Lesson 7 of 13 · 18 min

Strong, weak, concentrated and dilute

Classify acids by the protons they donate, name the strong and weak acids and bases, and separate strength from concentration using dissociation, pH, conductivity and rate.

What you will be able to do

  • Describe an acid as a proton donor, and classify acids as monoprotic, diprotic or polyprotic.
  • Name the strong acids and bases and the families of weak acids and bases in the syllabus.
  • Discriminate between strong and weak, and between concentrated and dilute.
  • Compare strong and weak acids by extent of dissociation, pH, electrical conductivity and rate of reaction, using data.

Hydrochloric acid in a swimming pool shop and the ethanoic acid in vinegar are both acids, yet you would only splash one of them on chips. At the same concentration, hydrochloric acid has a much lower pH, conducts electricity far better and fizzes far faster with magnesium. The difference is not how much acid is in the bottle but what happens to each molecule in water.

Definition

An acid is a proton donor

An acid is a substance that can donate a proton (a hydrogen ion, HX+\ce{H+}). In water the proton is donated to a water molecule, forming the hydronium ion, HX3OX+\ce{H3O+}:

HCl(g)+HX2O(l)→HX3OX+(aq)+ClX−(aq)\ce{HCl(g) + H2O(l) -> H3O+(aq) + Cl-(aq)}

HX+(aq)\ce{H+(aq)} and HX3OX+(aq)\ce{H3O+(aq)} mean the same thing in equations and in [HX+][\ce{H+}]; a bare proton never exists on its own in water.

How many protons an acid can donate
TypeProtons donated per moleculeExamples
MonoproticOneHCl\ce{HCl}, HNOX3\ce{HNO3}, ethanoic acid CHX3COOH\ce{CH3COOH} (only the H on the −COOH\ce{-COOH} group is acidic)
DiproticTwo, one at a timesulfuric acid HX2SOX4\ce{H2SO4}, carbonic acid HX2COX3\ce{H2CO3}, oxalic (ethanedioic) acid HX2CX2OX4\ce{H2C2O4}
PolyproticMore than one (triprotic: three)phosphoric acid HX3POX4\ce{H3PO4}, citric acid

Ethanoic acid, CHX3COOH\ce{CH3COOH}, has four hydrogen atoms. Why is it classified as monoprotic?

Choose one answer

Key idea

Strong and weak

Strength is about the extent of ionisation (dissociation) in water.

  • A strong acid ionises completely: HNOX3(aq)+HX2O(l)→HX3OX+(aq)+NOX3X−(aq)\ce{HNO3(aq) + H2O(l) -> H3O+(aq) + NO3-(aq)}, a one-way arrow. The strong acids to know are hydrochloric, nitric and sulfuric acid (sulfuric acid's first proton).
  • A weak acid ionises only partly; an equilibrium lies well to the left: CHX3COOH(aq)+HX2O(l)⇌CHX3COOX−(aq)+HX3OX+(aq)\ce{CH3COOH(aq) + H2O(l) <=> CH3COO-(aq) + H3O+(aq)}. Carboxylic acids (methanoic, ethanoic, citric) and carbonic acid are weak.
  • Strong bases dissociate completely into hydroxide ions: the group 1 hydroxides (LiOH\ce{LiOH}, NaOH\ce{NaOH}, KOH\ce{KOH}) and barium hydroxide, Ba(OH)X2(s)→BaX2+(aq)+2 OHX−(aq)\ce{Ba(OH)2(s) -> Ba^2+(aq) + 2OH-(aq)}.
  • Weak bases accept protons from water only partly: ammonia and the amines, such as methanamine (methylamine), CHX3NHX2\ce{CH3NH2}. For ammonia: NHX3(aq)+HX2O(l)⇌NHX4X+(aq)+OHX−(aq)\ce{NH3(aq) + H2O(l) <=> NH4+(aq) + OH-(aq)}.

Definition

Concentrated and dilute

Concentration is about how much acid or base is dissolved per litre. A concentrated solution has a lot of solute per litre; a dilute one has little.

The two ideas are independent. 10 mol L−110\unit{mol\,L^{-1}} ethanoic acid is concentrated and weak; 0.001 mol L−10.001\unit{mol\,L^{-1}} hydrochloric acid is dilute and strong.

Interactive

Strong against weak, side by side

Both beakers start at 0.1 mol L−10.1\unit{mol\,L^{-1}}. Compare the particles, the pH, the bulb and the bubbles. Then make the strong acid dilute and the weak acid concentrated: can you make the two pH values match?

0.10 mol L−10.10\unit{mol\,L^{-1}} hydrochloric acid and 0.10 mol L−10.10\unit{mol\,L^{-1}} ethanoic acid at 25 °C25\unit{°C}
PropertyHydrochloric acid (strong)Ethanoic acid (weak)Why
Extent of ionisation100 %100\,\%about 1.3 %1.3\,\%Strength is the extent of ionisation
[HX3OX+][\ce{H3O+}]0.10 mol L−10.10\unit{mol\,L^{-1}}1.3×10−3 mol L−11.3 \times 10^{-3}\unit{mol\,L^{-1}}Only ionised molecules release HX3OX+\ce{H3O+}
pH1.001.002.882.88Lower [HX3OX+][\ce{H3O+}] means a higher pH
Electrical conductivityHighLowConductivity depends on the concentration of mobile ions
Rate with magnesium or a carbonateFast, vigorous fizzingSlowRate depends on [HX3OX+][\ce{H3O+}], which sets the collision frequency
Moles of NaOH to neutralise 25.0 mL25.0\unit{mL}2.50×10−32.50 \times 10^{-3}2.50×10−32.50 \times 10^{-3}Neutralisation removes HX3OX+\ce{H3O+}, so the weak acid keeps ionising until it is all used

Common mistake

Strong is not concentrated

Do not use "strong" to mean "concentrated", or "weak" to mean "dilute". Strength is fixed for an acid; concentration depends on how much water you add. A dilute strong acid can have a higher pH than a concentrated weak acid: 0.0010 mol L−10.0010\unit{mol\,L^{-1}} HCl\ce{HCl} has pH 3.003.00, while 1.0 mol L−11.0\unit{mol\,L^{-1}} ethanoic acid has pH 2.382.38.

Two acid solutions have the same pH. Solution X is 0.0010 mol L−10.0010\unit{mol\,L^{-1}} hydrochloric acid and solution Y is ethanoic acid. Which statement is correct?

Choose one answer

Worked example

Identify five solutions from pH and conductivity

  • Complex familiar

Five unlabelled solutions are known to be 0.10 mol L−10.10\unit{mol\,L^{-1}} hydrochloric acid, 0.10 mol L−10.10\unit{mol\,L^{-1}} ethanoic acid, 0.0010 mol L−10.0010\unit{mol\,L^{-1}} hydrochloric acid, 0.10 mol L−10.10\unit{mol\,L^{-1}} ammonia and 0.10 mol L−10.10\unit{mol\,L^{-1}} sodium hydroxide. A student measures each one.

SolutionpHConductivityReaction with magnesium
P2.92.9lowslow bubbling
Q13.013.0highnone
R1.01.0highrapid bubbling
S3.03.0lowvery slow bubbling
T11.111.1lownone

Identify each solution, and explain how P and S can have similar pH values and conductivities.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. pH below or above 7 separates acids from bases.

  2. Compare pH with −log⁡10c-\log_{10}c: equal means fully ionised (strong).

  3. Low conductivity means few ions: weak, or dilute, or both.

Watch out for

  • Assuming the lowest conductivity must be the weak acid. A dilute strong acid can conduct as poorly.

Equal masses of magnesium ribbon (an excess) are added to 50 mL50\unit{mL} of 0.10 mol L−10.10\unit{mol\,L^{-1}} HCl\ce{HCl} and to 50 mL50\unit{mL} of 0.10 mol L−10.10\unit{mol\,L^{-1}} CHX3COOH\ce{CH3COOH}. Compare the initial rate of reaction and the total volume of hydrogen produced.

Choose one answer

Note

Investigating the properties of acids and bases

A fair comparison changes one thing at a time. To compare strength, use the same concentration of a strong and a weak acid at the same temperature, and measure:

  • pH with a calibrated pH meter (better than universal indicator, which reads only to about ±1\pm 1).
  • Conductivity with a conductivity meter, or a simple circuit with a bulb or ammeter.
  • Rate with identical pieces of magnesium ribbon or marble chips, timing the reaction or collecting the gas.

To compare concentration, dilute one acid ten-fold at a time and repeat the measurements.

Summary

  • Acids are proton donors; in water they form HX3OX+\ce{H3O+}. Monoprotic acids donate one proton, diprotic two, polyprotic more than one.

  • Strong acids: HCl\ce{HCl}, HNOX3\ce{HNO3}, HX2SOX4\ce{H2SO4}. Strong bases: group 1 hydroxides and Ba(OH)X2\ce{Ba(OH)2}.

  • Weak acids: carboxylic acids and carbonic acid. Weak bases: ammonia and amines.

  • Strong or weak is the extent of ionisation; concentrated or dilute is the amount per litre.

  • At the same concentration a strong acid has a lower pH, higher conductivity and faster rate than a weak acid, but neutralises the same amount of base.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 7 of 130% read

Save your progress with a free account