Specialist Mathematics · Unit 4 · Topic 3

Rates of change and differential equations

Differentiate implicitly, solve related rates problems with the chain rule, then solve first-order differential equations by direct integration and separation of variables, read slope fields, and model decay, cooling and logistic growth.

  • 7 lessons
  • 2 h 14 min of lessons
  • 15 worked examples
  • 11 hours in the syllabus
0 of 7

Start here

Implicit differentiation

Lesson 1 of 7 · 18 min

Start the topic

Lessons

7
  1. Implicit differentiation (up next)

    Find dydx\frac{dy}{dx} for curves such as x2+y2=25x^2 + y^2 = 25 without solving for yy, by differentiating every term with respect to xx and using the chain rule on each yy term.

  2. Related rates

    Use the chain rule to link the rates of change of connected quantities, such as the volume and radius of a balloon or the depth of water in a conical tank.

  3. Differential equations and their solutions

    Recognise a first-order differential equation, verify a solution by substitution, and solve dydx=f(x)\frac{dy}{dx} = f(x) by direct integration to get general and particular solutions.

  4. Slope fields

    Draw and read slope fields, sketch solution curves through given points, spot equilibrium solutions, and match a field to its differential equation.

  5. Separation of variables

    Solve dydx=g(y)\frac{dy}{dx} = g(y) and dydx=f(x)g(y)\frac{dy}{dx} = f(x)g(y) by separating the variables, integrating both sides and using an initial condition, handling ln⁡∣y∣\ln|y| and the arbitrary constant correctly.

  6. Radioactive decay and Newton's law of cooling

    Solve dNdt=−λN\frac{dN}{dt} = -\lambda N and dTdt=−k(T−Ts)\frac{dT}{dt} = -k(T - T_s) by separation of variables, find the constants from data, and use half-life and cooling models to answer questions in context.

  7. Logistic growth

    Solve the logistic equation dPdt=rP(1−PK)\frac{dP}{dt} = rP\left(1 - \frac{P}{K}\right) with partial fractions, find the carrying capacity and the moment of fastest growth, and use the model to answer questions about real populations.

  8. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

Many quantities are easier to describe by how they change than by what they are. A cooling cup of tea loses heat faster when it is hotter. A population grows faster when there are more breeders, until food runs short. Equations like these, which link a quantity to its own rate of change, are differential equations.

This topic starts with two tools built on the chain rule. Implicit differentiation finds gradients of curves such as x2+y2=25x^2 + y^2 = 25 without solving for yy, and related rates link how fast one quantity changes to how fast another does: how quickly the water rises in a conical tank, or how fast a balloon's radius grows.

Then you solve first-order differential equations of the forms dydx=f(x)\frac{dy}{dx} = f(x), dydx=g(y)\frac{dy}{dx} = g(y) and dydx=f(x)g(y)\frac{dy}{dx} = f(x)g(y), picture them with slope fields, and use them to model radioactive decay, Newton's law of cooling and logistic growth, with and without technology.

Before you start

Builds on Integration techniques, Differentiation of exponential and logarithmic functions, Differentiation of trigonometric functions and differentiation rules and Introduction to integration.

  • The chain, product and quotient rules, and derivatives of exe^x, ln⁡(x)\ln(x) and the trigonometric functions (Mathematical Methods Unit 3).
  • Integration techniques from Unit 4 Topic 1, especially ∫1x dx=ln⁡∣x∣+c\int \frac{1}{x}\,dx = \ln|x| + c and partial fractions with two distinct linear factors.
  • Index and logarithm laws, including ea+b=eaebe^{a + b} = e^a e^b and solving ekt=me^{kt} = m for tt.
  • Volume and surface area formulas for spheres, cones and pyramids.

What QCAA says you need to know5 dot points

Rates of change

3 hours
  • Use implicit differentiation to determine the gradient of curves whose equations are given in implicit form.LessonImplicit differentiation
  • Model and solve related rates problems as instances of the chain rule including situations that involve surface area and volume of cones, pyramids and spheres, with and without technology.LessonRelated rates

Differential equations

8 hours

Subject matter from the Specialist Mathematics General senior syllabus 2025 v1.4 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Implicit differentiation

    Differentiate both sides with respect to x, using the chain rule on every y term, and solve for dy/dx.

    Practise
  • Gradients and tangents to implicit curves

    Find the gradient, tangent or horizontal and vertical tangents of a curve given in implicit form.

    Practise
  • Related rates

    Link two rates with the chain rule, including volumes and surface areas of spheres, cones and pyramids.

    Practise
  • Checking solutions of differential equations

    Classify a differential equation, verify a solution by substitution, and tell general solutions from particular ones.

    Practise
  • Solving dydx=f(x)\frac{dy}{dx} = f(x)

    Integrate directly to get the general solution, then use an initial condition for the particular solution.

    Practise
  • Separation of variables

    Solve dy/dx = g(y) and dy/dx = f(x)g(y) by separating, integrating both sides and making y the subject.

    Practise
  • Slope fields

    Draw and read slope fields, match a field to its differential equation and sketch solution curves through given points.

    Practise
  • Decay and Newton's law of cooling

    Solve and apply exponential growth and decay and Newton's law of cooling models, including half-life.

    Practise
  • Logistic growth

    Solve the logistic equation, find the carrying capacity and fastest growth, and interpret the model in context.

    Practise

Worked examples15

All 15

Common mistakes

Forgetting dy/dx on y terms

ddx(y3)=3y2dydx\frac{d}{dx}(y^3) = 3y^2\frac{dy}{dx}, not 3y23y^2. Every term containing yy picks up a factor of dydx\frac{dy}{dx} from the chain rule.

Missing the product rule on xy

ddx(xy)=y+xdydx\frac{d}{dx}(xy) = y + x\frac{dy}{dx}. Treat xyxy as a product of two functions of xx.

Substituting the value too early in related rates

If rr is changing, keep it as a variable until after you differentiate. Substituting r=5r = 5 into V=43πr3V = \frac{4}{3}\pi r^3 first gives a constant, whose derivative is zero.

Not eliminating a variable in cone problems

For a cone of water, V=13πr2hV = \frac{1}{3}\pi r^2 h has two changing variables. Use similar triangles to write rr in terms of hh before differentiating.

Wrong sign on a decreasing quantity

A volume that is draining has dVdt<0\frac{dV}{dt} < 0. Use the negative value, and state the final rate with the right sign or in words ("decreasing at…").

Adding the constant on one side only after it is too late

From ln⁡∣y∣=x2+c\ln|y| = x^2 + c, the solution is y=Aex2y = Ae^{x^2}, not y=ex2+cy = e^{x^2} + c. Add the constant when you integrate, then exponentiate the whole right-hand side.

Separating with addition

dydx=x+y\frac{dy}{dx} = x + y is not separable. You can only separate when the right-hand side is a product f(x)g(y)f(x)g(y).

Using the surroundings temperature as the initial value

In T=Ts+(T0−Ts)e−ktT = T_s + (T_0 - T_s)e^{-kt}, TsT_s is the room temperature the object approaches, and T0T_0 is its starting temperature. Swapping them gives a model that heats up.

Losing the constant solution

Dividing by g(y)g(y) assumes g(y)≠0g(y) \neq 0. For dydx=y(10−y)\frac{dy}{dx} = y(10 - y), the equilibria y=0y = 0 and y=10y = 10 are also solutions.

Exam tips

  1. In implicit differentiation, write ddx\frac{d}{dx} in front of every term on both sides first, then differentiate term by term. Markers look for the chain-rule factor dydx\frac{dy}{dx}.

  2. For related rates, list what you know and what you want with units ("dVdt=50 cm3 s−1\frac{dV}{dt} = 50\ \text{cm}^3\,\text{s}^{-1}, find dhdt\frac{dh}{dt} when h=4h = 4"), then write the chain rule linking them.

  3. Give rates with units, such as cm s−1\text{cm}\,\text{s}^{-1}, and say whether the quantity is increasing or decreasing.

  4. Show each step of separation of variables: the separated integral, both antiderivatives with one constant, then the rearrangement. Leave ln⁡∣y∣\ln|y| with the modulus until you know the sign of yy.

  5. Find the constant as soon as you have the initial condition. It is usually easier before you rearrange.

  6. To verify a solution, substitute it into both sides of the differential equation and show they are equal. "Show that" questions need every line.

  7. Paper 2 is technology-active: you may solve for kk or tt with your calculator, but write the equation you solved and round only at the end.

  8. In modelling questions, interpret in context: what does kk mean, what happens as t→∞t \to \infty, and is the model reasonable over the time asked about?

Where this shows up

  • Radiocarbon dating uses the decay of carbon-14 (half-life about 5730 years) to date organic material.

  • Forensic scientists use Newton's law of cooling to estimate time of death from body temperature.

  • Ecologists use logistic models for fish stocks and wildlife populations, and to set sustainable harvests.

  • Epidemiologists model the spread of an infection through a population with logistic-type equations.

  • Pharmacologists model the amount of a drug in the bloodstream with exponential decay.

  • Engineers use related rates to size tanks, hoppers and silos so they fill and drain at safe rates.

Save your progress with a free account