Lesson 5 of 8 · 18 min

Resultant displacement, velocity and force

Model journeys, currents and pulling forces as vectors, draw the vector triangle, and find the resultant's magnitude and direction with right-angled trigonometry or the cosine and sine rules.

What you will be able to do

  • Draw a vector triangle for a sum of displacements, velocities or forces.
  • Find the magnitude and direction of a resultant with Pythagoras and right-angled trigonometry.
  • Use the cosine and sine rules when the two vectors are not perpendicular.

Two tugboats pull a ship. A swimmer heads across a river while the current carries her downstream. A yacht sails one leg, turns, and sails another. In each case what actually happens is the vector sum, the resultant, and the triangle rule turns it into a triangle you can solve.

Finding a resultant

  1. Sketch the vectors head to tail

    Mark north (or the axes), each vector's size and direction, and the resultant closing the triangle.

  2. Mark the angle inside the triangle

    Work it out from the given directions. It is often not an angle that appears in the question.

  3. Find the magnitude

    Use Pythagoras if the triangle is right-angled, and the cosine rule if it isn't.

  4. Find the direction

    Use right-angled trigonometry, or the sine or cosine rule, to find an angle in the triangle. Then state the direction as a bearing or as an angle from a named direction.

Worked example

A swimmer crossing a river

  • Complex familiar
  • Technology active

A swimmer swims at 1.2 m s−11.2\ \mathrm{m\,s^{-1}} through the water, aiming due north, straight across a river. The current flows due east at 0.5 m s−10.5\ \mathrm{m\,s^{-1}}.

(a) Find her resultant velocity: its magnitude, and its direction as a true bearing.

(b) The river is 60 m wide. How far downstream of her starting point does she land?

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Add the velocities head to tail in a vector triangle.

  2. Use Pythagoras and tan⁡\tan when the triangle is right-angled.

  3. The time to cross uses only the velocity across the river.

Watch out for

  • Using the resultant speed, 1.3, to find the time. The 60 m is measured straight across, so use the speed straight across, 1.2.

  • Giving the angle 22.6∘22.6^\circ without saying it is measured east of north.

Two people pull a crate across a floor, one with a horizontal force of 8 N due east and the other with a horizontal force of 15 N due north. Find the magnitude of the resultant force.

in N

When the two vectors aren't perpendicular, the vector triangle isn't right-angled. You then need the cosine rule for the magnitude and the sine rule (or the cosine rule again) for the direction. Both are on the formula sheet.

The hard part is the angle. Find the angle inside the triangle first.

The yacht turns through 115∘−40∘=75∘115^\circ - 40^\circ = 75^\circ, so the angle inside the triangle at TT is 180∘−75∘=105∘180^\circ - 75^\circ = 105^\circ.

Common mistake

The angle between the directions is not the angle in the triangle

Head to tail, the angle inside the triangle is 180∘180^\circ minus the angle between the two directions. Above, the directions 040∘040^\circ and 115∘115^\circ are 75∘75^\circ apart, so the cosine rule needs 105∘105^\circ. Using 75∘75^\circ gives a resultant that is far too short.

Worked example

A yacht's displacement with the cosine rule

  • Complex familiar
  • Technology active

A yacht sails 30 km on a bearing of 040∘T040^\circ\text{T}, then 45 km on a bearing of 115∘T115^\circ\text{T}. Find the magnitude and true bearing of its displacement from the start, each correct to one decimal place.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Sketch the legs head to tail with north lines at each corner.

  2. Angle inside the triangle: 180∘180^\circ minus the change in direction.

  3. Cosine rule for the magnitude, then the sine rule for an angle.

  4. Add or subtract that angle from the first bearing, keeping unrounded values.

Watch out for

  • Using 75∘75^\circ in the cosine rule, which gives about 47.2 km, much too short.

  • Rounding α\alpha before adding it to 040∘040^\circ, which can change the final digit.

Interactive

How the angle changes the resultant

Keep the lengths of a\mathbf{a} and b\mathbf{b} about the same and change the angle between them. When is ∣a+b∣|\mathbf{a} + \mathbf{b}| largest? When is it smallest?

Two forces of 6 N and 10 N act on an object. Drawn tail to tail, the angle between them is 60∘60^\circ. Find the magnitude of the resultant force.

in N

Tip

Forces act at a point

Two forces acting on an object are usually drawn tail to tail, from the object. To add them, slide one so it starts at the head of the other (the triangle rule), or complete the parallelogram. Either way the resultant has the same effect as the two forces together.

Exam tip

A resultant needs a size and a direction

A full answer to "find the resultant" gives the magnitude, with units, and the direction, as a bearing or an angle from a stated direction. Keep unrounded values in your calculator between steps and round only the final answers.

Summary

  • The resultant of displacements, velocities or forces is their vector sum, found with the triangle rule.

  • Sketch the vector triangle and mark the angle inside it before calculating.

  • Right-angled: Pythagoras for the magnitude, tan⁡\tan for the angle. Otherwise: the cosine rule, then the sine or cosine rule.

  • Head to tail, the angle in the triangle is 180∘180^\circ minus the angle between the directions.

  • State the magnitude with units and the direction with its reference, rounding only at the end.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 80% read

Save your progress with a free account