Lesson 6 of 8 · 20 min

Forces that vary with time, position or speed

Model straight-line motion under a non-constant force by writing the equation of motion with the right form of acceleration, then separating and integrating.

What you will be able to do

  • Write an equation of motion m×(acceleration)=Fm \times (\text{acceleration}) = F when FF depends on tt, xx or vv.
  • Solve it by integrating or separating variables, using initial conditions to find each constant.
  • Interpret the solution, including what happens in the long run and where the model stops applying.

Constant forces are the exception. A rocket's thrust changes as it burns fuel, a charged particle is repelled less strongly as it moves away, and water drags harder on a fast boat than a slow one. When the force depends on time, position or velocity, the acceleration does too, and the constant acceleration equations are useless.

The method is always the same: write Newton's second law with a form of acceleration that matches what the force depends on, then solve the differential equation.

Modelling with a non-constant force

  1. Draw a diagram and choose the positive direction

  2. Write the equation of motion

    m×(acceleration)=m \times (\text{acceleration}) = resultant force, using dvdt\frac{dv}{dt} for F(t)F(t), vdvdxv\frac{dv}{dx} for F(x)F(x), and either for F(v)F(v) depending on whether tt or xx is wanted.

  3. Separate the variables and integrate

    Keep a constant of integration (call it AA or kk).

  4. Use the initial conditions

    Find the constant straight away, then rearrange for the quantity asked for.

  5. Interpret

    Answer in context with units. Check the long-run behaviour and the sign of vv.

Force depending on time. This is the Methods case: dvdt=F(t)m\frac{dv}{dt} = \frac{F(t)}{m}, so integrate with respect to tt.

A particle of mass 22 kg starts from rest at the origin. A force F=12cos⁡(3t)F = 12\cos(3t) N acts on it along its line of motion. Determine its velocity v(t)v(t).

v(t) =
Reads asYour answer shows here as maths.

Force depending on position. Springs, gravity between bodies and electric forces depend on distance. Use mvdvdx=F(x)mv\frac{dv}{dx} = F(x) and integrate with respect to xx to get vv in terms of xx.

Worked example

A particle repelled by an inverse-square force

  • Complex familiar
  • Technology free

A particle of mass 0.50.5 kg moves along the positive xx-axis, repelled from the origin by a force of 2x2\frac{2}{x^2} N, where xx m is its distance from OO. It is released from rest at x=1x = 1.

(a) Determine its speed when x=4x = 4. (b) Show that its speed can never exceed 22 m s−12\sqrt{2}\ \mathrm{m\,s^{-1}}.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. FF depends on xx: mvdvdx=F(x)mv\frac{dv}{dx} = F(x).

  2. Integrate in xx and use the initial condition.

  3. Read long-run behaviour from the formula for v2v^2.

Watch out for

  • Forgetting to divide the force by the mass.

  • Integrating 4x2\frac{4}{x^2} as 4ln⁡(x2)4\ln(x^2); it is −4x-\frac{4}{x}.

Force depending on velocity. Resistance from air or water grows with speed. Use mdvdt=F(v)m\frac{dv}{dt} = F(v) and separate to find vv in terms of tt, or mvdvdx=F(v)mv\frac{dv}{dx} = F(v) to find vv in terms of xx.

Interactive

A boat coasting against water resistance

A motorboat cuts its engine at 20 m s−120\ \mathrm{m\,s^{-1}} and the water slows it with a=−0.02v2a = -0.02v^2. The velocity falls quickly at first, then more and more slowly; in this model it never quite reaches zero, and the displacement keeps creeping up like a logarithm. Real boats stop because other forces take over at low speed.

Worked example

A motorboat coasting against water resistance

  • Complex unfamiliar

A motorboat is travelling at 20 m s−120\ \mathrm{m\,s^{-1}} when its engine is cut. The water then slows it with acceleration a=−0.02v2 m s−2a = -0.02v^2\ \mathrm{m\,s^{-2}}.

(a) How long does it take to slow to 5 m s−15\ \mathrm{m\,s^{-1}}? (b) How far does it travel in that time? (c) Comment on what the model predicts about the boat stopping.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. a=f(v)a = f(v): dvdt\frac{dv}{dt} for time, vdvdxv\frac{dv}{dx} for distance.

  2. Separate, integrate, apply the initial condition.

  3. Interpret the long-run behaviour and the limits of the model.

Watch out for

  • Using the constant acceleration equations with a=−0.02×202a = -0.02 \times 20^2.

  • Getting the time from the distance formula: vdvdxv\frac{dv}{dx} has no tt in it.

A puck slides across a horizontal surface with acceleration a=−2v m s−2a = -2v\ \mathrm{m\,s^{-2}}. Its initial velocity is 10 m s−110\ \mathrm{m\,s^{-1}}. How far has it travelled when its velocity has dropped to 2 m s−12\ \mathrm{m\,s^{-1}}?

in m

Common mistake

No constant acceleration equations here

Once the force depends on tt, xx or vv, the acceleration is not constant, so v=u+atv = u + at and v2=u2+2axv^2 = u^2 + 2ax are wrong. Every one of these problems starts from a differential equation.

Tip

Divide by v with care

In vdvdx=−kvv\frac{dv}{dx} = -kv you may cancel vv only while v≠0v \neq 0. That is fine while the body is moving, but say so, and remember the model only describes the motion until the body stops.

Exam tip

With technology

On Paper 2 you may meet an equation of motion whose integral you cannot do by hand. Separate the variables, then evaluate the definite integral numerically on your calculator: for example, the time to slow from uu to ww is ∫wu1∣f(v)∣ dv\int_w^u \frac{1}{|f(v)|}\,dv. Write the integral down before evaluating it.

Summary

  • Equation of motion: m×m \times acceleration == resultant force, with the form of acceleration chosen to match the force.

  • F(t)F(t): mdvdt=F(t)m\frac{dv}{dt} = F(t), integrate in tt. F(x)F(x): mvdvdx=F(x)mv\frac{dv}{dx} = F(x), integrate in xx.

  • F(v)F(v): separate mdvdt=F(v)m\frac{dv}{dt} = F(v) for time, or mvdvdx=F(v)mv\frac{dv}{dx} = F(v) for distance.

  • Find constants from the initial conditions as soon as they appear.

  • Interpret the long-run behaviour and the limits of the model.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 6 of 80% read

Save your progress with a free account