Mathematical Methods · Unit 1 · Topic 4

Trigonometric functions

Measure angles in radians, find arc lengths and sector areas, define sin, cos and tan on the unit circle, use exact values, sketch and transform trig graphs, solve trig equations and model periodic change.

  • 8 lessons
  • 2 h 21 min of lessons
  • 17 worked examples
  • 10 hours in the syllabus
0 of 8

Start here

Radians, arcs and sectors

Lesson 1 of 8 · 18 min

Start the topic

Lessons

8
  1. Radians, arcs and sectors (up next)

    Measure angles in radians, convert between radians and degrees, and find arc lengths, sector areas and perimeters.

  2. The unit circle

    Define sin, cos and tan for any angle using the unit circle, find their signs in each quadrant, and use symmetry, periodicity and the Pythagorean identity.

  3. Exact values

    Find exact values of sine, cosine and tangent at any multiple of π6\frac{\pi}{6} or π4\frac{\pi}{4} from two special triangles, the unit circle and the quadrant signs.

  4. The graphs of sin, cos and tan

    Unroll the unit circle into the graphs of y=sin⁡(x)y = \sin(x), y=cos⁡(x)y = \cos(x) and y=tan⁡(x)y = \tan(x), and sketch them on extended domains with every key feature.

  5. Amplitude, period and shifts

    See how aa, bb, hh and kk change y=asin⁡(b(x−h))+ky = a\sin(b(x - h)) + k and y=acos⁡(b(x−h))+ky = a\cos(b(x - h)) + k, read the features from a rule, and find the rule from a graph.

  6. Sketching transformed trig graphs

    Sketch y=asin⁡(b(x−h))+ky = a\sin(b(x - h)) + k and y=acos⁡(b(x−h))+ky = a\cos(b(x - h)) + k on a given domain, with and without technology, labelling every key feature.

  7. Solving trig equations

    Solve trig equations on a stated domain, exactly with the unit circle and approximately with technology, including multiple angles and equations that need the Pythagorean identity.

  8. Modelling periodic change

    Build sine and cosine models of tides, Ferris wheels and seasons from their maximum, minimum and period, then use them to predict values and to find when a value is reached.

  9. Topic quiz

    Ten questions across the topic, from foundation to complex unfamiliar. Your results feed your mastery.

About this topic

In Year 10, sine, cosine and tangent were ratios of sides in a right-angled triangle, so they only worked for angles between 0∘0^\circ and 90∘90^\circ. This topic turns them into functions that take any angle, measured in radians, and repeat forever. That repetition is what makes them the language of anything periodic: tides, daylight hours, sound waves, a Ferris wheel, the alternating current in your wall socket.

You will measure angles in radians and use them for arcs and sectors, define sin⁡(θ)\sin(\theta), cos⁡(θ)\cos(\theta) and tan⁡(θ)\tan(\theta) on the unit circle, learn the exact values at multiples of π6\frac{\pi}{6} and π4\frac{\pi}{4}, sketch and transform the graphs, solve trig equations on a domain, and build models of real periodic situations. Everything here is used again in Unit 3, where you differentiate and integrate these functions.

Before you start

Builds on Surds and quadratic functions and Functions and relations.

  • Right-angled triangle trigonometry (sin⁡=opphyp\sin = \frac{\text{opp}}{\text{hyp}}, cos⁡=adjhyp\cos = \frac{\text{adj}}{\text{hyp}}, tan⁡=oppadj\tan = \frac{\text{opp}}{\text{adj}}) and Pythagoras' theorem, from Year 10.
  • The circumference 2πr2\pi r and area πr2\pi r^2 of a circle.
  • Simplifying surds and rationalising denominators (Topic 1).
  • Solving quadratic equations by factorising (Topic 1).
  • Function notation, domain and range, and the circle x2+y2=r2x^2 + y^2 = r^2 (Topic 3).

What QCAA says you need to know9 dot points

Circular measure and radian measure

2 hours

Introduction to trigonometric functions

8 hours

Subject matter from the Mathematical Methods General senior syllabus 2025 v1.3 (opens in a new tab), CC BY 4.0 © State of Queensland (QCAA).

The focus areas you can practise on their own. Each one maps to dot points above.

  • Radians and degrees

    Explain what a radian is and convert angles between degrees and radians, exactly and approximately.

    Practise
  • Arcs and sectors

    Use l = rθ and A = ½r²θ to find arc lengths, sector areas and perimeters, and work back to the radius or angle.

    Practise
  • The unit circle

    Read sin, cos and tan from the unit circle, know their signs in each quadrant, and use symmetry and periodicity.

    Practise
  • Exact values

    Find exact values of sin, cos and tan at any integer multiple of π/6 or π/4.

    Practise
  • Graphs of sin, cos and tan

    Sketch and read y = sin(x), y = cos(x) and y = tan(x) on extended domains, with intercepts, turning points and asymptotes.

    Practise
  • Amplitude, period and shifts

    Read amplitude, period, translations and range from a rule, and find the rule of a sine or cosine graph.

    Practise
  • Sketching transformed graphs

    Sketch y = a sin(b(x − h)) + k and y = a cos(b(x − h)) + k on a domain, with key points labelled.

    Practise
  • Solving trig equations

    Solve trig equations on a stated domain, exactly and with technology, including multiple and shifted angles.

    Practise
  • The Pythagorean identity

    Use sin²(A) + cos²(A) = 1 to find one ratio from another and to solve equations.

    Practise
  • Modelling with trig functions

    Build, interpret and solve sine and cosine models of periodic situations such as tides, Ferris wheels and seasons.

    Practise

Worked examples17

All 17

Common mistakes

Calculator in degree mode

Every calculation in this topic is in radians. If sin⁡(1)\sin(1) comes out as 0.01750.0175, your calculator is in degree mode; it should be 0.84150.8415. Check for R or Rad on the screen before Paper 2 starts.

Degrees in a radian formula

l=rθl = r\theta and A=12r2θA = \frac{1}{2}r^2\theta only work with θ\theta in radians. An angle of 60∘60^\circ is π3\frac{\pi}{3}, not 60.

Reading the horizontal translation before factorising

y=sin⁡(2x−π3)=sin⁡(2(x−π6))y = \sin\left(2x - \frac{\pi}{3}\right) = \sin\left(2\left(x - \frac{\pi}{6}\right)\right), so the shift is π6\frac{\pi}{6} to the right, not π3\frac{\pi}{3}. Take out the factor bb first.

Taking the period to be b

The period of y=sin⁡(3x)y = \sin(3x) is 2π3\frac{2\pi}{3}, not 3. The bigger bb is, the shorter the period.

Stopping at the calculator's answer

sin⁡−1\sin^{-1}, cos⁡−1\cos^{-1} and tan⁡−1\tan^{-1} give one angle each. A trig equation on 0≤x≤2π0 \le x \le 2\pi usually has two solutions or more: find the rest with the unit circle.

Not stretching the domain for a multiple angle

To solve sin⁡(2x)=12\sin(2x) = \frac{1}{2} for 0≤x≤2π0 \le x \le 2\pi, solve for 2x2x on 0≤2x≤4π0 \le 2x \le 4\pi first. Solving on 00 to 2π2\pi loses half the solutions.

The wrong sign for the quadrant

The reference angle gives the size of the value; the quadrant gives the sign. cos⁡(2π3)=−12\cos\left(\frac{2\pi}{3}\right) = -\frac{1}{2} because cosine is negative in the second quadrant.

Dividing by sin or cos

Dividing both sides of sin⁡(x)cos⁡(x)=sin⁡(x)\sin(x)\cos(x) = \sin(x) by sin⁡(x)\sin(x) throws away every solution of sin⁡(x)=0\sin(x) = 0. Factorise instead: sin⁡(x)(cos⁡(x)−1)=0\sin(x)(\cos(x) - 1) = 0.

A negative amplitude

Amplitude is a distance, so it is ∣a∣|a|. For y=−3cos⁡(x)y = -3\cos(x) the amplitude is 3; the negative sign reflects the graph.

Joining tan across an asymptote

tan⁡(π2)\tan\left(\frac{\pi}{2}\right) is undefined. Draw the asymptote x=π2x = \frac{\pi}{2} as a dashed line and never join the branches across it.

Exam tips

  1. Paper 1 is technology-free and the formula book has no table of exact values, so know the values at 00, π6\frac{\pi}{6}, π4\frac{\pi}{4}, π3\frac{\pi}{3} and π2\frac{\pi}{2} without hesitation, and how to move them into any quadrant.

  2. Give exact answers (5π6\frac{5\pi}{6}, 32\frac{\sqrt{3}}{2}) unless the question asks for a rounded answer. In Paper 2, round only at the end and to the accuracy asked for.

  3. For an equation on a domain, write the domain for the angle you are solving for (for example 0≤2x≤4π0 \le 2x \le 4\pi), then list every solution in it and no others.

  4. A sketch earns marks for labelled features: intercepts, maximum and minimum points, endpoints of the domain (as closed dots), asymptotes, and a scale on each axis.

  5. "Show that" means every step is written down, including the exact values you used and why the sign is positive or negative.

  6. In modelling questions, define the variables with units ("tt hours after midnight"), check your model against a known value before using it, and answer in context with clock times or units.

  7. Check reasonableness: a sine or cosine value must lie between −1-1 and 11. If your working gives cos⁡(x)=−2\cos(x) = -2, that equation has no solution.

Where this shows up

  • Tide tables predict the water depth in a harbour, so ships know when they can cross a sandbar.

  • Daylight hours and average temperatures rise and fall with the seasons in a roughly sinusoidal pattern.

  • A pure musical note is a sine wave: its period sets the pitch and its amplitude sets the loudness.

  • Household electricity in Australia is alternating current at 50 Hz, a voltage that follows a sine curve fifty times a second.

  • Ferris wheels, engines and wind turbines turn at a steady rate, so heights and positions on them are trig functions of time.

  • Road and rail curves are designed with arc lengths, and sprinklers and windscreen wipers sweep out sectors.

Save your progress with a free account