Lesson 1 of 8 · 18 min
Radians, arcs and sectors
Measure angles in radians, convert between radians and degrees, and find arc lengths, sector areas and perimeters.
What you will be able to do
- Explain what an angle of 1 radian is, and why radians .
- Convert angles between degrees and radians, exactly and approximately.
- Find arc lengths with and sector areas with .
- Work backwards from an arc length or an area to the radius or the angle.
Why is a full turn ? There is no deep reason. The number probably comes from ancient Babylonian astronomy, and it stuck because 360 divides evenly in so many ways.
Mathematics has a more natural unit. A radian measures an angle by the arc it cuts off a circle, counted in radius-lengths. With radians, arc lengths and sector areas have one-line formulas, and in Year 12 the calculus of and only works cleanly in radians.
Definition
One radian
An angle of 1 radian is the angle at the centre of a circle that cuts off an arc equal in length to the radius.
The arc is as long as the radius, so the angle at the centre is 1 radian, about .
How many radius-lengths fit around the whole circle? The circumference is , so exactly of them. A full turn is therefore radians, and a half turn is radians.
On a circle of radius 1, the arc from to the point is exactly as long as the angle in radians. Drag the point: a quarter turn is , a half turn is and a full turn is .
Converting between degrees and radians
Degrees to radians: multiply by
Radians to degrees: multiply by
| Degrees | Radians | Fraction of a turn |
|---|---|---|
Convert to radians. Give an exact answer.
Tip
Radians have no symbol
An angle written with no degree sign is in radians: means 2 radians, about . Before you use a calculator for anything in this topic, set it to radian mode. A quick test: should give , not .
Worked example
Convert between degrees and radians
Convert (a) to radians, giving an exact answer, and (b) to degrees.
Step 1: Multiply the degrees by
Since radians, one degree is radians.
Step 2: Simplify the fraction
(divide top and bottom by 30), so .
Step 3: Multiply the radians by
The cancels. A quicker way to see it: is , so is .
Try it yourself first, then check the working one step at a time.
Answer
(a) (b)
Method
Degrees to radians: multiply by and simplify.
Radians to degrees: multiply by .
Sense-check with benchmarks: , , .
Watch out for
Using the wrong factor: if (a) comes out near 12 000, you multiplied by .
Leaving unsimplified.
Convert 2 radians to degrees, correct to one decimal place.
Radians make arc length almost automatic. An angle of radians cuts off radius-lengths of arc, so the arc length is times the radius.
A sector with angle is the fraction of the whole circle, so its area is that fraction of :
A sector: two radii and an arc. Its perimeter is .
Why there is no 360 in these formulas
In degrees, the same results read
Substitute in radians, using , and the fractions simplify to and . The radian was built from the radius, so the awkward constant disappears.
Common mistake
Degrees in a radian formula
Putting into gives an arc 60 radii long, nearly ten trips round the circle. Convert first: .
Worked example
Arc length, perimeter and area of a sector
A sector of a circle has radius 9 cm and an angle of at the centre. Find, as exact values, (a) the arc length, (b) the perimeter and (c) the area of the sector.
Step 1: Use for the arc
cm
Step 2: Add the two radii for the perimeter
cm
The boundary of a sector is one curved edge (the arc) and two straight edges (the radii).
Step 3: Use for the area
Step 4: Sense-check
is a third of a full turn, so the area should be a third of the circle: ✓
Try it yourself first, then check the working one step at a time.
Answer
(a) cm (b) cm (c)
Method
Make sure is in radians.
Arc: . Perimeter: . Area: .
Check against the fraction of the full circle.
Watch out for
Leaving the two radii out of the perimeter.
Using instead of in the area, or forgetting the .
A sector has radius 6 cm and angle . Find its exact area, in square centimetres.
Worked example
The area cleaned by a windscreen wiper
A windscreen wiper arm is 55 cm long and pivots at one end. The rubber blade covers the outer 40 cm of the arm. The arm sweeps through an angle of . Find the area of windscreen the blade cleans, correct to the nearest square centimetre.
Step 1: Picture the region
The blade sweeps a sector of radius 55 cm, except for a smaller sector of radius cm near the pivot, where there is arm but no blade. The cleaned region is the big sector minus the small one.
Drawing the situation is the key step: the region is not a sector, but it is the difference of two sectors with the same angle.
Step 2: Convert the angle to radians
The sector area formula only works in radians.
Step 3: Subtract the two sector areas
Step 4: Evaluate
Step 5: Check reasonableness
The full sector of radius 55 cm would be about , and the missing piece near the pivot is about , so an answer a little under makes sense.
Try it yourself first, then check the working one step at a time.
Answer
The blade cleans about (exactly ).
Method
Draw the region and describe it in terms of sectors.
Convert the angle to radians.
Add or subtract sector areas, and round only at the end.
Watch out for
Using only the 55 cm radius, which counts the part of the arm with no blade.
Subtracting the radii first: is a different, smaller region.
An arc of a circle with radius 4 cm has length 10 cm. Find the angle it subtends at the centre, in radians.
Summary
An angle of 1 radian cuts off an arc equal to the radius. A full turn is radians, so radians .
Degrees to radians: multiply by . Radians to degrees: multiply by .
Arc length , sector area , sector perimeter , all with in radians.
Neither formula is in the formula book, so learn them, and set your calculator to radian mode.
Finished the lesson?
Try the 4 quick checks above and the lesson completes itself, or mark it complete now.