Lesson 8 of 8 · 22 min

Air resistance and terminal velocity

Model bodies falling and rising against air resistance proportional to vv or v2v^2, and find their velocity, distance travelled, greatest height and terminal velocity.

What you will be able to do

  • Write the equation of motion for a body falling or rising with resistance kvkv or kv2kv^2.
  • Find the terminal velocity by setting the acceleration to zero, and show that the velocity approaches it.
  • Solve the equation of motion for velocity in terms of time or displacement, including the greatest height of a rising body.

A skydiver who jumps from a plane does not keep speeding up. After about 12 seconds they are falling at a steady 55 m s−155\ \mathrm{m\,s^{-1}} or so: the air pushes up on them as hard as gravity pulls down. Without air resistance they would reach that speed in under 6 seconds and keep accelerating. Air resistance is a force that depends on velocity, so this is a job for the forms of acceleration from earlier in the topic.

Key idea

Equations of motion with resistance

A body of mass mm moves vertically and air resistance RR opposes its motion. Two common models are R=kvR = kv (small, slow objects) and R=kv2R = kv^2 (larger, faster objects), with k>0k > 0.

  • Falling, down positive: mdvdt=mg−Rm\frac{dv}{dt} = mg - R
  • Rising, up positive: mdvdt=−mg−Rm\frac{dv}{dt} = -mg - R

When rising, gravity and resistance both act downwards. When falling, resistance acts upwards, against gravity.

Definition

Terminal velocity

As a falling body speeds up, RR grows until it balances the weight. Then the acceleration is zero and the velocity stops changing. Setting mg−R=0mg - R = 0:

vT=mgk  for R=kv,vT=mgk  for R=kv2v_T = \frac{mg}{k} \ \text{ for } R = kv, \qquad v_T = \sqrt{\frac{mg}{k}} \ \text{ for } R = kv^2

The body approaches vTv_T but, in these models, never quite reaches it.

Interactive

Velocity approaching terminal velocity

The horizontal axis is time tt and the vertical axis is velocity vv for a falling body with a=9.8−0.2va = 9.8 - 0.2v. Every solution curve approaches the horizontal line v=49v = 49, the terminal velocity: from below for a body dropped from rest, and from above for a body thrown down faster than 49 m s−149\ \mathrm{m\,s^{-1}}.

A small parcel falls with acceleration a=9.8−0.04v2 m s−2a = 9.8 - 0.04v^2\ \mathrm{m\,s^{-2}}, where vv is its downwards velocity. Determine its terminal velocity, correct to two decimal places.

in m s -1

Round to 2 decimal places.

Worked example

Falling with resistance proportional to velocity

  • Complex familiar
  • Technology active

A package is dropped from rest from a helicopter. While it falls, its acceleration is a=9.8−0.2v m s−2a = 9.8 - 0.2v\ \mathrm{m\,s^{-2}}, where vv is its downward velocity.

(a) Determine its terminal velocity. (b) Show that v=49(1−e−0.2t)v = 49\left(1 - e^{-0.2t}\right). (c) Determine how long it takes to reach 90%90\% of its terminal velocity, and how far it has fallen by then, correct to one decimal place.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Terminal velocity: set the acceleration to zero.

  2. Separate dvdt=f(v)\frac{dv}{dt} = f(v) and integrate; apply v(0)v(0).

  3. Integrate v(t)v(t) for the distance, or use vdvdxv\frac{dv}{dx}.

Watch out for

  • Losing the minus sign: ∫149−v dv=−ln⁡(49−v)\int \frac{1}{49 - v}\,dv = -\ln(49 - v).

  • Thinking the package reaches 49 m s−149\ \mathrm{m\,s^{-1}} at some finite time; it only approaches it.

Velocity against distance fallen, with R=kv2R = kv^2

When a question asks about distance, use vdvdxv\frac{dv}{dx}. Falling with mvdvdx=mg−kv2m v\frac{dv}{dx} = mg - kv^2, separate:

∫mvmg−kv2 dv=∫dx  ⟹  −m2kln⁡∣mg−kv2∣=x+A\int \frac{mv}{mg - kv^2}\,dv = \int dx \implies -\frac{m}{2k}\ln\left|mg - kv^2\right| = x + A

With v=0v = 0 at x=0x = 0, A=−m2kln⁡(mg)A = -\frac{m}{2k}\ln(mg), which rearranges to

v2=mgk(1−e−2kx/m)=vT2(1−e−2kx/m)v^2 = \frac{mg}{k}\left(1 - e^{-2kx/m}\right) = v_T^2\left(1 - e^{-2kx/m}\right)

Again v→vTv \to v_T, this time as the distance fallen grows.

A ball of mass mm is thrown vertically upwards. Air resistance has magnitude kv2kv^2. Taking up as positive, which is the equation of motion while the ball is rising?

Choose one answer

Worked example

Greatest height with resistance proportional to v2v^2

  • Complex unfamiliar
  • Technology active

A ball is thrown vertically upwards at 20 m s−120\ \mathrm{m\,s^{-1}}. While it rises, its acceleration is a=−(9.8+0.01v2) m s−2a = -\left(9.8 + 0.01v^2\right)\ \mathrm{m\,s^{-2}}, with up positive.

Determine the greatest height the ball reaches, correct to two decimal places, and compare it with the greatest height if there were no air resistance.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. a=f(v)a = f(v) and a distance is wanted: vdvdx=f(v)v\frac{dv}{dx} = f(v).

  2. Separate, recognise ∫f′(v)f(v) dv=ln⁡∣f(v)∣\int \frac{f'(v)}{f(v)}\,dv = \ln|f(v)|, apply the initial condition.

  3. Set v=0v = 0 for the greatest height and compare with the model without resistance.

Watch out for

  • Using mv˙=−mg+kv2m\dot{v} = -mg + kv^2: on the way up resistance acts downwards, with gravity.

  • Missing the factor 50=10.0250 = \frac{1}{0.02} when integrating.

A ball is thrown vertically upwards at 20 m s−120\ \mathrm{m\,s^{-1}}. While it rises, its acceleration is a=−(9.8+0.2v) m s−2a = -(9.8 + 0.2v)\ \mathrm{m\,s^{-2}}, with up positive. Determine the time it takes to reach its greatest height, correct to two decimal places.

in s

Round to 2 decimal places.

Common mistake

One equation for the way up, another for the way down

Resistance always opposes the velocity. A body thrown upwards needs mv˙=−mg−Rm\dot{v} = -mg - R until it stops, then mv˙=mg−Rm\dot{v} = mg - R (down positive) as it falls. With resistance, the way down takes longer than the way up, and the body lands slower than it was thrown.

Exam tip

Reasonableness checks

With resistance, every answer should be "less" than without it: lower greatest height, shorter time to the top, smaller speed after a given fall. A terminal velocity must be positive. If your answer breaks one of these, look for a sign error in the equation of motion.

Summary

  • Falling (down positive): mv˙=mg−Rm\dot{v} = mg - R. Rising (up positive): mv˙=−mg−Rm\dot{v} = -mg - R.

  • Terminal velocity: set the acceleration to zero. vT=mgkv_T = \frac{mg}{k} for R=kvR = kv and mgk\sqrt{\frac{mg}{k}} for R=kv2R = kv^2.

  • Use dvdt\frac{dv}{dt} and separate to find vv in terms of tt; use vdvdxv\frac{dv}{dx} to find vv in terms of distance or the greatest height.

  • For R=kvR = kv falling from rest, v=vT(1−e−kt/m)v = v_T(1 - e^{-kt/m}), which approaches vTv_T.

  • Treat the upward and downward parts of a flight separately, and check answers against the no-resistance case.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 8 of 80% read

Save your progress with a free account