Biology · Unit 3 · Topic 1

Biodiversity and populations

Genetic, species and ecosystem diversity, species concepts, Linnaean classification and keys, field sampling, the Lincoln index, Simpson's diversity index, distribution and abundance, Specht and Holdridge, and population growth.

  • 10 lessons
  • 2 h 51 min of lessons
  • 16 worked examples
  • 20 hours in the syllabus
0 of 10

Start here

Biodiversity and the species concept

Lesson 1 of 10 · 18 min

Start the topic

Lessons

10
  1. Biodiversity and the species concept (up next)

    Describe genetic, species and ecosystem diversity, apply the biological species concept, and explain where it fails and which other species concepts fill the gaps.

  2. Linnaean classification and naming species

    Identify the major taxa of the Linnaean system, name species with binomial nomenclature, infer relatedness from a classification, and explain why species are reclassified.

  3. Using and writing dichotomous keys

    Identify organisms by working through the couplets of a dichotomous key, and write a key of your own with clear, observable, contrasting features.

  4. Sampling an ecosystem

    Choose a sampling method (random, systematic or stratified) and technique (quadrat, line or belt transect, capture–recapture) to suit a site, and reduce bias in how you sample.

  5. Capture–recapture and the Lincoln index

    Estimate the size of an animal population with the Lincoln index, N=M×nmN = \frac{M \times n}{m}, rearrange it, and judge how its assumptions and small samples affect the estimate.

  6. Measuring species diversity

    Calculate species richness, relative abundance, percentage cover, percentage frequency and Simpson's diversity index from field data, and use them to compare two sites.

  7. What controls distribution and abundance

    Explain how biotic and abiotic factors, habitats and microhabitats shape where species live and how many there are, and interpret transect data from an environmental gradient.

  8. Classifying ecosystems with Specht and Holdridge

    Classify and name Australian vegetation from the height, life form and foliage projective cover of its tallest stratum (Specht), and place an ecosystem in a Holdridge life zone from climate data.

  9. Births, deaths, immigration and emigration

    Calculate how much a population changes, and its growth rate per individual, per 1000 and as a percentage, from birth, death, immigration and emigration data.

  10. Growth curves, carrying capacity and r- and K-strategists

    Identify and explain exponential (J-curve) and logistic (S-curve) population growth and carrying capacity, and compare the reproductive strategies and growth curves of r- and K-strategists.

  11. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Walk 200 metres from a eucalypt forest into a patch of rainforest and almost everything changes: the light, the soil moisture, the plants and the animals that live among them. Ecologists turn that impression into numbers. They name and classify what they find, count it with quadrats, transects and capture–recapture, and summarise it with measures such as species richness, percentage cover and Simpson's diversity index.

You start with what biodiversity is (genetic, species and ecosystem diversity) and the surprisingly hard question of what a species is. Then you classify and name organisms with the Linnaean system and identify them with dichotomous keys. The middle of the topic is fieldwork: choosing a sampling method and technique, minimising bias, estimating a population with the Lincoln index, and measuring diversity. You then explain why species are where they are, using biotic and abiotic factors, habitats and distribution patterns, and classify whole ecosystems with Specht's system and the Holdridge life zones. The topic ends with populations: how births, deaths, immigration and emigration change their size, the J-shaped and S-shaped growth curves, and r- and K-strategists.

The science understanding dot points can be assessed in the external exam, where a calculator is allowed. IA1, the data test, is on Unit 3, so the practice here leans on data: tables and graphs from field studies, calculations, trends, limitations, uncertainty and conclusions. The science as a human endeavour and science inquiry points (species concepts, classification and computing, stratified sampling, environmental gradients, comparing two ecosystems) run through the lessons as contexts for your internal assessments.

Before you start

  • Cells, DNA, genes and alleles at a Year 10 level: a gene is a section of DNA, and alleles are different versions of a gene.
  • Sexual reproduction makes offspring that differ genetically from their parents.
  • Food chains and webs, producers and consumers (Year 9 and 10 Science).
  • Percentages, averages, reading tables and line graphs, and rearranging a simple formula.

What QCAA says you need to know23 dot points

Biodiversity, species and classification

5 hours

Sampling and measuring diversity

6 hours
  • Use the Lincoln index (N=M×nmN = \frac{M \times n}{m}) to estimate the size of a population.LessonCapture–recapture and the Lincoln index
  • Determine the diversity of species using measures such as species richness, evenness (relative species abundance), percentage cover, percentage frequency and Simpson's diversity index, SDI=1−(∑n(n−1)N(N−1))SDI = 1 - \left(\frac{\sum n(n-1)}{N(N-1)}\right).LessonMeasuring species diversity
  • Describe how sampling can be used to investigate the species diversity of a given area, considering the most appropriate sampling method: random, systematic, stratified; sampling technique: quadrats, line transect, belt-transect, capture-recapture; strategies to minimise bias: size and number of samples, random-number generators, counting criteria, calibrating equipment and noting associated precision; measure/s of diversity.LessonsSampling an ecosystemCapture–recapture and the Lincoln indexMeasuring species diversity

Distribution, abundance and ecosystems

5 hours
  • Describe how the distribution and abundance of species in an ecosystem are influenced by biotic factors — food availability, competition for resources, predation, disease; abiotic factors — space, shelter, availability of water, nutrients, environmental conditions.LessonWhat controls distribution and abundance
  • Explain that ecosystems are composed of varied habitats, including microhabitats, which may impact the distribution of species (e.g. uniform, random or clumped), and therefore the validity and reliability of different sampling methods/techniques.LessonsSampling an ecosystemWhat controls distribution and abundance
  • Interpret data from an experiment investigating how abiotic factors affect the distribution, abundance and/or biodiversity of species in an ecosystem.LessonWhat controls distribution and abundance
  • Interpret data to classify and name ecosystems using Specht's classification system and the Holdridge life zone classification scheme.LessonClassifying ecosystems with Specht and Holdridge

Population growth

4 hours

Science as a human endeavour

  • Appreciate that methods of classification are directly related to the purpose for which the data will be used. Hierarchical systems, such as the Linnaean system, can be used to organise, analyse and communicate data about biodiversity. For example, the hierarchical nature of the Linnaean system allows scientists to infer similarities between species; however, as the system was originally based primarily on physical features, the categorisation of species does not always reflect evolutionary relatedness. Species may be re-classified as new information becomes available.LessonLinnaean classification and naming species
  • Appreciate that there are multiple definitions for species, and each has limitations. Examples include the biological species concept, phylogenetic species concept, ecological species concept and morphological species concept.LessonBiodiversity and the species concept
  • Appreciate that developments in software, computing and supercomputing have been important in ecological classification as they have enabled scientists to classify regions according to large sets of biotic and abiotic data and to compare data over time. Supercomputers have also enabled the development of large, complex models to analyse species data collected from multiple individuals in a range of locations, and to infer relationships between species, including their shared evolutionary past.LessonsLinnaean classification and naming speciesClassifying ecosystems with Specht and Holdridge

Science inquiry

Subject matter from the Biology General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Levels of biodiversity

    Describe genetic, species and ecosystem diversity with examples, and explain why each matters.

    Practise
  • What counts as a species

    Apply the biological species concept, identify its limitations, and compare it with the morphological, ecological and phylogenetic concepts.

    Practise
  • Linnaean classification and naming

    Order the major taxa, write binomial names correctly, infer relatedness from a classification, and explain why species are reclassified.

    Practise
  • Using dichotomous keys

    Work through a key to identify an organism, and write a key that splits a group with observable features.

    Practise
  • Choosing a sampling design

    Choose a sampling method and technique for a site, and reduce bias with sample size and number, random numbers, counting criteria and calibration.

    Practise
  • Capture–recapture and the Lincoln index

    Estimate population size with $N = \frac{M \times n}{m}$, rearrange it, and judge whether its assumptions hold.

    Practise
  • Measuring species diversity

    Calculate species richness, relative abundance, percentage cover, percentage frequency and Simpson's diversity index, and compare sites with them.

    Practise
  • Distribution and abundance

    Explain how biotic and abiotic factors, habitats and microhabitats shape where species live and how many there are, and how distribution patterns affect sampling.

    Practise
  • Interpreting field data

    Identify trends, relationships and anomalies in ecological data, judge reliability, validity and uncertainty, and draw and justify conclusions.

    Practise
  • Classifying ecosystems

    Name a vegetation formation with Specht's system and a life zone with the Holdridge scheme, and explain how classification supports management.

    Practise
  • Population change and growth rate

    Calculate population change and growth rate from birth, death, immigration and emigration data, per individual, per 1000 and as a percentage.

    Practise
  • Growth curves and life strategies

    Identify and explain exponential and logistic growth, carrying capacity, and the reproductive strategies and growth curves of r- and K-strategists.

    Practise

Worked examples16

All 16

Common mistakes

Swapping n and m in the Lincoln index

nn is the whole second sample and mm only the marked ones within it, so m≤nm \le n and N=M×nmN = \frac{M \times n}{m} is always at least nn. An estimate smaller than the second sample means the letters are swapped.

Using N for the wrong thing in Simpson's index

NN is the total number of individuals of all species, not the number of species. Work out n(n−1)n(n-1) for each species, add them, and divide by N(N−1)N(N-1) only once.

Forgetting the 1 − in Simpson's index

The fraction on its own is the chance that two individuals are the same species. A high value of that fraction means low diversity. Subtract it from 1.

Thinking species richness alone measures diversity

Two sites with five species each can differ greatly: one with 96 % of individuals in one species is far less diverse than one with 20 % in each. Diversity is richness and evenness.

Confusing percentage cover with percentage frequency

Frequency counts where a species is present (in how many quadrats); cover measures how much ground it covers. A grass in every quadrat at 5 % cover has 100 % frequency.

Calling a random quadrat placement one you chose yourself

Throwing a quadrat or choosing "random-looking" spots is biased. Random means coordinates from a random-number generator.

Leaving out immigration and emigration

Population change is (B+I)−(D+E)(B + I) - (D + E). Births minus deaths is only the natural increase.

Calling exponential growth "fast" and logistic growth "slow"

A logistic curve grows almost exponentially at first. The difference is that its growth rate falls as the population nears the carrying capacity, so it levels off.

Saying r-strategists are always more successful

Each strategy suits its environment: r-strategists exploit unstable or newly opened habitats; K-strategists compete well in stable, crowded ones.

Treating the biological species concept as the only definition

It cannot be applied to asexual organisms or fossils, and it struggles with hybrids and separated populations. The morphological, ecological and phylogenetic concepts fill those gaps.

Exam tips

  1. There is no Biology formula book. Learn the Lincoln index, Simpson's diversity index as the syllabus prints it, percentage cover and frequency, and population change (B+I)−(D+E)(B + I) - (D + E).

  2. In calculations, write the formula, substitute with units, and give the answer to the precision of the data. A population estimate is a whole number of animals; an SDI is usually given to two or three decimal places.

  3. Describe a trend with direction and data: "As salinity increased from 5 to 30 ppt, the density of grey mangroves fell from 12 to 2 per 100 m²." Quote values from the table or graph.

  4. "Explain" a distribution means a cause: name the abiotic or biotic factor and how it affects the organism (water loss, light for photosynthesis, competition for space).

  5. For reliability, look at agreement between repeats and the number of samples; for validity, ask whether the method measured what the question asked (were all habitats sampled, were the quadrats random, was only one variable changed?).

  6. When comparing two sites, compare the same measure calculated the same way, and say whether the difference is larger than the variation between repeats.

  7. Give scientific names in italics (or underlined when handwritten), genus capitalised, specific epithet lower case.

  8. In a data test, an improvement must be specific and say why it helps: "use 20 quadrats per zone instead of 5, to reduce the effect of clumped distributions on the mean".

Where this shows up

  • Threatened species monitoring: capture–recapture of koalas, bilbies and northern hairy-nosed wombats (with hair traps and DNA) to track population size.

  • Environmental impact assessments before mining, dams or housing estates measure diversity and map regional ecosystems.

  • Queensland's regional ecosystem mapping (Queensland Herbarium) underpins vegetation management, clearing permits and protected-area planning.

  • Fisheries set catch limits from population models that include births, deaths, immigration and emigration.

  • Pest management: understanding r-strategist booms (mouse plagues, locusts, cane toads) helps time control measures.

  • Reef monitoring on the Great Barrier Reef uses transects and percentage cover of hard coral to report reef health.

  • Citizen science projects such as the Atlas of Living Australia and Reef Life Survey pool millions of species records for researchers.

Save your progress with a free account