Lesson 3 of 8 · 18 min

Four ways to write acceleration

Use dvdt\frac{dv}{dt}, d2xdt2\frac{d^2x}{dt^2}, vdvdxv\frac{dv}{dx} and ddx(12v2)\frac{d}{dx}\left(\frac{1}{2}v^2\right) for acceleration, and choose the form that turns the equation of motion into one you can integrate.

What you will be able to do

  • Show that dvdt=d2xdt2=vdvdx=ddx(12v2)\frac{dv}{dt} = \frac{d^2x}{dt^2} = v\frac{dv}{dx} = \frac{d}{dx}\left(\frac{1}{2}v^2\right).
  • Choose a form of acceleration from what the acceleration depends on (tt, xx or vv) and what the question asks for.
  • Find vv in terms of xx when the acceleration is a function of displacement.

In Methods every acceleration was a function of time: a=6t−2a = 6t - 2, integrate, done. Real forces rarely work like that. A spring pulls harder the further it is stretched, so its acceleration depends on position. Air resistance grows with speed, so that acceleration depends on velocity. If you write dvdt=−4x\frac{dv}{dt} = -4x, you have three variables and nothing to integrate.

The fix is to write acceleration in a different form, one that uses the variables the problem gives you.

Key idea

Four forms of acceleration

For a particle moving in a straight line with displacement xx and velocity vv,

a=dvdt=d2xdt2=vdvdx=ddx(12v2)a = \frac{dv}{dt} = \frac{d^2x}{dt^2} = v\frac{dv}{dx} = \frac{d}{dx}\left(\frac{1}{2}v^2\right)

The first two link aa with time. The last two link aa with displacement, with no tt in sight.

Why vdvdxv\frac{dv}{dx} and ddx(12v2)\frac{d}{dx}\left(\frac{1}{2}v^2\right) are accelerations

Think of vv as a function of xx, and xx as a function of tt. By the chain rule,

a=dvdt=dvdx×dxdt=dvdx×v=vdvdxa = \frac{dv}{dt} = \frac{dv}{dx} \times \frac{dx}{dt} = \frac{dv}{dx} \times v = v\frac{dv}{dx}

Differentiating 12v2\frac{1}{2}v^2 with respect to xx, again by the chain rule,

ddx(12v2)=12×2v×dvdx=vdvdx\frac{d}{dx}\left(\frac{1}{2}v^2\right) = \frac{1}{2} \times 2v \times \frac{dv}{dx} = v\frac{dv}{dx}

So all four expressions are the same acceleration.

Interactive

Acceleration is the gradient of ½v² against x

The curve is 12v2\frac{1}{2}v^2 plotted against displacement xx. Its gradient at any point is the acceleration there, a=2−2xa = 2 - 2x. Where the curve rises the particle speeds up; at its peak (x=1x = 1) the acceleration is zero and the speed is greatest.

Choosing a form
The acceleration is given asYou wantUseThen
a=f(t)a = f(t)vv or xx in terms of ttdvdt=f(t)\frac{dv}{dt} = f(t)Integrate with respect to tt (twice for xx).
a=f(x)a = f(x)vv in terms of xxddx(12v2)=f(x)\frac{d}{dx}\left(\frac{1}{2}v^2\right) = f(x)12v2=∫f(x) dx\frac{1}{2}v^2 = \int f(x)\,dx
a=f(v)a = f(v)vv in terms of ttdvdt=f(v)\frac{dv}{dt} = f(v)Separate: t=∫1f(v) dvt = \int \frac{1}{f(v)}\,dv
a=f(v)a = f(v)vv in terms of xxvdvdx=f(v)v\frac{dv}{dx} = f(v)Separate: x=∫vf(v) dvx = \int \frac{v}{f(v)}\,dv
a=−ω2xa = -\omega^2 xxx in terms of ttd2xdt2=−ω2x\frac{d^2x}{dt^2} = -\omega^2 xSimple harmonic motion: quote the solution.

A particle moves in a straight line with acceleration a=−3x2a = -3x^2, where xx is its displacement. Which equation should you start from to find its velocity in terms of xx?

Choose one answer

Worked example

Velocity from an acceleration that depends on position

  • Simple familiar
  • Technology free

A particle moves in a straight line with acceleration a=2x+1 m s−2a = 2x + 1\ \mathrm{m\,s^{-2}}, where xx m is its displacement from the origin OO. It passes through OO with velocity 2 m s−12\ \mathrm{m\,s^{-1}}. Determine its velocity when x=3x = 3.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Acceleration in terms of xx: use ddx(12v2)\frac{d}{dx}\left(\frac{1}{2}v^2\right) or vdvdxv\frac{dv}{dx}.

  2. Integrate in xx, then find the constant from the initial condition.

  3. Double, take the square root, and choose the sign from the direction of motion.

Watch out for

  • Writing v=x2+x+Av = x^2 + x + A: integrating gives 12v2\frac{1}{2}v^2.

  • Leaving the answer as ±27\pm 2\sqrt{7} without deciding the direction.

A particle starts from rest at the origin and moves in a straight line with acceleration a=6−2x m s−2a = 6 - 2x\ \mathrm{m\,s^{-2}}. Determine v2v^2 in terms of xx.

v 2 =
Reads asYour answer shows here as maths.

A particle moves in a straight line with acceleration a=4x m s−2a = 4x\ \mathrm{m\,s^{-2}}. When x=1x = 1 m its velocity is 2 m s−12\ \mathrm{m\,s^{-1}}. Determine its velocity when x=3x = 3 m, given it is still moving in the positive direction.

in m s -1

Common mistake

Integrating gives ½v², not v

When you integrate vdvdxv\frac{dv}{dx} with respect to xx, the left side becomes 12v2\frac{1}{2}v^2. Forgetting the half, or writing v=∫a dxv = \int a\,dx, is the most common error with these forms. Then take the square root with care: the sign of vv comes from the direction of motion, not from the algebra.

Exam tip

State your form

Begin with a line like "Since aa is a function of xx, use a=vdvdxa = v\frac{dv}{dx}." It earns a method mark, and it tells the marker your next step is deliberate.

Summary

  • a=dvdt=d2xdt2=vdvdx=ddx(12v2)a = \frac{dv}{dt} = \frac{d^2x}{dt^2} = v\frac{dv}{dx} = \frac{d}{dx}\left(\frac{1}{2}v^2\right), by the chain rule.

  • If aa depends on tt, use dvdt\frac{dv}{dt}. If it depends on xx, use vdvdxv\frac{dv}{dx} or ddx(12v2)\frac{d}{dx}\left(\frac{1}{2}v^2\right).

  • If aa depends on vv, use dvdt\frac{dv}{dt} to bring in time, or vdvdxv\frac{dv}{dx} to bring in displacement, then separate the variables.

  • Integrating with respect to xx gives 12v2\frac{1}{2}v^2; double it, take the square root, and choose the sign from the direction of motion.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 3 of 80% read

Save your progress with a free account