General Mathematics · Unit 1 · Topic 3

Similarity and scale

Recognise similar figures and similar triangles, use scale factors to find unknown lengths, read maps and building plans with ratio scales, and scale areas by k2k^2 and volumes and capacities by k3k^3.

  • 7 lessons
  • 1 h 55 min of lessons
  • 12 worked examples
  • 8 hours in the syllabus
0 of 7

Start here

What makes two figures similar

Lesson 1 of 7 · 14 min

Start the topic

Lessons

7
  1. What makes two figures similar (up next)

    Decide whether two figures are similar by checking corresponding angles and the ratios of corresponding sides, and find the scale factor between them.

  2. Similar triangles and the four tests

    Show that two triangles are similar using the AAA, SSS, SAS or RHS condition, and give the evidence a marker wants to see.

  3. Finding unknown lengths with similar figures

    Use a scale factor to find unknown lengths in similar figures, including overlapping triangles and heights found from shadows.

  4. Scale drawings and ratio scales

    Write a scale as a ratio 1 : n, and use it to convert between lengths on a scale drawing or model and real lengths.

  5. Maps and building plans

    Take measurements from maps and building plans, convert them to real distances and areas, and use them to work out travel times and costs.

  6. Areas of similar figures

    Use k2k^2 to find the areas of similar figures and the surface areas of similar solids, and work back from an area ratio to the scale factor.

  7. Volumes and capacities of similar solids

    Use k3k^3 to find the volumes and capacities of similar solids, and move between length, surface area and volume ratios.

  8. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

A 1:18 model car, a house plan drawn at 1:100, a topographic map at 1:25 000 and a photo enlarged to poster size all have one thing in common: every length has been multiplied by the same number. Figures related like that are similar. They have the same shape, with the same angles, but a different size.

In this topic you will learn what it takes for two figures to be similar, and the four quick tests for similar triangles. You will use a scale factor kk to find lengths you can't measure directly, such as the height of a tree from its shadow or the width of a river. You will write and use ratio scales such as 1:2501 : 250 to move between a scale drawing, a map or a building plan and the real thing.

Then comes the surprise: when lengths are multiplied by kk, areas are multiplied by k2k^2 and volumes and capacities by k3k^3. Double the size of a water tank and it holds eight times as much. That one idea explains why a large pizza is often the better buy, and why a model of a dam holds only a few litres.

You can use a calculator throughout this topic. The skill is choosing the right scale factor, keeping the units straight and checking that the answer makes sense.

Before you start

Builds on Shape and measurement.

  • Converting between units of length (mm, cm, m, km), area and capacity.
  • Angle sum of a triangle is 180°, and angles formed by parallel lines (corresponding and alternate angles).
  • Simplifying ratios and solving simple equations such as x12=58\dfrac{x}{12} = \dfrac{5}{8}.
  • Squares, square roots, cubes and cube roots on a calculator.

What QCAA says you need to know4 dot points

Similar figures and scale factors

8 hours

Subject matter from the General Mathematics General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Recognising similar figures

    Decide whether two figures are similar by checking that corresponding angles are equal and corresponding sides are in the same ratio.

    Practise
  • Tests for similar triangles

    Show that two triangles are similar with the AAA, SSS, SAS or RHS condition, and match their corresponding sides.

    Practise
  • Finding a scale factor

    Find the scale factor between two similar figures from a pair of corresponding lengths, and say whether it is an enlargement or a reduction.

    Practise
  • Finding unknown lengths

    Use a scale factor to find unknown lengths in similar figures, including overlapping triangles, shadows and indirect measurement.

    Practise
  • Ratio scales and scale drawings

    Write a scale as a ratio 1 : n and convert between lengths on a scale drawing or model and real lengths.

    Practise
  • Maps and building plans

    Take measurements from maps and building plans to find real distances, areas, times and costs.

    Practise
  • Areas of similar figures

    Use k² to find areas of similar figures and surface areas of similar solids, and find k from an area ratio.

    Practise
  • Volumes and capacities

    Use k³ to find volumes and capacities of similar solids, and find k from a volume or surface area ratio.

    Practise

Worked examples12

All 12

Common mistakes

Using angles alone or sides alone for polygons

For figures other than triangles you need both conditions. A 4 cm × 3 cm rectangle and a 4 cm square have equal angles but are not similar; a square and a rhombus with the same side length have proportional sides but are not similar.

Matching the wrong sides

Corresponding sides sit opposite equal angles. Match shortest with shortest and longest with longest, or follow the letter order in △ABC∼△PQR\triangle ABC \sim \triangle PQR (AB↔PQAB \leftrightarrow PQ, BC↔QRBC \leftrightarrow QR, AC↔PRAC \leftrightarrow PR).

Using the extra piece in overlapping triangles

When a line parallel to one side cuts off a small triangle, the big triangle's side is the whole length. If AD=4AD = 4 and DB=6DB = 6, the big triangle's side is AB=10AB = 10, not 6.

Turning the scale factor upside down

Put the figure you are going to on top: k=imageoriginalk = \dfrac{\text{image}}{\text{original}}. A reduction must make lengths smaller, so check that k<1k < 1 when the image is smaller.

Mixing units in a scale

A scale 1:n1 : n has no units because both sides use the same unit. "1 cm represents 5 m" is 1:5001 : 500, not 1:51 : 5, because 5 m=500 cm5\text{ m} = 500\text{ cm}.

Multiplying areas by kk instead of k2k^2

Doubling every length makes an area 4 times as big, not 2 times. The same goes for maps: an area on a 1:25 0001 : 25\,000 map is multiplied by 25 000225\,000^2. Convert the map lengths to real lengths first and the problem disappears.

Multiplying volumes by k2k^2 or kk

Volumes and capacities scale by k3k^3. A tank 1.5 times as tall (and similar) holds 1.53=3.3751.5^3 = 3.375 times as much.

Finding k from areas or volumes without a root

If the areas are in the ratio 1 : 9, the lengths are in the ratio 1 : 3 (9=3\sqrt{9} = 3). If the volumes are in the ratio 1 : 8, the lengths are in the ratio 1 : 2 (83=2\sqrt[3]{8} = 2).

Exam tips

  1. When you claim two triangles are similar, name the test (AAA, SSS, SAS or RHS) and list the equal angles or the matching ratios as evidence.

  2. Write the scale factor as a calculation before using it: "k=128=1.5k = \dfrac{12}{8} = 1.5". It earns the method mark even if you slip later.

  3. Draw the two similar figures separately, the same way round, and label them. It makes the corresponding sides obvious in overlapping triangles.

  4. Convert to one unit before you form a ratio or a scale. Then convert the final answer to the unit the question asks for.

  5. Keep full calculator values for kk (or keep it as a fraction like 43\frac{4}{3}) until the end, especially before squaring or cubing.

  6. Ask "length, area or volume?" before you scale: kk for lengths, k2k^2 for areas and surface areas, k3k^3 for volumes, capacities and masses of the same material.

  7. Check reasonableness: a real room 0.36 m long or a model car 4 m long means a scale was applied the wrong way.

  8. In complex unfamiliar questions, state any assumption, such as "the two tanks are similar" or "the sun's rays are parallel", and say how it affects your answer.

Where this shows up

  • Reading floor plans and site plans when buying, renting or renovating a house, and estimating flooring, tiles, paint or turf.

  • Planning a bushwalk or a drive from a topographic or road map.

  • Building and collecting scale models of cars, trains, aircraft and buildings.

  • Measuring heights and distances you can't reach, such as trees, buildings and river widths, as surveyors do.

  • Enlarging photos, posters and logos without distorting them, and choosing paper sizes such as A4 and A3.

  • Comparing the value of different sizes of pizza, drinks and containers.

  • Engineers testing scale models of dams, bridges and ships before the real thing is built.

Save your progress with a free account