Lesson 1 of 12 · 16 min
Writing balanced equations with state symbols
Turn a word equation into a balanced chemical equation with correct formulas, coefficients and the state symbols (s), (l), (g) and (aq).
What you will be able to do
- Write a word equation as a formula equation, with diatomic elements and polyatomic ions written correctly.
- Balance an equation by changing coefficients only, never subscripts.
- Add state symbols (s), (l), (g) and (aq) to every species.
- Explain why a balanced equation obeys the law of conservation of mass.
When natural gas burns on a stove, methane and oxygen become carbon dioxide and water. In words:
A word equation tells you what reacts, but not how much. Chemists write equations with formulas and numbers, so the equation works like a recipe: it says exactly how many particles of each substance react and form.
Count the atoms on each side: 1 C, 4 H and 4 O before, and 1 C, 4 H and 4 O after.
In a chemical reaction the atoms are rearranged: bonds break and new bonds form, but no atom is created or destroyed. So every atom on the left must turn up on the right. The balanced equation is
Definition
Law of conservation of mass
In a chemical reaction, the total mass of the products equals the total mass of the reactants. Atoms are rearranged, not created or destroyed, so a balanced equation has the same number of atoms of each element on both sides.
| Part | Example | Meaning |
|---|---|---|
| Coefficient | the 2 in | How many formula units or molecules. It multiplies everything in the formula. |
| Subscript | the 2 in | How many atoms of that element are in one formula. Fixed by the substance. |
| Bracket | The subscript multiplies the whole group: 1 Ca, 2 O, 2 H. | |
| State symbol | (aq) | The physical state: (s), (l), (g), or (aq) for dissolved in water. |
| Arrow | "React to form". Reactants on the left, products on the right. |
How to balance an equation
Write correct formulas for every reactant and product
Use ion charges for ionic compounds. Hydrogen, nitrogen, oxygen and the halogens are diatomic: , , , , , , .
Count the atoms of each element on each side
Make a quick tally. If a polyatomic ion such as appears unchanged on both sides, count it as one unit.
Change coefficients, one element at a time
Start with an element that appears in only one substance on each side. Leave hydrogen and oxygen, and any element that appears on its own, until last.
Use the lowest whole numbers
If every coefficient shares a factor, divide it out. If you have a fraction such as , double everything.
Add state symbols and check
Recount every element. Then add (s), (l), (g) or (aq) to every species.
Worked example
Balance the complete combustion of propane
Propane gas, , is the fuel in a barbecue gas bottle. Write the balanced chemical equation, with state symbols, for its complete combustion at room temperature.
Step 1: Write the formulas
Complete combustion of a hydrocarbon gives carbon dioxide and water. Oxygen is diatomic. The skeleton equation is .
Step 2: Balance carbon
3 C on the left, so put 3 in front of . Still unbalanced: .
Carbon appears in only one substance on each side, so it is the easiest element to start with.
Step 3: Balance hydrogen
8 H on the left, and each has 2 H, so put 4 in front of . Oxygen is still unbalanced: .
Step 4: Balance oxygen last
The right now has O atoms, so the left needs .
Oxygen appears on its own as , so changing its coefficient doesn't upset anything you have already balanced.
Step 5: Add states and check
Propane, oxygen and carbon dioxide are gases; water at room temperature is a liquid. Check: C 3 = 3, H 8 = 8, O 10 = 10.
Try it yourself first, then check the working one step at a time.
Answer
Method
Write formulas; complete combustion gives and .
Balance C, then H, then O.
If the O count is odd, double every coefficient.
Add states and recount.
Watch out for
Writing instead of , or changing to .
Writing for combustion at room temperature: the water condenses, so it is (l) unless the question says steam.
Common mistake
Never change a subscript
To balance , it is tempting to write on the right. That balances the atoms, but is hydrogen peroxide, a different substance. Subscripts are part of the identity of a substance; only coefficients may change:
Sodium reacts with water to form sodium hydroxide solution and hydrogen gas. Write the balanced equation with state symbols.
Type it like 2H2(g) + O2(g) -> 2H2O(l).
State symbols say what each substance is like under the reaction's conditions. A salt dissolved in water is (aq); water itself is (l), not (aq); a gas given off is (g); a metal or an insoluble solid is (s). Check the solubility table on page 8 of the data book to decide whether an ionic product stays dissolved (aq) or forms a precipitate (s).
| Symbol | State | Typical examples |
|---|---|---|
| (s) | solid | metals, , a precipitate such as |
| (l) | liquid | water, ethanol, mercury, bromine |
| (g) | gas | , , , , steam above 100 °C |
| (aq) | dissolved in water | acids such as , soluble salts such as |
Worked example
Balance aluminium displacing copper from
Aluminium foil reacts with copper(II) sulfate solution to form aluminium sulfate solution and copper metal. Write the balanced equation with state symbols.
Step 1: Work out the formula of aluminium sulfate
Aluminium forms and sulfate is . The lowest common multiple of 3 and 2 is 6, so 2 balance 3 : .
Step 2: Write the unbalanced equation
The skeleton equation is .
Step 3: Balance sulfate as one unit
The sulfate ion is unchanged, so count it as a block: 3 on the right, so on the left.
Treating an unchanged polyatomic ion as a unit means you balance one thing instead of counting S and O separately.
Step 4: Balance the metals
3 Cu on the left now, so on the right; 2 Al on the right, so on the left.
Step 5: Add states and check
Aluminium and copper are solids. Both sulfates are soluble (s in the data book's solubility table), so they are (aq). Check: Al 2 = 2, Cu 3 = 3, 3 = 3.
Try it yourself first, then check the working one step at a time.
Answer
Method
Build ionic formulas from the ion charges.
Count an unchanged polyatomic ion as one unit.
Balance the remaining elements, then add states.
Watch out for
Writing aluminium sulfate as : the charges must cancel.
Forgetting that the 3 outside the bracket multiplies both S and O when you count atoms.
In a blast furnace, iron(III) oxide is reduced by carbon monoxide gas to molten iron and carbon dioxide. Balance the equation, keeping these state symbols:
A student mixes 12.0 g of one solution with 8.0 g of another in a sealed flask. A yellow precipitate forms. What is the total mass of the flask's contents afterwards?
Exam tip
What markers look for
A "balanced chemical equation" earns its marks for correct formulas, correct coefficients (lowest whole numbers) and states on every species. Check the arithmetic by recounting each element at the end, and write an arrow, not .
Summary
Atoms are rearranged in a reaction, never created or destroyed, so mass is conserved and equations must balance.
Write correct formulas first, including diatomic elements such as and .
Balance with coefficients only; changing a subscript changes the substance.
Treat a polyatomic ion that is unchanged on both sides as one unit.
Use the lowest whole-number coefficients, and add (s), (l), (g) or (aq) to every species.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.