Lesson 6 of 8 · 16 min
Sketching transformed trig graphs
Sketch and on a given domain, with and without technology, labelling every key feature.
What you will be able to do
- Sketch and by hand on a stated domain.
- Label the mean line, maximum and minimum points, intercepts and endpoints.
- Use technology to check a sketch and to find features that are not exact.
A sketch is not a plot of a hundred points. It shows the shape and labels the features a reader needs: how high and low the graph goes, where it turns, where it crosses the axes and where it stops. For a sine or cosine graph, the key points come every quarter of a period, so five points draw a whole cycle.
Sketching y = a sin(b(x − h)) + k or y = a cos(b(x − h)) + k
Mean line and range
Draw the mean line dashed. The graph stays between and .
Period and quarter-period
Period . Divide it into four equal steps.
Where a cycle starts
At : sine is on the mean line, heading up if (down if ). Cosine is at a maximum if (a minimum if ).
Step through the key points
Each quarter-period moves to the next of mean, max, mean, min (in the order set by the start). Repeat across the whole domain, forwards and backwards from .
Endpoints and intercepts
Substitute the ends of the domain to get the endpoints. Find the -intercept by substituting , and the -intercepts by solving if asked.
Draw and label
Join the points with a smooth wave (rounded at the turning points), and label every key point with exact coordinates.
Worked example
Sketch for
Sketch the graph of for , labelling the mean line, the maximum and minimum points, the endpoints and the -intercepts.
Step 1: Read the features
, , , . The mean line is and the graph runs from to .
Step 2: Period and quarter-period
Period , so the domain holds two cycles. Each quarter-period is .
Step 3: Key points of the first cycle
Sine with starts on the mean line heading up: , , , , .
Step 4: Repeat for the second cycle
Add to each -value: , , , .
Step 5: Find the x-intercepts
Solve , so with . The reference angle is and sine is negative in quadrants 3 and 4:
Each dip below the axis happens between a mean-line point and a minimum, so there are two intercepts per cycle.
Step 6: Draw and label
Draw the dashed mean line, plot the points, join them with a smooth wave from to , and label every key point.
Try it yourself first, then check the working one step at a time.
Answer
Two cycles from to about the mean line : maxima and , minima and , -intercepts , , and . The finished sketch is below.
Method
Mean line, amplitude, period, quarter-period.
Start point from the type of curve and the sign of .
Step through quarter-periods across the domain.
Endpoints and intercepts, then a smooth, labelled curve.
Watch out for
Drawing only one cycle: the period fits twice into .
Finding only two -intercepts by solving on .
The finished sketch for the example: , .
State the coordinates of the minimum point of for .
When is negative, the graph is reflected about its mean line before anything else, so a cosine cycle starts at a minimum and a sine cycle starts on the mean line heading down. A shift moves the starting point to , and the domain may cut a cycle part-way through. Then the endpoints need calculating.
Worked example
Sketch for
Sketch the graph of for . Label the turning points, the endpoints and the -intercepts with exact coordinates.
Step 1: Read the features
, , , . Mean line , range , period , quarter-period .
Step 2: Find where a cycle starts
Cosine with starts its cycle at a minimum, at : the point .
The negative turns the cosine graph upside down, so its maximum becomes a minimum.
Step 3: Step through the quarter-periods
Mean , maximum , mean . The next minimum, at , is beyond the domain.
Step 4: Calculate the endpoints
At : . At : as well (about ).
The domain starts and ends part-way through a cycle, so the endpoints are not key points and have to be calculated.
Step 5: Find the x-intercepts
gives , where . So
also has cosine , but it is less than , outside the domain for the angle.
Step 6: Draw and label
Start at , fall to the minimum, rise through to the maximum, then fall through and stop at .
Try it yourself first, then check the working one step at a time.
Answer
Minimum , maximum , endpoints and , -intercepts and . The finished sketch is below.
Method
With : a cosine cycle starts at a minimum, a sine cycle starts on the mean line heading down.
Step forwards and backwards from to cover the domain.
Calculate endpoints and intercepts exactly.
Watch out for
Starting the cosine cycle at a maximum even though .
Ending the graph at a key point instead of at the end of the domain.
The finished sketch: , .
Predict the maximum, minimum and period before you move a slider, then check.
Find the -intercept of .
Exam tip
What earns the marks on a sketch
Label the mean line, every maximum and minimum point, the axis intercepts and both endpoints, with exact coordinates where possible. Draw endpoints as closed dots and stop the curve there. Put a scale on both axes, with the -axis in multiples of .
Without technology
Work out the mean line, amplitude, period and starting point, step through the quarter-periods, and calculate the endpoints and intercepts with exact values. This is what Paper 1 expects.
With technology
In radian mode, enter the rule and set the window to the domain (for example from to ). Use the calculator's maximum, minimum and zero tools for the key points, then copy the graph and its labelled features onto your page. Paper 2 accepts decimals unless exact values are asked for.
Common mistake
Drawing past the domain
If the domain stops part-way through a cycle, so does the graph. Calculate the endpoint values and mark them with closed dots; don't continue the wave beyond them.
How many complete cycles of are there in ?
Summary
Start from the mean line , the amplitude and the period .
A cycle starts at : on the mean line for sine, at a maximum for cosine (a minimum if ).
Key points come every quarter-period; repeat them across the domain.
Calculate and label the endpoints and intercepts; stop the graph at the ends of the domain.
Use technology to check the shape and to find features that are not exact.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.