Lesson 6 of 10 · 20 min

Measuring species diversity

Calculate species richness, relative abundance, percentage cover, percentage frequency and Simpson's diversity index from field data, and use them to compare two sites.

What you will be able to do

  • Determine species richness and the relative abundance (evenness) of each species from count data.
  • Calculate percentage frequency and percentage cover from quadrat data.
  • Calculate Simpson's diversity index, SDI=1−(∑n(n−1)N(N−1))SDI = 1 - \left(\frac{\sum n(n-1)}{N(N-1)}\right), and interpret its value.
  • Compare the species diversity of two sites and judge whether the comparison is valid.

Two patches of open forest on the same hillside both have five kinds of understorey plant. Are they equally diverse? Not necessarily. In one, the five species might be present in similar numbers. In the other, a single grass might make up almost every plant. Ecologists use several measures, each answering a slightly different question.

Definition

Richness and evenness

  • Species richness is the number of different species in a sample or area.
  • Evenness (relative species abundance) is how similar the abundances of those species are. Each species' relative abundance is its share of all the individuals:
relative abundance=nN×100 %\text{relative abundance} = \frac{n}{N} \times 100\,\%

where nn is the number of that species and NN the total of all species.

Relative abundance of five understorey species (1 to 5) at two sites, A and B, with the same richness (100 plants counted at each). Site A is even; site B is dominated by species 1.

Both sites have a richness of 5, but site A is far more diverse: pick two plants at random there and they are probably different species. At site B they are probably both species 1.

Percentage frequency and percentage cover

Counting individuals is hard for plants that spread, such as grasses and groundcovers, where it is not clear where one plant ends. Two other measures avoid counting.

Key idea

Frequency and cover

percentage frequency=number of quadrats containing the speciestotal number of quadrats×100\text{percentage frequency} = \frac{\text{number of quadrats containing the species}}{\text{total number of quadrats}} \times 100 percentage cover=area of the quadrat covered by the speciestotal area of the quadrat×100\text{percentage cover} = \frac{\text{area of the quadrat covered by the species}}{\text{total area of the quadrat}} \times 100

Frequency says how widespread a species is; cover says how much ground it occupies. Cover is often estimated with a gridded quadrat: count the squares more than half covered by the species. Plants grow in layers, so the covers of all species in a quadrat can add to more than 100 %.

A 1 m21\unit{m^2} quadrat divided into 25 squares. Shaded squares are more than half covered by a groundcover plant.

Use the gridded quadrat above. Calculate the percentage cover of the groundcover plant.

in \%

Worked example

Percentage frequency and cover from quadrat data

  • Simple familiar
  • Technology active

Eight 1 m21\unit{m^2} quadrats were placed at random in a grassy woodland. The table gives the percentage cover of two species in each quadrat.

Quadrat12345678
Kangaroo grass (Themeda triandra)3502045010255
Blue flax-lily (Dianella caerulea)050010000

Calculate the percentage frequency and the mean percentage cover of each species, and compare them.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Frequency: quadrats containing the species ÷ total quadrats × 100.

  2. Mean cover: sum of the covers ÷ total quadrats, zeros included.

Watch out for

  • Averaging cover over only the quadrats where the species occurs (23.3 % for kangaroo grass), which overstates it for the site.

Simpson's diversity index

Richness ignores evenness, and relative abundance gives a list of numbers rather than one. Simpson's diversity index combines both into a single value.

nn = number of individuals of each species; NN = total number of individuals of all species
SDI=1−(∑n(n−1)N(N−1))SDI = 1 - \left(\frac{\sum n(n-1)}{N(N-1)}\right)

Key idea

What the index means

The fraction ∑n(n−1)N(N−1)\frac{\sum n(n-1)}{N(N-1)} is the probability that two individuals picked at random (without putting the first back) are the same species. So SDISDI is the probability that they are different species.

  • SDI=0SDI = 0: only one species, no diversity.
  • SDISDI close to 1: many species in similar numbers, high diversity.
  • It rises with richness and with evenness.

Calculating SDI

  1. Tabulate the counts

    One row per species, with its count nn.

  2. Find n(n−1)n(n-1) for each species

    A species with n=1n = 1 contributes 1×0=01 \times 0 = 0.

  3. Add them to get ∑n(n−1)\sum n(n-1), and add the counts to get NN

  4. Divide by N(N−1)N(N-1) and subtract from 1

    Calculate N(N−1)N(N-1) once, for the whole sample, not for each species.

Worked example

Compare the diversity of two open forest sites

  • Complex familiar
  • Technology active

Students counted ground-layer plants in ten 1 m21\unit{m^2} quadrats at each of two sites in the same eucalypt open forest: a dry ridge and a moist gully.

SpeciesRidge, nnGully, nn
Kangaroo grass (Themeda triandra)426
Spiny-headed mat-rush (Lomandra longifolia)1831
Blue flax-lily (Dianella caerulea)1124
Bracken (Pteridium esculentum)919
Native violet (Viola hederacea)012

Calculate Simpson's diversity index for each site, to two decimal places, and compare the sites.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. For each site, find NN and ∑n(n−1)\sum n(n-1).

  2. SDI=1−∑n(n−1)N(N−1)SDI = 1 - \frac{\sum n(n-1)}{N(N-1)}.

  3. Compare, and explain the difference with richness and evenness.

  4. Check the comparison is fair (same methods, effort, timing).

Watch out for

  • Using N=4N = 4 or 55 (the number of species).

  • Saying the ridge is more diverse because it has more of one species.

A pitfall trap survey in a patch of brigalow scrub caught these ground-dwelling invertebrates.

GroupAntsBeetlesSpidersCrickets
Number caught10631

Calculate Simpson's diversity index, to two decimal places.

Round to 2 decimal places.

Interactive

Diversity of a site

Sample two sites and calculate richness and Simpson's index for each. Which changes the index more: adding a rare species or evening out the common ones?

Exam tip

Comparing two sites

The syllabus asks you to compare diversity in two spatially variant sites of the same classification: two patches of open forest, or two mangrove stands on different creeks. For a valid comparison:

  • sample both sites with the same method, quadrat size, number of samples and counting criteria, at the same time of year;
  • compare the same measure (richness, SDISDI) calculated the same way;
  • judge whether the difference is bigger than the variation between repeat samples before calling it real;
  • suggest causes from the abiotic and biotic data you collected (soil moisture, fire history, grazing), not from guesses.

Common mistake

SDI slips

  • Using the number of species for NN. NN is the number of individuals.
  • Dividing each n(n−1)n(n-1) by N(N−1)N(N-1) and forgetting to add, or adding the nn values and squaring.
  • Forgetting the 1−1 - and reporting the fraction: a high value then means low diversity.
  • Using n2n^2 and N2N^2 (another version of Simpson's index). Use the syllabus formula.

Summary

  • Species richness is the number of species; evenness is how similar their relative abundances (nN×100 %\frac{n}{N} \times 100\,\%) are.

  • Percentage frequency: the percentage of quadrats a species occurs in. Percentage cover: the percentage of the quadrat area it covers.

  • SDI=1−∑n(n−1)N(N−1)SDI = 1 - \frac{\sum n(n-1)}{N(N-1)} is the probability that two random individuals are different species; it runs from 0 towards 1.

  • SDI increases with both richness and evenness.

  • Compare sites only with the same methods, effort and timing, and check the difference against the variation between repeats.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 6 of 100% read

Save your progress with a free account