Specialist Mathematics · Unit 4 · Topic 4

Modelling motion

Use momentum, forces and Newton's laws with calculus to model straight-line motion, choosing the right form of acceleration, for simple harmonic motion, falling with and without air resistance, and smooth inclined planes.

  • 8 lessons
  • 2 h 25 min of lessons
  • 13 worked examples
  • 11 hours in the syllabus
0 of 8

Start here

Momentum, forces and Newton's laws

Lesson 1 of 8 · 16 min

Start the topic

Lessons

8
  1. Momentum, forces and Newton's laws (up next)

    Use momentum, Newton's three laws, and impulse for constant and non-constant forces to link the forces on a body to the change in its motion.

  2. Resultant forces and non-equilibrium

    Add concurrent forces as vectors, resolve forces at an angle into components, and find the acceleration of a body that is not in equilibrium.

  3. Four ways to write acceleration

    Use dvdt\frac{dv}{dt}, d2xdt2\frac{d^2x}{dt^2}, vdvdxv\frac{dv}{dx} and ddx(12v2)\frac{d}{dx}\left(\frac{1}{2}v^2\right) for acceleration, and choose the form that turns the equation of motion into one you can integrate.

  4. Constant acceleration and free fall

    Derive the constant acceleration equations by integration and use them for straight-line motion, including bodies thrown up or dropped under gravity with no air resistance.

  5. Motion on a smooth inclined plane

    Resolve the weight, normal reaction and any applied force along and perpendicular to a smooth slope, then model the motion of a body sliding up or down it.

  6. Forces that vary with time, position or speed

    Model straight-line motion under a non-constant force by writing the equation of motion with the right form of acceleration, then separating and integrating.

  7. Simple harmonic motion

    Recognise simple harmonic motion from x¨=−ω2x\ddot{x} = -\omega^2 x, and use x=Asin⁡(ωt+α)x = A\sin(\omega t + \alpha), v2=ω2(A2−x2)v^2 = \omega^2(A^2 - x^2), T=2πωT = \frac{2\pi}{\omega} and f=1Tf = \frac{1}{T} to find positions, speeds, accelerations and times.

  8. Air resistance and terminal velocity

    Model bodies falling and rising against air resistance proportional to vv or v2v^2, and find their velocity, distance travelled, greatest height and terminal velocity.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

In Methods you differentiated and integrated displacement, velocity and acceleration as functions of time. That is half the story. In mechanics the acceleration usually comes from forces, and forces often depend on where the object is (a spring), or how fast it is going (air resistance), not on the clock.

This topic joins the two halves. You start with momentum, Newton's laws and resultant forces, then learn the four ways of writing acceleration, dvdt\frac{dv}{dt}, d2xdt2\frac{d^2x}{dt^2}, vdvdxv\frac{dv}{dx} and ddx(12v2)\frac{d}{dx}\left(\frac{1}{2}v^2\right), and how to pick the one that turns a force into a differential equation you can solve.

Then you model: motion with constant acceleration (including free fall and smooth inclined planes), forces that vary with time, position or velocity, simple harmonic motion, and objects falling or rising against air resistance, where a terminal velocity appears. The differential equations are the separable kind from Topic 3, and the integrals use the techniques from Topic 1.

Before you start

Builds on Differentiation of exponential and logarithmic functions, Introduction to integration, Introduction to proof, Integration techniques and Rates of change and differential equations.

  • Displacement, velocity and acceleration as derivatives and integrals of each other with respect to time (Methods Unit 3).
  • Vectors in i∼\tvec{i}, j∼\tvec{j} form, magnitude, direction and resolving into components (Specialist Unit 1).
  • Integration with logarithms, partial fractions and inverse tangents (Specialist Unit 4 Topic 1).
  • Separating variables to solve first-order differential equations (Specialist Unit 4 Topic 3).

What QCAA says you need to know4 dot points

Modelling motion

11 hours

Subject matter from the Specialist Mathematics General senior syllabus 2025 v1.4 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Momentum and Newton's laws

    Use p = mv, F = dp/dt = ma, impulse as change in momentum for constant and non-constant forces, and action–reaction pairs.

    Practise
  • Resultant of concurrent forces

    Add concurrent forces as vectors in i, j form or by resolving, then find the acceleration of a body that is not in equilibrium.

    Practise
  • Choosing a form of acceleration

    Use dv/dt, d²x/dt², v dv/dx or d/dx(½v²) for acceleration, and choose the form that matches what the acceleration depends on and what is asked.

    Practise
  • Constant acceleration and free fall

    Derive and use the constant acceleration equations by integration, including vertical motion under gravity without air resistance.

    Practise
  • Smooth inclined planes

    Resolve weight, normal reaction and applied forces along and perpendicular to a smooth slope, then model the motion.

    Practise
  • Non-constant acceleration

    Model motion when the force or acceleration depends on time, displacement or velocity, set up the differential equation and solve it.

    Practise
  • Simple harmonic motion

    Recognise ẍ = −ω²x, and use x = A sin(ωt + α), v² = ω²(A² − x²), T = 2π/ω and f = 1/T.

    Practise
  • Air resistance and terminal velocity

    Model falling and rising bodies with resistance proportional to v or v², find velocity, distance, maximum height and terminal velocity.

    Practise

Worked examples13

All 13

Common mistakes

Using a non-resultant force in F=maF = ma

ma∼m\tvec{a} equals the resultant of all the forces, not the largest or the applied one. List every force (weight, normal reaction, resistance, tension, thrust) on a diagram, then add them with signs.

Using dv/dt when the acceleration depends on x

If a=f(x)a = f(x), then dvdt=f(x)\frac{dv}{dt} = f(x) has three variables and cannot be separated. Use vdvdx=f(x)v\frac{dv}{dx} = f(x), or ddx(12v2)=f(x)\frac{d}{dx}\left(\frac{1}{2}v^2\right) = f(x), to get vv in terms of xx.

Using the constant acceleration equations when a is not constant

v=u+atv = u + at and s=ut+12at2s = ut + \frac{1}{2}at^2 come from integrating a constant aa. Once the acceleration depends on tt, xx or vv, set up and solve a differential equation instead.

Getting the sign of air resistance wrong

Resistance always opposes the motion. Falling with down positive: mv˙=mg−kvm\dot{v} = mg - kv. Rising with up positive: mv˙=−mg−kvm\dot{v} = -mg - kv. A rising body and a falling body need different equations.

Forgetting the square root in SHM speed

v2=ω2(A2−x2)v^2 = \omega^2(A^2 - x^2) gives v2v^2. Take the square root, and remember that vv can be positive or negative at the same xx: speed is ∣v∣=ωA2−x2|v| = \omega\sqrt{A^2 - x^2}.

Confusing period and angular frequency

ω\omega is in radians per second; the period is T=2πωT = \frac{2\pi}{\omega} and the frequency is f=1T=ω2πf = \frac{1}{T} = \frac{\omega}{2\pi}. An oscillation with period π\pi s has ω=2\omega = 2, not ω=π\omega = \pi.

Resolving the weight with sine and cosine swapped

On a slope at angle θ\theta, the weight's component along the slope is mgsin⁡(θ)mg\sin(\theta) and the component into the slope is mgcos⁡(θ)mg\cos(\theta). Check with θ=0\theta = 0: on level ground there is no component along the surface.

Mixing up action–reaction with balanced forces

The weight of a book and the table's normal reaction on it are equal and opposite, but they are not an action–reaction pair: both act on the book. The reaction to the book's weight is the book's gravitational pull on Earth.

Exam tips

  1. Start every mechanics question with a labelled diagram and a stated positive direction. Markers award a mark for a correct equation of motion, and the diagram is how you get it right.

  2. Write the equation of motion as "resultant force =ma= ma" with the form of acceleration you have chosen, for example mvdvdx=−kxm v\frac{dv}{dx} = -kx, before integrating. State why you chose that form if it is not obvious.

  3. When separating variables, keep the constant of integration (call it AA or kk) and evaluate it from the initial conditions straight away.

  4. Give exact answers in Paper 1 (2\sqrt{2}, ln⁡(2)\ln(2), π3\frac{\pi}{3}) and decimals to the requested accuracy with units in Paper 2. State which value of gg you used.

  5. "Show that" means every step: for SHM, differentiate xx twice and show that x¨=−ω2x\ddot{x} = -\omega^2 x explicitly.

  6. Check reasonableness: a terminal velocity should be positive and below the speed without resistance; a maximum height with resistance should be less than u22g\frac{u^2}{2g}; a speed in SHM can never exceed AωA\omega.

  7. On a graphics calculator you can solve the transcendental equations these models produce (for example v(t)=0.9vTv(t) = 0.9v_T) and evaluate definite integrals for time or distance numerically. Show the equation you solved.

Where this shows up

  • Vehicle safety: airbags and crumple zones increase the time of a collision so the same change in momentum needs a smaller force.

  • Skydiving: a skydiver reaches a terminal velocity of about 55 m s−155\ \mathrm{m\,s^{-1}} face down, which drops to about 5 m s−15\ \mathrm{m\,s^{-1}} once the parachute opens.

  • Springs, pendulums, tuning forks and the suspension in a car all oscillate in approximately simple harmonic motion.

  • Engineers design ramps, ski runs and roller-coaster drops from the incline model, then add friction and resistance.

  • Rockets and launches: the thrust and the falling mass make the force non-constant, so the motion is modelled with differential equations.

Save your progress with a free account