls, so buy 16". If it asks for a cost, multiply by the price and give dollars and cents.

Summary

  • Split a composite shape into standard shapes, or start with a big shape and subtract the hole.

  • Find missing lengths from the ones you have before you calculate.

  • The perimeter uses only the outside boundary; joins between pieces are not included.

  • Finish with what the question asks for: a cost, or a whole number of items rounded up.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 80% read

Save your progress with a free account