Lesson 5 of 11 · 17 min

The multiplier effect

Explain why a change in an injection changes national income by more than itself, and calculate the simple Keynesian multiplier k=1÷(1−MPC)=1÷MPSk = 1 \div (1 - MPC) = 1 \div MPS and the final change in income.

What you will be able to do

  • Distinguish the marginal propensities to consume and save (MPC, MPS) from the average propensities.
  • Explain the multiplier effect as successive rounds of spending.
  • Calculate the simple multiplier from the MPC or the MPS, and the final change in national income.
  • Work backwards: find the MPC from the multiplier, or the injection needed for a given change in income.

The government spends an extra $10 billion building a rail line. The construction firms pay that $10 billion out as wages, profits and payments to suppliers. The workers and owners who receive it spend some of it, on groceries, cars and holidays, and the shops and firms that receive that spending pay it out as income again. Each dollar of the injection is spent and re-spent, so total income rises by more than $10 billion. This is the multiplier effect.

Definition

The marginal propensities

The marginal propensity to consume (MPC) is the share of an extra dollar of income that is spent, and the marginal propensity to save (MPS) the share saved:

MPC=ΔCΔY,MPS=ΔSΔY,MPC+MPS=1MPC = \frac{\Delta C}{\Delta Y}, \qquad MPS = \frac{\Delta S}{\Delta Y}, \qquad MPC + MPS = 1

(in the simple model, where extra income is either spent or saved). The average propensities, C÷YC \div Y and S÷YS \div Y, describe all of income; the marginal ones describe the change, and it is the change that drives the multiplier.

Round by round. With an MPC of 0.8 and a $10 billion injection:

RoundIncome received ($ billion)Spent (× 0.8)Saved (× 0.2)
110.008.002.00
28.006.401.60
36.405.121.28
45.124.101.02
…………
Total50.0040.0010.00

Each round is 0.8 of the one before, so the rounds shrink and their total settles at $50 billion. The process stops when the extra saving adds up to the original injection: all $10 billion has leaked out as saving.

Interactive

Step through the rounds

Each round is the MPC times the one before. Change the MPC and see how the total changes.

The simple Keynesian multiplier
k=11−MPC=1MPS,ΔY=k×ΔJk = \frac{1}{1 - MPC} = \frac{1}{MPS}, \qquad \Delta Y = k \times \Delta J

Here kk is the multiplier, ΔJ\Delta J is the change in an injection (investment, government spending or exports, or a change in autonomous consumption), and ΔY\Delta Y is the final change in national income. With MPC=0.8MPC = 0.8: k=1÷0.2=5k = 1 \div 0.2 = 5, and ΔY=5×10=$50\Delta Y = 5 \times 10 = \$50 billion, as the table showed.

Where the formula comes from

The rounds form a geometric series with first term ΔJ\Delta J and ratio MPCMPC:

ΔY=ΔJ+MPC⋅ΔJ+MPC2⋅ΔJ+⋯=ΔJ×11−MPC\Delta Y = \Delta J + MPC \cdot \Delta J + MPC^2 \cdot \Delta J + \dots = \Delta J \times \frac{1}{1 - MPC}

because 1+r+r2+⋯=11−r1 + r + r^2 + \dots = \dfrac{1}{1 - r} for 0≤r<10 \le r < 1. And 1−MPC=MPS1 - MPC = MPS.

The marginal propensity to consume is 0.75. Calculate the value of the simple multiplier.

Worked example

Calculate the multiplier and the final change in income

  • Simple familiar
  • Technology free

Demand for Australian education services from overseas students rises, adding $15 billion to exports. The marginal propensity to consume is 0.8.

(a) Calculate the simple multiplier. (b) Calculate the final change in national income. (c) Show the first three rounds of the multiplier process.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. MPS = 1 − MPC.

  2. k = 1 ÷ MPS.

  3. ΔY = k × ΔJ (the first round is already included).

Watch out for

  • Adding the injection again: the answer is $75 billion, not $90 billion.

Key idea

The bigger the MPC, the bigger the multiplier

MPCMPSkk
0.50.52
0.750.254
0.80.25
0.90.110

The more of each extra dollar households spend, the more is passed on in each round. Anything that raises saving (or, in a fuller model, taxes and imports) means more leaks out each round and the multiplier is smaller.

The multiplier works in reverse. A fall in an injection, such as investment falling when business confidence collapses, lowers income by kk times the fall: workers lose income, spend less, and the next round of businesses lose sales. This is why a downturn in one sector can spread through the whole economy, and why governments act quickly when spending collapses.

Business investment falls by $12 billion. The MPS is 0.25. Calculate the change in national income.

in $ billion

Worked example

How much stimulus closes a recessionary gap?

  • Complex unfamiliar
  • Technology active

An economy's real GDP is $60 billion below potential output. The marginal propensity to consume is 0.75. Assume the simple multiplier applies.

(a) Calculate the increase in government spending needed to close the gap. (b) The government instead considers an income tax cut. A tax cut of $T billion raises disposable income by $T billion, of which households spend the MPC share in the first round. Calculate the tax cut needed, and explain why it is larger than the spending increase.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Required injection = required change in income ÷ k.

  2. For a tax cut, the first-round injection is MPC × the tax cut.

Watch out for

  • Assuming a $1 tax cut and $1 of spending have the same effect on AD.

  • Forgetting the simple model ignores time lags, taxes on the extra income and spending on imports, which would make the real multiplier smaller and the stimulus needed larger.

Common mistake

Common slips in multiplier questions

  • Using the APC instead of the MPC. The multiplier depends on what is done with extra income.
  • Adding the injection to k×ΔJk \times \Delta J. The first round is already counted: with k=5k = 5 and ΔJ=10\Delta J = 10, ΔY=50\Delta Y = 50, not 60.
  • Writing k=1÷MPCk = 1 \div MPC. It is 1÷(1−MPC)1 \div (1 - MPC).

Limits of the simple multiplier. The simple model has only one leakage, saving. In a real economy part of each extra dollar is also paid in tax and spent on imports, so more leaks out each round and the multiplier is much smaller than 1÷MPS1 \div MPS suggests. The effect also takes time to work through, and it is smaller when the economy is near full capacity, because extra spending then raises prices more than output. Estimates of the fiscal multiplier for Australia are therefore far below the simple formula's values.

Extension: the multiplier with tax and imports

With marginal propensities to save (MPS), to pay tax (MPT) and to import (MPM), every leakage counts:

k=1MPS+MPT+MPMk = \frac{1}{MPS + MPT + MPM}

With MPS=0.1MPS = 0.1, MPT=0.2MPT = 0.2 and MPM=0.2MPM = 0.2: k=1÷0.5=2k = 1 \div 0.5 = 2, much smaller than the 1÷0.1=101 \div 0.1 = 10 the simple formula gives. The syllabus asks for the simple multiplier; use this only to explain why real multipliers are smaller.

Interactive

Practise the calculation

Given the MPC or MPS and a change in an injection, find kk and the change in national income.

Summary

  • The multiplier effect: an injection becomes income, part of which is spent and becomes someone else's income, round after round.

  • MPC=ΔC÷ΔYMPC = \Delta C \div \Delta Y, MPS=ΔS÷ΔYMPS = \Delta S \div \Delta Y, MPC+MPS=1MPC + MPS = 1.

  • k=1÷(1−MPC)=1÷MPSk = 1 \div (1 - MPC) = 1 \div MPS; the final change in income is ΔY=k×ΔJ\Delta Y = k \times \Delta J.

  • A larger MPC gives a larger multiplier; it works downward for a fall in an injection too.

  • Taxes, imports, time lags and an economy near capacity make real multipliers much smaller than the simple formula.

Finished the lesson?

Try the 2 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 110% read

Save your progress with a free account