Lesson 9 of 12 · 19 min

Limiting reactants and percentage yield

Decide which reactant runs out first, use it to find the theoretical yield, and compare it with the experimental yield as a percentage yield.

What you will be able to do

  • Determine the limiting reactant from the masses of two reactants.
  • Calculate the theoretical yield from the limiting reactant and the mass of excess reactant left over.
  • Discriminate between experimental and theoretical yield.
  • Calculate percentage yield and explain why it is usually below 100 %.

A cheese sandwich needs two slices of bread and one slice of cheese. With 10 slices of bread and 3 slices of cheese, you can make only 3 sandwiches: the cheese runs out first and 4 slices of bread are left over. The cheese limits how many sandwiches you can make.

Reactions work the same way, except that you count in moles.

Definition

Limiting and excess reactants

The limiting reactant is the reactant that is completely used up first. It decides the maximum amount of product. Any other reactant is in excess: some of it is left over when the reaction stops.

2 HX2+OX2→2 HX2O\ce{2H2 + O2 -> 2H2O}. Four HX2\ce{H2} need only two OX2\ce{O2}, so hydrogen runs out first and one OX2\ce{O2} is left over.

Finding the limiting reactant

  1. Convert each reactant's mass to moles

    n=mMn = \frac{m}{M} for both.

  2. Use the mole ratio to see what one reactant needs

    Calculate the moles of the second reactant needed to use up all of the first.

  3. Compare need with supply

    If more is needed than you have, the second reactant is limiting. If less is needed, the first reactant is limiting and the second is in excess.

  4. Base every product calculation on the limiting reactant

    Use its moles and the mole ratio to find the product.

Worked example

Limiting reactant when hydrogen burns

  • Complex familiar
  • Technology active

2 HX2(g)+OX2(g)→2 HX2O(l)\ce{2H2(g) + O2(g) -> 2H2O(l)}

A mixture of 4.00 g of hydrogen and 16.0 g of oxygen is ignited.

(a) Which reactant is limiting?

(b) What mass of water forms?

(c) What mass of the excess reactant is left over?

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Moles of each reactant.

  2. Moles of one needed to react with all of the other; compare.

  3. Product (and leftover) from the limiting reactant.

Watch out for

  • Choosing hydrogen as limiting because its mass is smaller.

  • Calculating the water from the hydrogen, which gives an impossible 35.7 g.

NX2(g)+3 HX2(g)→2 NHX3(g)\ce{N2(g) + 3H2(g) -> 2NH3(g)}

A reactor contains 14.0 g of nitrogen and 4.00 g of hydrogen. Which reactant is limiting?

Choose one answer

Common mistake

The smaller mass is not always limiting

In the check above, there is less hydrogen by mass (4.00 g against 14.0 g), yet hydrogen is in excess. Mass alone tells you nothing until you convert to moles and apply the mole ratio.

Yield. The theoretical yield is the mass of product calculated from the limiting reactant, assuming it all reacts and nothing is lost. The experimental yield (or actual yield) is the mass you actually collect and weigh. They are rarely the same, so chemists compare them:

Percentage yield (on the formula sheet)
percentage yield=experimental yieldtheoretical yield×100 %\text{percentage yield} = \frac{\text{experimental yield}}{\text{theoretical yield}} \times 100\,\%

Worked example

Percentage yield of aspirin

  • Complex familiar
  • Technology active

Aspirin is made from salicylic acid and excess ethanoic anhydride:

CX7HX6OX3(s)+CX4HX6OX3(l)→CX9HX8OX4(s)+CX2HX4OX2(l)\ce{C7H6O3(s) + C4H6O3(l) -> C9H8O4(s) + C2H4O2(l)}

A student starts with 2.00 g of salicylic acid and collects 1.85 g of dry, pure aspirin. Calculate the theoretical yield and the percentage yield.

4 steps

Try it yourself first, then check the working one step at a time.

Method

  1. The reactant not in excess is limiting.

  2. Theoretical yield from its moles and the mole ratio.

  3. Experimental ÷ theoretical × 100 %.

Watch out for

  • Using the mass ratio 2.00 → 2.00 g as the theoretical yield. The product has a different molar mass.

A reaction has a theoretical yield of 12.5 g. A student collects 10.9 g of dry product. Calculate the percentage yield, to three significant figures.

in \%

Give 3 significant figures.

Note

Why yields are below 100 %

  • The reaction is incomplete: it may be slow, or reach equilibrium before all the reactant is used.
  • Side reactions turn some reactant into unwanted products.
  • Product is lost when it is filtered, transferred, washed or recrystallised.
  • The reactants are impure, so there was less reactant than weighed.

A percentage yield above 100 % means the product is not pure: it is still wet, or contains unreacted reactant or another substance.

Worked example

Limiting reagent and yield in a precipitation investigation

  • Complex unfamiliar
  • Technology active

In an investigation, a student dissolves 3.31 g of lead(II) nitrate and 3.00 g of potassium iodide in separate beakers of water, mixes them, then filters, washes and dries the yellow precipitate:

Pb(NOX3)X2(aq)+2 KI(aq)→PbIX2(s)+2 KNOX3(aq)\ce{Pb(NO3)2(aq) + 2KI(aq) -> PbI2(s) + 2KNO3(aq)}

The dry precipitate has a mass of 3.87 g.

(a) Determine the limiting reactant.

(b) Calculate the theoretical yield and the percentage yield of lead(II) iodide.

(c) A second group obtained 4.50 g from the same masses. Evaluate their result.

5 steps

Try it yourself first, then check the working one step at a time.

Method

  1. Moles of each reactant; compare need with supply through the ratio.

  2. Theoretical yield from the limiting reactant.

  3. Percentage yield; above 100 % means an impure (often wet) product.

Watch out for

  • Using the 1 : 1 ratio and choosing lead(II) nitrate as limiting.

  • Saying a yield over 100 % means the reaction "made extra product".

A student's percentage yield of a precipitate is 78 %. Which of these could explain the low yield? Select all that apply.

Select all that apply.

Summary

  • The limiting reactant is used up first and sets the maximum amount of product; the others are in excess.

  • Find it by comparing moles needed with moles available, using the mole ratio; never by comparing masses.

  • Theoretical yield: calculated from the limiting reactant. Experimental yield: what you actually collect.

  • Percentage yield = experimental ÷ theoretical × 100 %; above 100 % signals an impure or wet product.

Finished the lesson?

Try the 3 quick checks above and the lesson completes itself, or mark it complete now.

Lesson 9 of 120% read

Save your progress with a free account