Lesson 5 of 9 · 20 min

The tariff diagram and its calculations

Draw a small open economy at the world price, add a tariff, and calculate the new price, domestic production and consumption, imports, tariff revenue and the two welfare-loss triangles.

What you will be able to do

  • Draw domestic demand and supply with the world price, and mark production, consumption and imports under free trade.
  • Show the effect of a tariff, labelling Pw+tP_w + t, Q1Q_1 to Q4Q_4, the revenue and the welfare loss.
  • Calculate the effects of a tariff from linear demand and supply.
  • Explain who gains and who loses, and why the triangles are a loss to the whole economy.

Australia is a small open economy in most markets: it buys too little of most goods to change their world price. It can import as much as it likes at the world price, PwP_w. That one assumption makes the trade diagram simple: the world price is a horizontal line, because foreign supply to Australia is perfectly elastic at that price.

Start with domestic demand (DD) and domestic supply (SS) for a good Australia imports. Without trade, the price would be where they cross, PeP_e. With free trade the price falls to PwP_w, below PeP_e:

  • domestic producers supply only Q1Q_1, where PwP_w meets SS;
  • consumers buy Q2Q_2, where PwP_w meets DD;
  • imports fill the gap: imports =Q2−Q1= Q_2 - Q_1.

Free trade in a small open economy. Domestic producers supply Q1Q_1, consumers buy Q2Q_2, and imports fill the gap.

Adding a tariff. A tariff of tt dollars per unit raises the price of every imported unit to Pw+tP_w + t. Domestic producers can now charge that price too, because buyers have no cheaper option. So the domestic price rises to Pw+tP_w + t, and:

  • domestic production rises along SS from Q1Q_1 to Q3Q_3;
  • consumption falls along DD from Q2Q_2 to Q4Q_4;
  • imports shrink from Q2−Q1Q_2 - Q_1 to Q4−Q3Q_4 - Q_3;
  • the government collects tariff revenue =t×(Q4−Q3)= t \times (Q_4 - Q_3).

A $10 tariff on an illustrative market: demand Qd=120−PQ_d = 120 - P, supply Qs=P−20Q_s = P - 20, world price $40, quantities in thousands of units.

Drawing a tariff diagram

  1. Draw and label the axes

    Price (P) up the side, quantity (Q) along the bottom.

  2. Draw domestic D and S

    Label them "domestic demand" and "domestic supply" (or D and S).

  3. Draw the world price

    A horizontal line PwP_w below where D and S cross. Mark Q1Q_1 on S and Q2Q_2 on D, and bracket imports.

  4. Draw the tariff

    A second horizontal line Pw+tP_w + t above PwP_w, still below the domestic equilibrium. Mark Q3Q_3 on S and Q4Q_4 on D, and bracket the smaller imports.

  5. Shade and label the areas

    The rectangle between the price lines from Q3Q_3 to Q4Q_4 is tariff revenue. The triangle between Q1Q_1 and Q3Q_3 is the production loss; the triangle between Q4Q_4 and Q2Q_2 is the consumption loss.

Common mistake

A tariff moves no curve

The tariff changes the price at which trade happens. Domestic demand and domestic supply stay where they are: producers move along S to Q3Q_3 and consumers along D to Q4Q_4. Drawing a shifted supply curve for a tariff loses the diagram marks.

The government puts a tariff on imports of this good. Show the effect, if any, on the domestic demand and supply curves.

Interactive

Set the tariff

Raise the tariff and watch the price, domestic output, imports, revenue and the two triangles. (Illustrative market: Qd=120−PQ_d = 120 - P, Qs=P−20Q_s = P - 20, Pw=$40P_w = \$40.)

Calculating the effects. With straight-line demand and supply you can find every quantity by substituting a price.

Worked example

The effects of a $10 tariff

  • Simple familiar

In an illustrative small open economy, domestic demand is Qd=120−PQ_d = 120 - P and domestic supply is Qs=P−20Q_s = P - 20, with PP in dollars per unit and QQ in thousands of units. The world price is $40. The government imposes a tariff of $10 per unit.

Calculate domestic production, consumption and imports before and after the tariff, and the tariff revenue.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Substitute PwP_w into QsQ_s and QdQ_d; imports are the difference.

  2. Repeat at Pw+tP_w + t.

  3. Revenue = tariff × imports after the tariff.

Watch out for

  • Using imports before the tariff (60) for revenue.

  • Forgetting that QQ is in thousands, so revenue is $400 000, not $400.

In the market above (Qd=120−PQ_d = 120 - P, Qs=P−20Q_s = P - 20, Pw=$40P_w = \$40), the tariff is raised to $15. How many thousand units are imported?

in thousand units

Who gains and who loses. Compare the areas before and after the tariff, using the letters on the figure below.

  • Consumers lose: they pay $10 more on each of the units they still buy and give up the units they no longer buy. Their surplus falls by A + B + C + D.
  • Domestic producers gain A, the extra producer surplus on output that now sells at the higher price.
  • The government gains C, the tariff revenue.
  • The economy as a whole loses B + D: consumers' losses are larger than the gains of producers and the government by these two triangles.

Area A (not shaded) is the strip between $40 and $50 left of the supply curve: the producers' gain. B is the production loss, C the tariff revenue, D the consumption loss. Consumers lose A + B + C + D.

Key idea

Why B and D are losses

B, the production loss: the units between Q1Q_1 and Q3Q_3 are now made at home at a cost above the world price, when they could have been imported for PwP_w. Resources are wasted making them.

D, the consumption loss: the units between Q4Q_4 and Q2Q_2 were worth more to consumers than they cost the world to supply, but at Pw+tP_w + t they are no longer bought.

The revenue rectangle C is not lost: it moves from consumers to the government (and back to the public through spending or lower taxes). It is a transfer.

Worked example

Who gains and who loses from a tariff, in dollars

  • Complex familiar

In an illustrative market, Qd=200−2PQ_d = 200 - 2P and Qs=3P−50Q_s = 3P - 50 (Q in thousand tonnes, P in $ per tonne). The world price is $30 a tonne and the government imposes a tariff of $10 a tonne.

Calculate the change in consumer surplus, the change in producer surplus, the tariff revenue and the welfare loss, and show that they balance.

Illustrative market. Quantities in thousand tonnes.

6 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Find Q1Q_1, Q2Q_2 at PwP_w and Q3Q_3, Q4Q_4 at Pw+tP_w + t.

  2. ΔCS = −t × (Q₂ + Q₄)/2; ΔPS = t × (Q₁ + Q₃)/2.

  3. Revenue = t(Q₄ − Q₃); each triangle = ½ × t × the change in quantity.

  4. Check: consumer loss = producer gain + revenue + welfare loss.

Watch out for

  • Treating the revenue as part of the welfare loss.

  • Using rectangles instead of trapeziums for the changes in surplus.

With the $15 tariff (price $55, Qs=35Q_s = 35, Qd=65Q_d = 65, free-trade Q1=20Q_1 = 20 and Q2=80Q_2 = 80), calculate the total welfare loss in $ thousand.

in $ thousand

Exam tip

Ad valorem tariffs on the diagram

For an ad valorem tariff, convert it to dollars first: a 25% tariff on a world price of $40 is 0.25×40=$100.25 \times 40 = \$10 a unit, so the new price line is at $50. Then calculate exactly as for a specific tariff.

Summary

  • In a small open economy the world price is horizontal; at PwP_w production is Q1Q_1, consumption Q2Q_2, imports Q2−Q1Q_2 - Q_1.

  • A tariff raises the domestic price to Pw+tP_w + t: production rises to Q3Q_3, consumption falls to Q4Q_4, imports fall to Q4−Q3Q_4 - Q_3. No curve shifts.

  • Tariff revenue =t×(Q4−Q3)= t \times (Q_4 - Q_3), a transfer from consumers to the government.

  • Welfare loss =12t(Q3−Q1)+12t(Q2−Q4)= \tfrac{1}{2} t (Q_3 - Q_1) + \tfrac{1}{2} t (Q_2 - Q_4): wasteful domestic production and purchases forgone.

  • Consumers lose; domestic producers and the government gain less than consumers lose.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 5 of 90% read

Save your progress with a free account