Lesson 2 of 7 · 20 min

Related rates

Use the chain rule to link the rates of change of connected quantities, such as the volume and radius of a balloon or the depth of water in a conical tank.

What you will be able to do

  • Identify the known rate, the required rate and an equation linking the two quantities.
  • Use the chain rule, such as drdt=drdV×dVdt\frac{dr}{dt} = \frac{dr}{dV} \times \frac{dV}{dt}, to find an unknown rate at an instant.
  • Solve related rates problems involving the volume and surface area of spheres, cones and pyramids, eliminating extra variables with similar triangles.

Blow air into a balloon at a steady rate. At first the balloon swells quickly, then more and more slowly, even though the air goes in at the same rate. The volume and the radius are linked by V=43πr3V = \frac{4}{3}\pi r^3, so their rates of change are linked too. Finding one rate from another is a related rates problem.

Interactive

Steady air in, slowing growth

The horizontal axis is the radius rr (cm) and the vertical axis is drdt\frac{dr}{dt} (cm s⁻¹) when air goes in at dVdt\frac{dV}{dt} cm³ s⁻¹. Doubling the radius quarters the rate at which it grows, because the same air is spread over four times the surface.

Key idea

Related rates are the chain rule

If VV depends on rr and rr depends on time, then

dVdt=dVdr×drdt\frac{dV}{dt} = \frac{dV}{dr} \times \frac{dr}{dt}

Write the chain rule so the "inner" variables cancel, like fractions: the rate you want on the left, the rate you know and a derivative you can find on the right.

Water flows into a tank, and you know dVdt\frac{dV}{dt}. You want dhdt\frac{dh}{dt}, where hh is the depth. Which statement is correct?

Choose one answer

Solving a related rates problem

  1. Draw a diagram and name the variables

    Label the quantities that change with letters, and the fixed ones with numbers.

  2. Write down the known rate and the rate you want, with units

    For example, dVdt=100 cm3 s−1\frac{dV}{dt} = 100\ \text{cm}^3\,\text{s}^{-1}; find drdt\frac{dr}{dt} when r=5r = 5.

  3. Find an equation linking the two quantities

    Use a formula (V=43πr3V = \frac{4}{3}\pi r^3) and, if there is an extra variable, eliminate it first (similar triangles, a fixed ratio).

  4. Differentiate the equation

    Keep every changing quantity as a variable.

  5. Write the chain rule and substitute the instant

    Only now put in the values at the instant asked about. State the answer with units.

Worked example

An inflating spherical balloon

  • Simple familiar
  • Technology free

Air is pumped into a spherical balloon at 100100 cm³ s⁻¹. When the radius is 55 cm, determine

(a) the rate at which the radius is increasing

(b) the rate at which the surface area is increasing.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Write the known and wanted rates with units.

  2. Find the formula linking the quantities and differentiate it.

  3. Write the chain rule and substitute the instant.

Watch out for

  • Substituting r=5r = 5 into VV before differentiating.

  • Multiplying by dVdr\frac{dV}{dr} instead of dividing.

The radius of a sphere is increasing at 0.20.2 cm s⁻¹. Determine the exact rate at which its volume is increasing when the radius is 1010 cm, in cm³ s⁻¹.

fracdVdt =
Reads asYour answer shows here as maths.

Cones are harder because V=13πr2hV = \frac{1}{3}\pi r^2 h has two changing variables. When water fills a conical tank, the surface radius rr and the depth hh are tied together by similar triangles, so you can write rr in terms of hh and get VV as a function of hh alone.

The water forms a smaller cone similar to the tank, so rh=36\frac{r}{h} = \frac{3}{6}.

Worked example

Filling a conical tank

  • Complex familiar

A water tank is an inverted cone with top radius 33 m and height 66 m. Water is pumped in at 22 m³ min⁻¹. Determine the rate at which the depth of water is rising when the water is 44 m deep.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Draw the cone and the water, and label rr and hh.

  2. Use similar triangles to express rr in terms of hh.

  3. Write VV as a function of hh only, differentiate, then use the chain rule.

Watch out for

  • Differentiating V=13πr2hV = \frac{1}{3}\pi r^2h with rr held at 33: the water's radius changes, the tank's does not.

  • Using rh=63\frac{r}{h} = \frac{6}{3}: radius over height of the tank is 36\frac{3}{6}.

Common mistake

Substituting too early

Put in the value at the instant (such as h=4h = 4) only after differentiating. If you substitute first, the quantity becomes a constant and its derivative is zero. Fixed dimensions, like the tank's 33 m and 66 m, can go in from the start.

A pile of grain forms a square-based pyramid whose height always equals the side length xx cm of its base, so V=13x3V = \frac{1}{3}x^3. Grain is added at 1818 cm³ s⁻¹. Determine dxdt\frac{dx}{dt} when x=3x = 3 cm.

in cm s -1

Exam tip

Units and direction

State every rate with its units, such as m min−1\text{m}\,\text{min}^{-1} or cm2 s−1\text{cm}^2\,\text{s}^{-1}. If a quantity is decreasing, its rate is negative: say "the depth is decreasing at 0.20.2 m min⁻¹", or give dhdt=−0.2\frac{dh}{dt} = -0.2 m min⁻¹. In Paper 2, give an exact answer and its decimal approximation if the question does not specify.

Summary

  • Related rates problems link two rates of change through the chain rule.

  • List the known rate and the required rate, then find an equation linking the quantities.

  • For cones, use similar triangles to remove the extra variable before differentiating.

  • Differentiate first, then substitute the values at the instant.

  • Give rates with units, and say whether the quantity is increasing or decreasing.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 2 of 70% read

Save your progress with a free account