Lesson 8 of 8 · 18 min
Modelling periodic change
Build sine and cosine models of tides, Ferris wheels and seasons from their maximum, minimum and period, then use them to predict values and to find when a value is reached.
What you will be able to do
- Find , , and for a periodic situation from its maximum, minimum, period and a known starting point.
- Use a model to predict a value and to find when a value is reached, with and without technology.
- Interpret the parameters in context and comment on the limits of a model.
On Australia's east coast the tide comes in and goes out about twice a day. A harbour master needs to know when the water will be deep enough for a ship to cross the bar at the harbour entrance. Measuring every minute isn't practical, but a trig model built from two facts, the high and low tides, predicts the depth at any time.
Building a sine or cosine model
Define the variables
Say what each letter means, with units and a starting time: " is the depth in metres, hours after midnight".
Mean line and amplitude from the maximum and minimum
and .
Period, then b
The time for one full cycle; . A maximum to the next minimum is half a period.
Choose the form that fits the start
Known time of a maximum: with that time. Known time of a minimum: . Known time it crosses the mean line rising: .
Check the model
Substitute another known value, for example the time of the minimum, and confirm the model gives it.
Worked example
Model the tide and decide when a yacht can leave
At a harbour on a particular day, high tide is 4.6 m at 3 am and the next low tide is 1.4 m at 9 am.
(a) Assuming the depth follows a cosine curve, find a model for the depth metres, hours after midnight.
(b) A yacht needs at least 3.8 m of water to leave the harbour. Between 6 am and 6 pm, when can it leave?
Step 1: Define the variables and choose the form
Let be the depth in metres and the time in hours after midnight. We know when a high tide happens, so use .
Step 2: Mean level and amplitude
and .
Step 3: Period and b
High tide to low tide takes 6 hours, which is half a cycle. So the period is 12 hours and .
Step 4: Horizontal translation and the model
A cosine curve with peaks where the bracket is zero, so put the peak at : .
Step 5: Check with the low tide
At : ✓
Step 6: Find when the depth is exactly 3.8 m
gives .
Let . For , , and there at and . So or , giving or .
The angle also has cosine , but it is less than , which is outside the domain for .
Step 7: Decide which side of those times is deep enough
The next high tide, at , falls between and , so the water is at least 3.8 m deep for .
Between two neighbouring solutions the depth stays on one side of 3.8 m. The high tide in between shows it is the deep side.
Try it yourself first, then check the working one step at a time.
Answer
(a) (b) The yacht can leave between 1 pm and 5 pm.
Method
Define variables; and from the high and low values.
Period from the times; ; at a known maximum.
Check the model with another given value.
Solve for the boundary times, then decide which intervals satisfy the condition.
Watch out for
Using a period of 6 hours: high to low is only half a cycle.
Giving and : they solve the equation but are before 6 am.
Answering "13 and 17" without saying what the times mean.
The depth is at least 3.8 m for two hours either side of each high tide (shaded).
is the time in hours after midnight and is the depth in metres. Set the mean level and amplitude first, then the period, then slide the high tide into place.
The temperature in a town, °C, hours after midnight, is modelled by . Find the temperature at 8 am.
Worked example
How long a Ferris wheel rider is above 40 m
A Ferris wheel has a diameter of 50 m and its centre is 28 m above the ground. It turns at a steady speed, making one revolution every 8 minutes. A rider boards at the lowest point at .
(a) Find a rule for the rider's height, metres, minutes after boarding.
(b) Find the exact height after 3 minutes.
(c) For how long during each revolution is the rider more than 40 m above the ground? Give your answer to the nearest tenth of a minute.
Step 1: Choose the form
The rider starts at the lowest point, a minimum, so use with no horizontal shift.
starts its cycle at a minimum, exactly where the rider boards.
Step 2: Find the parameters
Amplitude = radius = 25, = height of the centre = 28, and the period is 8 minutes, so : Check: at , m, the lowest point ✓.
Step 3: (b) Substitute t = 3
, about 45.7 m.
Step 4: (c) Find when the height is exactly 40 m
gives .
Step 5: Solve in the first revolution with technology
For , . In radian mode, , and the other solution is . Then and .
Step 6: Find the time above 40 m
The top of the ride, at , lies between these times, so the rider is above 40 m from to : about minutes per revolution.
Check reasonableness: 40 m is 12 m above the centre, about halfway up the top half of the wheel, so a bit over a third of each revolution (about 2.7 of 8 minutes) seems right.
Try it yourself first, then check the working one step at a time.
Answer
(a) (b) m, about 45.7 m (c) About 2.7 minutes per revolution.
Method
Radius gives , the centre height gives , the time per revolution gives .
Boarding at the bottom: use with no shift.
For "how long", find the two boundary times in one cycle and subtract.
Watch out for
Using the diameter, 50, as the amplitude.
Using , which puts the rider at the top at .
Leaving the calculator in degree mode.
Tip
Starting at the bottom
A Ferris wheel rider who boards at the lowest point starts at a minimum, so fits with no shift: . If a model starts at a maximum, use ; if it starts on the mean line going up, use .
The height of a rider on a Ferris wheel, metres, minutes after boarding, is . Find the rider's height after 2 minutes.
Note
The limits of a model
Real tides don't follow a perfect cosine: the gap between high tides is about 12 hours 25 minutes, and their heights vary through the month with the Moon. A model built from one day's tides predicts that day well and drifts after that. Say so when a question asks you to evaluate a model, and check its predictions against data where you can.
The hours of daylight on day of the year in a city are modelled by . What does the number 1.8 represent?
Exam tip
Answer in context
Translate answers back into the situation: "the yacht can leave between 1 pm and 5 pm", "about 2.7 minutes in each revolution". Give units, round sensibly, and if the model gives a value that can't be right (a negative depth, a time outside the day), say what that tells you about the model.
Summary
is the average of the maximum and minimum; is half their difference; .
Choose if you know when a maximum happens, for a minimum, for a rising mean-line crossing.
To find when a value is reached, set the model equal to it and solve on the domain of the context.
Define variables with units, answer in context, and comment on how far the model can be trusted.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.