Lesson 8 of 8 · 18 min

Polar form and converting between forms

Write a vector in polar form (r,θ)(r, \theta) and convert between polar and Cartesian form, exactly by hand for special angles and to a given accuracy with technology.

What you will be able to do

  • Write a vector as (r,θ)(r, \theta) from its magnitude and direction.
  • Convert from polar to Cartesian form with x=rcos⁡(θ)x = r\cos(\theta) and y=rsin⁡(θ)y = r\sin(\theta).
  • Convert from Cartesian to polar form with r=x2+y2r = \sqrt{x^2 + y^2} and tan⁡(θ)=yx\tan(\theta) = \frac{y}{x}, by hand for exact values and with technology otherwise.

A pilot isn't told "fly 300 km east and 400 km north". They're told "fly 500 km on this heading". That is polar form: a vector given by its magnitude and its direction instead of its components.

Both descriptions pin down the same vector, so you need to move between them confidently.

Definition

Polar form

A vector in polar form is written (r,θ)(r, \theta), where r=∣a∣r = |\mathbf{a}| is its magnitude and θ\theta is its direction, measured anticlockwise from the positive xx-axis.

For example, (5,53.13∘)(5, 53.13^\circ) is the same vector as 3i^+4j^3\hat{\mathbf{i}} + 4\hat{\mathbf{j}}. The angle can be in radians too: (2,π3)=i^+3 j^\left(2, \frac{\pi}{3}\right) = \hat{\mathbf{i}} + \sqrt{3}\,\hat{\mathbf{j}}.

Questions usually say which interval θ\theta should be in, commonly 0∘≤θ<360∘0^\circ \le \theta < 360^\circ or −180∘<θ≤180∘-180^\circ < \theta \le 180^\circ.

The components are the sides of a right-angled triangle with hypotenuse rr: x=rcos⁡(θ)x = r\cos(\theta) and y=rsin⁡(θ)y = r\sin(\theta).

Polar to Cartesian
x=rcos⁡(θ),y=rsin⁡(θ)x = r\cos(\theta), \quad y = r\sin(\theta)

Worked example

Polar to Cartesian: (6,150∘)(6, 150^\circ)

  • Simple familiar
  • Technology free

Write the vector a=(6,150∘)\mathbf{a} = (6, 150^\circ) in Cartesian form, with exact components.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find the acute reference angle from the quadrant.

  2. Use exact values for the sizes rcos⁡(α)r\cos(\alpha) and rsin⁡(α)r\sin(\alpha).

  3. Attach signs from the quadrant, then check that x2+y2=r\sqrt{x^2 + y^2} = r.

Watch out for

  • Swapping sine and cosine. The xx-component uses cosine.

  • Forgetting the negative sign on the xx-component in the second quadrant.

Write (4,45∘)(4, 45^\circ) in Cartesian form, xi^+yj^x\hat{\mathbf{i}} + y\hat{\mathbf{j}}, with exact components.

Cartesian to polar
r=x2+y2,tan⁡(θ)=yxr = \sqrt{x^2 + y^2}, \quad \tan(\theta) = \frac{y}{x}
Interactive

One vector, two descriptions

Here a=−3i^+3j^\mathbf{a} = -3\hat{\mathbf{i}} + 3\hat{\mathbf{j}}, so r=32r = 3\sqrt{2} and θ=135∘\theta = 135^\circ. Drag it and watch the components and the polar form change together.

Worked example

Cartesian to polar: −i^−3 j^-\hat{\mathbf{i}} - \sqrt{3}\,\hat{\mathbf{j}}

  • Complex familiar
  • Technology free

Write b=−i^−3 j^\mathbf{b} = -\hat{\mathbf{i}} - \sqrt{3}\,\hat{\mathbf{j}} in polar form (r,θ)(r, \theta), with −180∘<θ≤180∘-180^\circ < \theta \le 180^\circ.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. r=x2+y2r = \sqrt{x^2 + y^2}.

  2. Reference angle from tan⁡(α)=∣yx∣\tan(\alpha) = \left|\frac{y}{x}\right| and exact values.

  3. Use the quadrant and the required interval to find θ\theta.

  4. Check with x=rcos⁡(θ)x = r\cos(\theta) and y=rsin⁡(θ)y = r\sin(\theta).

Watch out for

  • Giving θ=60∘\theta = 60^\circ, which points into the first quadrant.

  • Giving 240∘240^\circ when the question asks for −180∘<θ≤180∘-180^\circ < \theta \le 180^\circ.

In polar form with 0∘≤θ<360∘0^\circ \le \theta < 360^\circ, the vector c=2i^−2j^\mathbf{c} = 2\hat{\mathbf{i}} - 2\hat{\mathbf{j}} is

Choose one answer

Without technology

Works when the angle is a multiple of 30∘30^\circ or 45∘45^\circ (or π6\frac{\pi}{6}, π4\frac{\pi}{4}).

Sketch the vector, find the acute reference angle α\alpha from exact values, then use the quadrant to fix the signs of the components, or the size of θ\theta.

With technology

Use  \sqrt{\ } and tan⁡−1\tan^{-1}, or the calculator's polar–rectangular conversion functions (often labelled Pol( and Rec(, or R▸Pr( and R▸Pθ( in an angle menu).

Set degree or radian mode first, and check the quadrant against a sketch. Conversion functions usually give −180∘<θ≤180∘-180^\circ < \theta \le 180^\circ.

Worked example

Converting with technology

  • Simple familiar
  • Technology active

(a) Convert (7.5,212∘)(7.5, 212^\circ) to Cartesian form, giving each component correct to two decimal places.

(b) Convert d=4i^−9j^\mathbf{d} = 4\hat{\mathbf{i}} - 9\hat{\mathbf{j}} to polar form with 0∘≤θ<360∘0^\circ \le \theta < 360^\circ, giving rr to two decimal places and θ\theta to one decimal place.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Set degree or radian mode to match the question.

  2. Predict the signs or the quadrant from a sketch.

  3. Convert, then round only the final values.

  4. Adjust θ\theta into the interval the question asks for.

Watch out for

  • Giving θ=−66.0∘\theta = -66.0^\circ when the question asks for 0∘≤θ<360∘0^\circ \le \theta < 360^\circ.

  • Rounding rr before using it again, which can change the last digit of later answers.

Convert (12,200∘)(12, 200^\circ) to Cartesian form, giving each component correct to two decimal places.

Common mistake

Degree or radian mode

In radian mode, cos⁡(150)\cos(150) is about 0.6990.699, not cos⁡(150∘)≈−0.866\cos(150^\circ) \approx -0.866. Check the mode before every conversion, and check the signs of your components against the quadrant.

Key idea

Which form to use

Cartesian form is best for adding and subtracting vectors, which comes next in Algebra of vectors in two dimensions. Polar form is best when a vector is given or needed as a size and a direction: navigation, or forces given by their magnitude and angle.

Summary

  • Polar form (r,θ)(r, \theta): magnitude rr, direction θ\theta anticlockwise from the positive xx-axis.

  • Polar to Cartesian: x=rcos⁡(θ)x = r\cos(\theta), y=rsin⁡(θ)y = r\sin(\theta).

  • Cartesian to polar: r=x2+y2r = \sqrt{x^2 + y^2} and tan⁡(θ)=yx\tan(\theta) = \frac{y}{x}, adjusted for the quadrant.

  • Use exact values for multiples of 30° and 45° without technology; otherwise use a calculator in the right angle mode.

  • Always give θ in the interval the question asks for.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 8 of 80% read

Save your progress with a free account