Lesson 4 of 8 · 18 min

Writing a vector in terms of other vectors

Express any vector in a triangle, parallelogram or hexagon as a combination of given vectors by finding a route, using midpoints and ratios, and use the result to show lines are parallel.

What you will be able to do

  • Find a route from the tail to the head of a vector through vectors you already know.
  • Use midpoints and ratios to write vectors such as 12(b−a)\frac{1}{2}(\mathbf{b} - \mathbf{a}) or 23a+c\frac{2}{3}\mathbf{a} + \mathbf{c}.
  • Use a vector expression to show that two lines are parallel, or that three points are collinear.

Pick two vectors that aren't parallel, say a\mathbf{a} and b\mathbf{b}. Every vector in the plane can be built from them with scalar multiples, sums and differences.

Shapes are full of these. Know two sides of a parallelogram, and you know every vector in it. The skill is finding a way there.

Writing XY→\overrightarrow{XY} in terms of given vectors

  1. Start at X, finish at Y

    Name the vector you want and mark where it starts and where it ends.

  2. Find a route

    Walk from X to Y along sides whose vectors you know. Any route gives the same answer, so choose the shortest.

  3. Write each leg

    Going along an arrow gives ++ that vector. Going against it gives −- that vector. Part of a side is a fraction of its vector.

  4. Add and simplify

    Collect the multiples of each given vector.

Worked example

The vector to the midpoint of a side

  • Simple familiar
  • Technology free

In triangle OABOAB, OA→=a\overrightarrow{OA} = \mathbf{a} and OB→=b\overrightarrow{OB} = \mathbf{b}. MM is the midpoint of ABAB. Express AB→\overrightarrow{AB}, AM→\overrightarrow{AM} and OM→\overrightarrow{OM} in terms of a\mathbf{a} and b\mathbf{b}.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Write AB→=AO→+OB→=b−a\overrightarrow{AB} = \overrightarrow{AO} + \overrightarrow{OB} = \mathbf{b} - \mathbf{a}.

  2. A midpoint gives half of the side: 12AB→\frac{1}{2}\overrightarrow{AB}.

  3. Add the legs of a route and collect each vector.

Watch out for

  • Writing AB→=a−b\overrightarrow{AB} = \mathbf{a} - \mathbf{b}, which is BA→\overrightarrow{BA}.

  • Writing OM→=12AB→\overrightarrow{OM} = \frac{1}{2}\overrightarrow{AB}, which is the vector from AA to MM, not from OO.

In the triangle from the example, express MB→\overrightarrow{MB} in terms of a\mathbf{a} and b\mathbf{b}. (Type the vectors as a and b.)

overrightarrowMB =
Reads asYour answer shows here as maths.

Key idea

A point dividing a segment in a ratio

If PP lies on ABAB with AP:PB=m:nAP : PB = m : n, then PP is mm+n\frac{m}{m + n} of the way from AA to BB, so

AP→=mm+n AB→.\overrightarrow{AP} = \frac{m}{m + n}\,\overrightarrow{AB}.

The midpoint is the case m=nm = n: AM→=12AB→\overrightarrow{AM} = \frac{1}{2}\overrightarrow{AB}.

AP:PB=2:3AP : PB = 2 : 3, so ABAB is 5 equal parts and AP→=25AB→\overrightarrow{AP} = \frac{2}{5}\overrightarrow{AB}.

Worked example

Points dividing the sides of a parallelogram

  • Complex familiar
  • Technology free

OABCOABC is a parallelogram with OA→=a\overrightarrow{OA} = \mathbf{a} and OC→=c\overrightarrow{OC} = \mathbf{c}. The point PP lies on CBCB with CP:PB=2:1CP : PB = 2 : 1, and QQ is the midpoint of ABAB. Express OP→\overrightarrow{OP}, OQ→\overrightarrow{OQ} and PQ→\overrightarrow{PQ} in terms of a\mathbf{a} and c\mathbf{c}.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Replace the sides of the parallelogram with the given vectors.

  2. Turn each ratio into a fraction of a side: m:nm : n gives mm+n\frac{m}{m+n}.

  3. Route through known points, then collect the a\mathbf{a} and c\mathbf{c} terms.

Watch out for

  • Using 21\frac{2}{1} or 12\frac{1}{2} for a 2:12 : 1 ratio. The fraction of the side is 23\frac{2}{3}.

  • Forgetting to negate OP→\overrightarrow{OP} when the route goes from PP to OO.

ABCDEFABCDEF is a regular hexagon with centre OO, AB→=a\overrightarrow{AB} = \mathbf{a} and BC→=b\overrightarrow{BC} = \mathbf{b}. Express AD→\overrightarrow{AD} in terms of a\mathbf{a} and b\mathbf{b}. (Type the vectors as a and b.)

overrightarrowAD =
Reads asYour answer shows here as maths.

Key idea

Parallel lines and collinear points

If PQ→=kRS→\overrightarrow{PQ} = k\overrightarrow{RS}, then PQPQ is parallel to RSRS, and ∣k∣|k| times as long.

If AB→=kBC→\overrightarrow{AB} = k\overrightarrow{BC}, the two segments are parallel and share the point BB, so they lie along one straight line: AA, BB and CC are collinear.

Proof: the midpoint theorem

Claim. The segment joining the midpoints of two sides of a triangle is parallel to the third side and half as long.

Proof. In triangle OABOAB, let OA→=a\overrightarrow{OA} = \mathbf{a} and OB→=b\overrightarrow{OB} = \mathbf{b}, and let MM and NN be the midpoints of OAOA and OBOB. Then OM→=12a\overrightarrow{OM} = \frac{1}{2}\mathbf{a} and ON→=12b\overrightarrow{ON} = \frac{1}{2}\mathbf{b}, so

MN→=MO→+ON→=−12a+12b=12(b−a).\overrightarrow{MN} = \overrightarrow{MO} + \overrightarrow{ON} = -\tfrac{1}{2}\mathbf{a} + \tfrac{1}{2}\mathbf{b} = \tfrac{1}{2}(\mathbf{b} - \mathbf{a}).

Since AB→=b−a\overrightarrow{AB} = \mathbf{b} - \mathbf{a}, this says MN→=12AB→\overrightarrow{MN} = \frac{1}{2}\overrightarrow{AB}. So MNMN is parallel to ABAB and half its length. ■\blacksquare

In triangle OABOAB, the points PP and QQ lie on OAOA and OBOB with OP→=13OA→\overrightarrow{OP} = \frac{1}{3}\overrightarrow{OA} and OQ→=13OB→\overrightarrow{OQ} = \frac{1}{3}\overrightarrow{OB}. Then PQ→=kAB→\overrightarrow{PQ} = k\overrightarrow{AB}. Find kk.

k =
Reads asYour answer shows here as maths.

Common mistake

Going against the arrow

If your route goes from BB to AA but you know AB→=a\overrightarrow{AB} = \mathbf{a}, that leg is −a-\mathbf{a}. Most marks lost in these questions are a dropped minus sign, so check the direction of every leg against its arrow.

Exam tip

Showing that lines are parallel

To show two lines are parallel, write one vector as a scalar multiple of the other, then say what it means: "MN→=12AB→\overrightarrow{MN} = \frac{1}{2}\overrightarrow{AB}, so MNMN is parallel to ABAB and half its length." For collinear points, also say which point the two segments share.

Summary

  • To write XY→\overrightarrow{XY} in terms of given vectors, walk a route from XX to YY along known vectors and add the legs.

  • Going against an arrow gives the negative of that vector.

  • If AP:PB=m:nAP : PB = m : n, then AP→=mm+nAB→\overrightarrow{AP} = \frac{m}{m+n}\overrightarrow{AB}; a midpoint gives 12AB→\frac{1}{2}\overrightarrow{AB}.

  • PQ→=kRS→\overrightarrow{PQ} = k\overrightarrow{RS} means PQPQ is parallel to RSRS and ∣k∣|k| times as long; with a shared point, the points are collinear.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 4 of 80% read

Save your progress with a free account