Lesson 12 of 12 · 17 min
Fuels, food and industry: energy in society
Evaluate fossil fuels and biofuels by energy output, suitability and combustion products, explain how respiration powers your body, and see how industry cuts its energy use.
What you will be able to do
- Compare fuels by their heat of combustion per mole and per gram.
- Evaluate fuels, including fossil fuels and biofuels, by energy output, suitability for purpose and the products of combustion.
- Explain how cells release energy from food by respiration, and outline Gerty Cori's contribution.
- Describe ways industries apply chemistry to reduce their energy requirements.
Almost all of the energy that moves cars, generates electricity and keeps you alive comes from exothermic reactions with oxygen. Choosing a fuel, for an engine, a power station or your own body, means weighing how much energy it releases against what it leaves behind.
| Fuel | Type | () | () | Energy (kJ per g) |
|---|---|---|---|---|
| Hydrogen, | manufactured | −286 | 2.02 | 142 |
| Methane (natural gas), | fossil | −890 | 16.05 | 55.5 |
| Propane (LPG), | fossil | −2220 | 44.11 | 50.3 |
| Octane (petrol), | fossil | −5470 | 114.26 | 47.9 |
| Methanol, | biofuel or fossil | −726 | 32.05 | 22.7 |
| Ethanol, | biofuel | −1367 | 46.08 | 29.7 |
| Glucose, | food | −2803 | 180.18 | 15.6 |
Burn the same mass of each alcohol. Which heats the water most per gram? Why is every measured value smaller than the data value?
Key idea
Evaluating a fuel
Weigh up at least three things, with data where you can:
- Energy output: per mole, per gram (what matters when the fuel must be carried) or per litre.
- Suitability for purpose: Is it a gas, liquid or solid at the temperature it is used? Can it be stored and transported safely? Does it ignite readily, and is it compatible with the engine or burner?
- Products of combustion: complete combustion gives (a greenhouse gas) and water. Incomplete combustion gives toxic carbon monoxide and soot. Impurities such as sulfur in coal and crude oil give sulfur dioxide, which causes acid rain.
Then judge where the fuel comes from: a fossil fuel is finite and releases carbon locked away for millions of years; a renewable fuel can be regrown.
Fossil fuels (coal, natural gas, petrol, diesel)
High energy per gram, cheap and easy to distribute with existing infrastructure. Non-renewable. Their carbon was taken out of the atmosphere millions of years ago, so burning them adds new . Petrol and diesel can burn incompletely, and sulfur impurities produce .
Biofuels (bioethanol, biodiesel, biogas)
Made from crops or wastes, so renewable. Their carbon was absorbed from the air by plants recently, so over the life cycle they add much less . Ethanol already contains oxygen, so it burns more completely and more cleanly (less CO and soot, almost no sulfur). But ethanol releases less energy per gram than petrol, and growing the crop uses land, water and energy.
Note
What "more efficient" means for biofuels
The syllabus describes biofuels as more efficient and less damaging than fossil fuels. Be precise about which comparison you mean:
- Combustion: a biofuel such as ethanol already contains oxygen, so more of it burns completely, wasting less as carbon monoxide and soot.
- Carbon over the life cycle: the carbon dioxide released was absorbed by the crop a few months earlier, so the net addition to the atmosphere is far smaller.
- Energy per gram: here ethanol is lower than petrol (29.7 against 47.9 kJ per gram in the table), so a car needs more of it to travel the same distance.
A good evaluation names the measure, gives the numbers, and weighs them.
Worked example
Evaluate ethanol and octane as car fuels
Petrol is mostly octane, (). Bioethanol, (), is made by fermenting sugar cane.
(a) Calculate the energy released per gram of each fuel.
(b) Calculate the mass of carbon dioxide released per megajoule (1000 kJ) of energy for each fuel.
(c) Evaluate the two fuels for use in cars.
Step 1: (a) Energy per gram
, so .
, so .
Step 2: (b) Carbon dioxide per megajoule
Octane: , so 1 mol of octane gives 8 mol of () and 5470 kJ: .
Ethanol: 1 mol gives 2 mol of () and 1367 kJ: .
Comparing per megajoule puts the fuels on an equal footing: it is the emitted for the same useful energy.
Step 3: (c) Energy output and suitability
Octane releases about 60 % more energy per gram, so a tank of petrol takes a car further, and engines are built for it. Ethanol is also a liquid that is easy to store and pump, but a car needs more of it per kilometre; it is usually blended with petrol (E10) or used in modified engines.
Step 4: (c) Combustion products
At the exhaust pipe both release the same mass of per megajoule. But the carbon in bioethanol was taken from the air by the sugar cane only months earlier, so over its life cycle it adds far less new than petrol, whose carbon was locked away for millions of years. Ethanol contains oxygen, so it burns more completely (less CO and soot), and it contains no sulfur.
Step 5: (c) Judgement
Bioethanol is the better choice for reducing greenhouse gas emissions and air pollution, and it is renewable, but it gives less energy per gram and growing the crop uses land, water and energy. Blending it with petrol balances energy output with lower net emissions.
Try it yourself first, then check the working one step at a time.
Answer
(a) Octane , ethanol (b) both of per MJ (c) Octane gives more energy per gram; ethanol is renewable, burns more cleanly and has much lower life-cycle , so it is the better choice for emissions, ideally blended with petrol.
Method
Energy per gram = heat of combustion ÷ molar mass.
Compare per unit of energy, not per mole.
Evaluate energy output, suitability and products, then make a judgement with a reason.
Watch out for
Comparing heats of combustion per mole: octane looks four times better, but a mole of octane is 2.5 times heavier.
Giving a judgement without the evidence (numbers) and a limitation.
The heat of combustion of ethanol, , is . How much energy is released when 1.00 g of ethanol burns completely? Give your answer in kJ to three significant figures.
Respiration: the fuel inside you. Your cells "burn" glucose from your food in the exothermic reaction of respiration:
It has the same reactants, products and overall as burning glucose in a flame. The difference is that cells release the energy in many small, enzyme-controlled steps at body temperature, storing much of it in molecules of ATP that power muscles, nerves and the building of new molecules. Without this steady exothermic reaction you couldn't keep your body at 37 °C or move a muscle.
Your body stores glucose as glycogen in the liver and muscles and releases it when blood glucose falls. Hormones keep this in balance: insulin lowers blood glucose by helping cells take it up. In diabetes, the body makes too little insulin or responds poorly to it, so blood glucose stays too high.
History
Gerty Cori (1896–1957)
Gerty Cori, a Czech-born American biochemist, worked out with her husband Carl Cori how the body stores and uses glucose. They showed how glycogen is broken down to glucose 1-phosphate (the "Cori ester"), and described the Cori cycle: lactate made by working muscles is carried to the liver, turned back into glucose and returned to the muscles. They also studied how insulin and adrenaline control these reactions.
In 1947 she became the first woman awarded the Nobel Prize in Physiology or Medicine. Understanding how glucose is stored, released and controlled by hormones underpins how diabetes is understood and treated today, from insulin doses to managing blood glucose during exercise.
Which statement best describes Gerty Cori's contribution?
Industry: using less energy. Heating and pressurising reactors, running furnaces and separating products use enormous amounts of energy, which costs money and, when it comes from fossil fuels, emits greenhouse gases. Chemistry offers ways to need less:
- Catalysts let reactions run fast enough at lower temperatures. The iron catalyst in the Haber process for ammonia is the classic example, and enzymes let biological detergents wash clothes at 30 °C instead of 60 °C.
- Heat recovery: heat exchangers use the heat released by exothermic reactions to warm incoming reactants or raise steam. Sulfuric acid plants export steam and electricity from their own exothermic reactions.
- Cogeneration: one plant produces electricity and uses its waste heat for processing.
- Recycling: making aluminium from recycled cans takes about 5 % of the energy needed to extract it from bauxite ore by electrolysis.
- Better routes: processes redesigned to need fewer steps, lower temperatures or less separation, and electricity from renewable sources.
Which of these reduce the energy an industrial process needs? Select all that apply.
Summary
Compare fuels per gram as well as per mole: hydrogen and methane release the most energy per gram; alcohols less than hydrocarbons.
Evaluate a fuel by energy output, suitability for purpose and its combustion products (CO₂, CO, soot, SO₂).
Biofuels burn more cleanly and their carbon was recently absorbed by plants, but ethanol releases less energy per gram than petrol.
Respiration is the exothermic reaction that releases energy from glucose in small, controlled steps.
Gerty Cori explained how the body stores and releases glucose, knowledge that underpins diabetes treatment.
Industry saves energy and emissions with catalysts, heat recovery, cogeneration and recycling.
Finished the lesson?
Try the 3 quick checks above and the lesson completes itself, or mark it complete now.